Thanks, I also confirmed that the partition discovery is slow by writing a
non-Spark application that uses the parquet library directly to load that
partitions.
It's so slow that my colleague's Python application can read the entire
contents of all the parquet data files faster than my application can even
discover the partitions!
On Fri, Aug 7, 2015 at 2:09 AM, Cheng Lian <lian.cs....@gmail.com> wrote:
> However, it's weird that the partition discovery job only spawns 2 tasks.
> It should use the default parallelism, which is probably 8 according to the
> logs of the next Parquet reading job. Partition discovery is already done
> in a distributed manner via a Spark job. But the parallelism is
> mysteriously low...
>
> Cheng
>
>
> On 8/7/15 3:32 PM, Cheng Lian wrote:
>
> Hi Philip,
>
> Thanks for providing the log file. It seems that most of the time are
> spent on partition discovery. The code snippet you provided actually issues
> two jobs. The first one is for listing the input directories to find out
> all leaf directories (and this actually requires listing all leaf files,
> because we can only assert that a directory is a leaf one when it contains
> no sub-directories). Then partition information is extracted from leaf
> directory paths. This process starts at:
>
> 10:51:44 INFO sources.HadoopFsRelation: Listing leaf files and directories
> in parallel under: file:/home/pweaver/work/parquet/day=20150225, …
>
> and ends at:
>
> 10:52:31 INFO scheduler.TaskSchedulerImpl: Removed TaskSet 0.0, whose
> tasks have all completed, from pool
>
> The actual tasks execution time is about 36s:
>
> 10:51:54 INFO scheduler.TaskSetManager: Starting task 0.0 in stage 0.0
> (TID 0, lindevspark5, PROCESS_LOCAL, 3087 bytes)
> …
> 10:52:30 INFO scheduler.TaskSetManager: Finished task 0.0 in stage 0.0
> (TID 0) in 36107 ms on lindevspark5 (1/2)
>
> You mentioned that your dataset has about 40,000+ partitions, so there are
> a lot of leaf directories and files out there. My guess is that the local
> file system spent lots of time listing FileStatus-es of all these files.
>
> I also noticed that Mesos job scheduling takes more time then expected. It
> is probably because this is the first Spark job executed in the
> application, and the system is not warmed up yet. For example, there’s a 6s
> gap between these two adjacent lines:
>
> 10:51:45 INFO scheduler.TaskSchedulerImpl: Adding task set 0.0 with 2 tasks
> 10:51:51 INFO mesos.CoarseMesosSchedulerBackend: Mesos task 0 is now
> TASK_RUNNING
>
> The 2nd Spark job is the real Parquet reading job, and this one actually
> finishes pretty quickly, only 3s (note that the Mesos job scheduling
> latency is also included):
>
> 10:52:32 INFO scheduler.DAGScheduler: Got job 1 (parquet at App.scala:182)
> with 8 output partitions
> …
> 10:52:32 INFO scheduler.TaskSetManager: Starting task 0.0 in stage 1.0
> (TID 2, lindevspark4, PROCESS_LOCAL, 2058 bytes)
> 10:52:32 INFO scheduler.TaskSetManager: Starting task 1.0 in stage 1.0
> (TID 3, lindevspark5, PROCESS_LOCAL, 2058 bytes)
> 10:52:32 INFO scheduler.TaskSetManager: Starting task 2.0 in stage 1.0
> (TID 4, lindevspark4, PROCESS_LOCAL, 2058 bytes)
> …
> 10:52:34 INFO scheduler.TaskSetManager: Finished task 6.0 in stage 1.0
> (TID 8) in 1527 ms on lindevspark4 (6/8)
> 10:52:34 INFO scheduler.TaskSetManager: Finished task 4.0 in stage 1.0
> (TID 6) in 1533 ms on lindevspark4 (7/8)
> 10:52:35 INFO scheduler.TaskSetManager: Finished task 7.0 in stage 1.0
> (TID 9) in 2886 ms on lindevspark5 (8/8)
>
> That might be the reason why you observed that the C parquet library you
> mentioned (is it parquet-cpp?) is an order of magnitude faster?
>
> Cheng
>
> On 8/7/15 2:02 AM, Philip Weaver wrote:
>
> With DEBUG, the log output was over 10MB, so I opted for just INFO output.
> The (sanitized) log is attached.
>
> The driver is essentially this code:
>
> info("A")
>
> val t = System.currentTimeMillis
> val df = sqlContext.read.parquet(dir).select(...).cache
>
> val elapsed = System.currentTimeMillis - t
> info(s"Init time: ${elapsed} ms")
>
> We've also observed that it is very slow to read the contents of the
> parquet files. My colleague wrote a PySpark application that gets the list
> of files, parallelizes it, maps across it and reads each file manually
> using a C parquet library, and aggregates manually in the loop. Ignoring
> the 1-2 minute initialization cost, compared to a Spark SQL or DataFrame
> query in Scala, his is an order of magnitude faster. Since he is
> parallelizing the work through Spark, and that isn't causing any
> performance issues, it seems to be a problem with the parquet reader. I may
> try to do what he did to construct a DataFrame manually, and see if I can
> query it with Spark SQL with reasonable performance.
>
> - Philip
>
>
> On Thu, Aug 6, 2015 at 8:37 AM, Cheng Lian < <lian.cs....@gmail.com>
> lian.cs....@gmail.com> wrote:
>
>> Would you mind to provide the driver log?
>>
>>
>> On 8/6/15 3:58 PM, Philip Weaver wrote:
>>
>> I built spark from the v1.5.0-snapshot-20150803 tag in the repo and tried
>> again.
>>
>> The initialization time is about 1 minute now, which is still pretty
>> terrible.
>>
>> On Wed, Aug 5, 2015 at 9:08 PM, Philip Weaver < <philip.wea...@gmail.com>
>> philip.wea...@gmail.com> wrote:
>>
>>> Absolutely, thanks!
>>>
>>> On Wed, Aug 5, 2015 at 9:07 PM, Cheng Lian < <lian.cs....@gmail.com>
>>> lian.cs....@gmail.com> wrote:
>>>
>>>> We've fixed this issue in 1.5
>>>> <https://github.com/apache/spark/pull/7396>
>>>> https://github.com/apache/spark/pull/7396
>>>>
>>>> Could you give it a shot to see whether it helps in your case? We've
>>>> observed ~50x performance boost with schema merging turned on.
>>>>
>>>> Cheng
>>>>
>>>>
>>>> On 8/6/15 8:26 AM, Philip Weaver wrote:
>>>>
>>>> I have a parquet directory that was produced by partitioning by two
>>>> keys, e.g. like this:
>>>>
>>>> df.write.partitionBy("a", "b").parquet("asdf")
>>>>
>>>>
>>>> There are 35 values of "a", and about 1100-1200 values of "b" for each
>>>> value of "a", for a total of over 40,000 partitions.
>>>>
>>>> Before running any transformations or actions on the DataFrame, just
>>>> initializing it like this takes *2 minutes*:
>>>>
>>>> val df = sqlContext.read.parquet("asdf")
>>>>
>>>>
>>>> Is this normal? Is this because it is doing some bookeeping to discover
>>>> all the partitions? Is it perhaps having to merge the schema from each
>>>> partition? Would you expect it to get better or worse if I subpartition by
>>>> another key?
>>>>
>>>> - Philip
>>>>
>>>>
>>>>
>>>>
>>>
>>
>>
>
>
>
>
