Here is my conf file. I wonder if maybe the problem is
intercommunication between region servers?
<configuration>
<property>
<name>hbase.master</name>
<value>hbase-master:60000</value>
<description>The host and port that the
HBase master runs at.
A value of 'local'
runs the master and a regionserver
in a single process.
</description>
</property>
<property>
<name>hbase.rootdir</name>
<value>glusterfs://hbase-master:9000/hbase</value>
<description>The directory shared by region
servers.</description>
</property>
<property>
<name>hbase.cluster.distributed</name>
<value>true</value>
<description>The mode the cluster will be
in. Possible values are
false: standalone and pseudo-distributed
setups with managed
Zookeeper true: fully-distributed with
unmanaged Zookeeper
Quorum (see hbase-env.sh)
</description>
</property>
<property>
<name>hbase.zookeeper.property.clientPort</name>
<value>2222</value>
<description>Property from ZooKeeper's config zoo.cfg.
The port at which the clients will connect.
</description>
</property>
<property>
<name>zookeeper.znode.parent</name>
<value>/hbase-master</value>
</property>
<property>
<name>hbase.zookeeper.quorum</name>
<value>hbase-master,hbase-regionserver1,hbase-regionserver2,hbase-regionserver3</value>
<description>Comma separated list of servers in the
ZooKeeper Quorum.
For example, "host1.mydomain.com,
host2.mydomain.com".
By default this is set to localhost for
local and
pseudo-distributed modes of operation. For
a fully-distributed
setup, this should be set to a ful list of
ZooKeeper quorum
servers. If HBASE_MANAGES_ZK is set in
hbase-env.sh
this is the list of servers which we will
start/stop ZooKeeper on.
</description>
</property>
</configuration>
On Tue, May 21, 2013 at 5:25 PM, Mohammad Tariq <donta...@gmail.com> wrote:
> Is this the only thing which appears on your screen?Could you please show
> me your config files?
>
> Warm Regards,
> Tariq
> cloudfront.blogspot.com
>
>
> On Wed, May 22, 2013 at 2:49 AM, Yves S. Garret
> <yoursurrogate...@gmail.com>wrote:
>
> > This is what happens when I start hbase.
> >
> > $ bin/start-hbase.sh
> > starting master, logging to
> >
> >
> /media/alternative-storage-do-not-touch/hbase-0.94.7/logs/hbase-ysg-master-ysg.connect.out
> >
> > No real problems or error or warnings... but it does not have the same
> > output that you have in your blog... perhaps that's an issue?
> >
> >
> > On Tue, May 21, 2013 at 5:14 PM, Mohammad Tariq <donta...@gmail.com>
> > wrote:
> >
> > > No issues.
> > >
> > > Are the HBase daemons running fine?Are you able to initiate anything
> from
> > > the shell?
> > >
> > > Warm Regards,
> > > Tariq
> > > cloudfront.blogspot.com
> > >
> > >
> > > On Wed, May 22, 2013 at 2:37 AM, Yves S. Garret
> > > <yoursurrogate...@gmail.com>wrote:
> > >
> > > > Hi, sorry, I thought I had more info than what was displayed in my
> > > > e-mail a little earlier today that had the little list, but I did
> not.
> > > >
> > > > My biggest hangup is getting that Web GUI to work. That's really
> > > > where I'm stuck. I followed your tutorial on the cloudfront blog and
> > > > when it came time to go to http://localhost:60010, I did not see an
> > > > output.
> > > >
> > > >
> > > > On Tue, May 21, 2013 at 4:21 PM, Mohammad Tariq <donta...@gmail.com>
> > > > wrote:
> > > >
> > > > > sure..
> > > > >
> > > > > Warm Regards,
> > > > > Tariq
> > > > > cloudfront.blogspot.com
> > > > >
> > > > >
> > > > > On Wed, May 22, 2013 at 1:48 AM, Yves S. Garret
> > > > > <yoursurrogate...@gmail.com>wrote:
> > > > >
> > > > > > Hello,
> > > > > >
> > > > > > No, still having issues. I'll give you some more details in a
> > > second.
> > > > > >
> > > > > >
> > > > > > On Tue, May 21, 2013 at 4:07 PM, Mohammad Tariq <
> > donta...@gmail.com>
> > > > > > wrote:
> > > > > >
> > > > > > > Hey Yves,
> > > > > > >
> > > > > > > I am sorry for being unresponsive. I was travelling and
> > was
> > > > out
> > > > > > of
> > > > > > > reach. What's the current status?Are you good now?
