​what is that ????? On Thu, May 18, 2017 at 12:32 AM, Joseph Fischetti < [email protected]> wrote:
> Enter the IP address of the machine you want to capture > > In this case, the windows 7 machine 192.168.81.131 > > Joseph Fischetti > Linux System Administrator > E-mail: [email protected] > Cell: 845-264-9530 <(845)%20264-9530> > > > > ----- Original message ----- > From: Ariuntulga Kikoo <[email protected]> > To: [email protected] > Cc: > Subject: Re: create windows base image captured failure > Date: Wed, May 17, 2017 11:30 AM > > After running through Andy's steps, all done > but have issue > When i run vcld -setup, and select "create a new base image", what enter > the ip ?? > > manage computer > add computer > (esxi private ip or vm private ip [which > ?????]) on vcl web page > > > > On Tue, May 16, 2017 at 9:04 PM, Joseph Fischetti < > [email protected]> wrote: > > After running through Andy's steps, were you able to make any more > progress? > > The one thing he and I both pointed out was the reference to localhost in > your logs. It seems like your management node was attempting to image > itself, I would think most likely due to misconfigured computer/IP address > settings. > > When you run vcld -setup, and select "create a new base image", what are > you entering as the machine you'd like to capture? > > One thing you'll need to make sure of is that you have ssh set up so that > your management node can communicate with esx and with the guests. I had a > hard time with some things in windows 10 (probably related to username > conflicts), but I don't believe there's any snags related to cygwin and > windows 7. > > Joseph Fischetti > Linux System Administrator > E-mail: [email protected] > Cell: 845-264-9530 <(845)%20264-9530> > > > > ----- Original message ----- > From: Ariuntulga Kikoo <[email protected]> > To: [email protected] > Cc: > Subject: Re: create windows base image captured failure > Date: Tue, May 16, 2017 5:14 AM > > i have 2 hosts. > 1. Centos - VCL management node > 2. ESXi hypervisor with installed windows7 > > i haven't public address > > centos public ipaddress - 192.168.81.130 > private address - 192.168.10.129 > ESXi public ipaddress - 192.168.81.128 > private ipaddress - 192.168.10.130 > ESXi on windows7 ipaddress - 192.168.81.131 > > give me computer information guide on vcl web > > > > > >
