Hi Alanoud When new computers were added to the VCL, what Provisioning Engine was selected? In particular this case you can check Provision Engine setting for the computer you used on step 5. If you are using KVM, select 'Libvirt Virtualization API'.
-- Thank you, Dmitri Chebotarov VCL Sys Eng, Engineering & Architectural Support, TSD - Ent Servers & Messaging 223 Aquia Building, Ffx, MSN: 1B5 Phone: (703) 993-6175 | Fax: (703) 993-3404 From: Alanoud J <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Friday, April 26, 2013 14:22 To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, Ahmad Diab <[email protected]<mailto:[email protected]>> Subject: Base Image Creation Hi I am working on VCL 2.3 , I have installed KMV as a hypervisor for my VCL First I am trying to Create a Linux Base Image following these steps: 1-Select a module to configure: VCL Image State Module 2-Choose an operation: Capture Base Image 3-Enter the VCL login name or ID of the user who will own the image: 4-Enter your VCL user ID or the user ID of the user you want to own the image. Pressing Enter without entering a user login ID will cause admin to be the owner of the new base image. 5-Enter the hostname or IP address of the computer to be captured: 6-Enter the name or private IP address of the computer which has already added to the VCL database. 7-Select the OS to be captured: 1. VMware Linux 2. VMware Windows 2003 Server 3. VMware Windows 7 4. VMware Windows Server 2008 5. VMware Windows Vista 6. VMware Windows XP But there is no choise for the KVM.???????????? Second, In the create a base image link it has been written that the content of eth0 and eth1 must be : The ifcfg-eth0 file should contain the following: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes The ifcfg-eth1 file should contain the following: DEVICE=eth1 BOOTPROTO=dhcp ONBOOT=yes But ,after installing KVM two bridges have been created br0 and br1 and the content of eth0 and eth1 is not as specified... Finally I want to ask you how I can make sure that the KVM has been installed correctly??? thank you :)