> > > > > > >
> > > > > > > Warm Regards,
> > > > > > > Tariq
> > > > > > > cloudfront.blogspot.com
> > > > > > >
> > > > > > >
> > > > > > > On Tue, May 21, 2013 at 11:15 PM, Asaf Mesika <
> > > asaf.mes...@gmail.com
> > > > >
> > > > > > > wrote:
> > > > > > >
> > > > > > > > Yes.
> > > > > > > >
> > > > > > > > On May 21, 2013, at 8:32 PM, "Yves S. Garret" <
> > > > > > > yoursurrogate...@gmail.com>
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > > Do you mean this?
> > > > > > > > >
> > > > > > > > > http://blog.devving.com/hbase-quickstart-guide/
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Tue, May 21, 2013 at 1:29 PM, Asaf Mesika <
> > > > > asaf.mes...@gmail.com>
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > >> Devving.com has a good tutorial on HBase first setup
> > > > > > > > >>
> > > > > > > > >> On Tuesday, May 21, 2013, Yves S. Garret wrote:
> > > > > > > > >>
> > > > > > > > >>> Hi Mohammad,
> > > > > > > > >>>
> > > > > > > > >>> I was following your tutorial and when I got to the part
> > when
> > > > you
> > > > > > do
> > > > > > > > >>> $ bin/start-hbase.sh, this is what I get:
> > > > > > > > >>> http://bin.cakephp.org/view/428090088
> > > > > > > > >>>
> > > > > > > > >>> I'll keep looking online for an answer, but was I
> supposed
> > to
> > > > do
> > > > > > > > >> something
> > > > > > > > >>> else besides this?
> > > > > > > > >>>
> > > > > > > > >>> This is the contents of my bashrc:
> > > > > > > > >>> http://bin.cakephp.org/view/629885150
> > > > > > > > >>>
> > > > > > > > >>> This is what happens when I run "hadoop version":
> > > > > > > > >>> $ hadoop version
> > > > > > > > >>> Hadoop 1.0.4
> > > > > > > > >>> Subversion
> > > > > > > > >>>
> > > > > >
> > https://svn.apache.org/repos/asf/hadoop/common/branches/branch-1.0-r
> > > > > > > > >>> 1393290
> > > > > > > > >>> Compiled by hortonfo on Wed Oct 3 05:13:58 UTC 2012
> > > > > > > > >>> From source with checksum
> fe2baea87c4c81a2c505767f3f9b71f4
> > > > > > > > >>>
> > > > > > > > >>> No issues, I'm guessing.
> > > > > > > > >>>
> > > > > > > > >>> Not sure where I'm tripping up.
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>> On Fri, May 3, 2013 at 6:52 AM, Mohammad Tariq <
> > > > > donta...@gmail.com
> > > > > > >
> > > > > > > > >> wrote:
> > > > > > > > >>>
> > > > > > > > >>>> Yes..You can do that. I would suggest you to start fresh
> > and
> > > > > > setup a
> > > > > > > > >>> single
> > > > > > > > >>>> node setup first. Once it is working fine, extending it
> to
> > > > > > multiple
> > > > > > > > >>>> machines is just a matter of copying the config files. I
> > > have
> > > > > > > > explained
> > > > > > > > >>> the
> > > > > > > > >>>> procedure here<
> > > > > > > > >>>>
> > > > > > > > >>>
> > > > > > > > >>
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> http://cloudfront.blogspot.in/2012/06/how-to-configure-habse-in-pseudo.html#.UYOWrkAW38s
> > > > > > > > >>>>> .
> > > > > > > > >>>> Try to follow this and hopefully you'll be able to do it
> > > > > properly.
> > > > > > > If
> > > > > > > > >> you
> > > > > > > > >>>> further need any help let us know.
> > > > > > > > >>>>
> > > > > > > > >>>> Warm Regards,
> > > > > > > > >>>> Tariq
> > > > > > > > >>>> https://mtariq.jux.com/
> > > > > > > > >>>> cloudfront.blogspot.com
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>> On Fri, May 3, 2013 at 12:09 AM, Yves S. Garret
> > > > > > > > >>>> <yoursurrogate...@gmail.com>wrote:
> > > > > > > > >>>>
> > > > > > > > >>>>> Hi Tariq, can those two paths be one in the same? I'd
> > like
> > > > to
> > > > > > just
> > > > > > > > >>>>> dump everything into one directory if that's possible.
> > > > > > > > >>>>>
> > > > > > > > >>>>>
> > > > > > > > >>>>> On Wed, May 1, 2013 at 10:15 PM, Mohammad Tariq <
> > > > > > > donta...@gmail.com>
> > > > > > > > >>>>> wrote:
> > > > > > > > >>>>>
> > > > > > > > >>>>>> hbase.rootdir the directory HBase writes data to. I
> you
> > > are
> > > > > > > > >> planning
> > > > > > > > >>> to
> > > > > > > > >>>>>> have a distributed HBase setup then set this property
> to
> > > > some
> > > > > a
> > > > > > > > >>>> directory
> > > > > > > > >>>>>> in your HDFS, like "hdfs://NN_MACHINE:9000/hbase".
> > > Otherwise
> > > > > > point
> > > > > > > > >>> some
> > > > > > > > >>>>> dir
> > > > > > > > >>>>>> on your local FS. And for
> > hbase.zookeper.property.dataDir,
> > > > > > create
> > > > > > > a
> > > > > > > > >>>>>> separate dir outside your HBASE_HOME and as the value.
> > > > > > > > >>>>>>
> > > > > > > > >>>>>> Warm Regards,
> > > > > > > > >>>>>> Tariq
> > > > > > > > >>>>>> https://mtariq.jux.com/
> > > > > > > > >>>>>> cloudfront.blogspot.com
> > > > > > > > >>>>>>
> > > > > > > > >>>>>>
> > > > > > > > >>>>>> On Thu, May 2, 2013 at 7:40 AM, Yves S. Garret
> > > > > > > > >>>>>> <yoursurrogate...@gmail.com>wrote:
> > > > > > > > >>>>>>
> > > > > > > > >>>>>>> One more little update.
> > > > > > > > >>>>>>>
> > > > > > > > >>>>>>> I ran this command in HBASE_HOME [ $
> bin/start-hbase.sh
> > > ],
> > > > > > > > >>>>>>> using these configuration settings:
> > > > > > > > >>>>>>> http://bin.cakephp.org/view/1134614486
> > > > > > > > >>>>>>>
> > > > > > > > >>>>>>> After I rand it, I checked
> > > > > > > > >>>>>>> $HBASE_HOME/logs/hbase-ysg-master-ysg.connect.log and
> > > > > > > > >>>>>>> this is what I saw:
> > > > > > > > >>>>>>> http://bin.cakephp.org/view/823736802
> > > > > > > > >>>>>>>
> > > > > > > > >>>>>>> I hope that sheds some light for you guys.
> > > > > > > > >>>>>>>
> > > > > > > > >>>>>>>
> > > > > > > > >>>>>>> On Wed, May 1, 2013 at 10:04 PM, Yves S. Garret
> > > > > > > > >>>>>>> <yoursurrogate...@gmail.com>wrote:
> > > > > > > > >>>>>>>
> > > > > > > > >>>>>>>> Hi guys, one more question.
> > > > > > > > >>>>>>>>
> > > > > > > > >>>>>>>> I'm looking at this <
> > > > > > > > >>> http://hbase.apache.org/book/quickstart.html>
> > > > > > > > >>>>>> link
> > > > > > > > >>>>>>>> in section 1.2.1 and where I have to modify
> > > > > > > > >>>>>>>> conf/hbase-site.xml, for parts hbase.rootdir and
> > > > > > > > >>>>>>>> hbase.zookeper.property.dataDir, to what should I
> set
> > > > > > > > >>>> hbase.rootdir?
> > > > > > > > >>>>>>>> At the moment, I have hbase.rootdir set to
> > > > > > > > >>>>>>>> /media/alternative-storage-do-not-touch/zookeeper.
> Is
> > > > that
> > > > > > > > >> fine?
> > > > > > > > >>>>>>>> Also, for hbase.zookeper.property.dataDir, I
> currently
> > > > have
> > > > > it
> > > > > > > > >>> set
> > > > > > > > >>>> to
> > > > > > > > >>>>>>>> ${HBASE_HOME}/bin/hbase, does that make sense?
> > > > > > > > >>>>>>>>
> > > > > > > > >>>>>>>> I realize that some of these questions could be
> > > annoying,
> > > > > but
> > > > > > > > >> I'd
> > > > > > > > >>>>>>>> like to make sure that I'm on the right track and
> > don't
> > > > > screw
> > > > > > > > >>>>>>>> something up, ge
> > > > > > > > >>
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
--
Jay Vyas
http://jayunit100.blogspot.com
