Hi Cameron,
Thanks for your early response.
As instructed by you, I checked out the latest source
code from subversion.
When I tried $ ant setup, Build failed. Following is
the error message that I got. Could you please let me
know how do I need to proceed.
ERROR MESSAGE:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
D:\avalon>ant setup
Buildfile: build.xml
check-magic-home:
declare-magic-home:
setup:
check-magic-home:
declare-magic-home:
setup-proxy:
setup-antlib:
create-magic-home:
[echo] Preparing magic system using C:\Documents
and Settings\SSubramonian/
.magic
[echo] Using home directory: C:\Documents and
Settings\SSubramonian/.magic
[echo] Using cache: C:\Documents and
Settings\SSubramonian/.magic/main
[echo] Using doc repository: C:\Documents and
Settings\SSubramonian/.magic/
docs
[get] Getting:
http://www.dpml.net/avalon/tools/bars/avalon-tools-magic.ba
r
[unzip] Expanding: C:\Documents and
Settings\SSubramonian\.magic\main\avalon
\tools\bars\avalon-tools-magic.bar into C:\Documents
and Settings\SSubramonian\.
magic\main\avalon\tools
[copy] Copying 1 file to C:\Documents and
Settings\SSubramonian\.magic\them
es
[copy] Copying 1 file to C:\Documents and
Settings\SSubramonian\.ant\lib
setup-junit:
setup:
[echo] Setup complete.
BUILD FAILED
java.lang.InternalError: jzentry == 0,
jzfile = 9413336,
total = 79,
name = C:\Documents and
Settings\SSubramonian\.ant\lib\avalon-tools-magic.jar,
i = 17,
message = invalid LOC header (bad signature)
Total time: 12 seconds
D:\avalon>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
regards,
Subbu
--- Cameron Fieber <[EMAIL PROTECTED]> wrote:
> Hi Subbu,
>
> I have recently commited some changes to the JMX
> facility that upgrades
> it to use the latest MX4J release. Unfortunately, I
> still haven't got
> around to writing any end user documentation on it.
>
> Here are some steps that should get you up and
> running, and likely the
> beginnings of the JMX facility user documentation
> ;-). I'll start
> right from scratch as I'm not sure if you are
> looking at the subversion
> version or not:
>
> -= Checkin out the source, building, and setting up
> Merlin =-
>
> First, check out the latest source:
> $ svn co
> http://svn.apache.org/repos/asf/avalon/trunk avalon
> $ cd avalon
>
> Now, initialize the magic buildsystem (this only has
> to be done once):
> $ ant setup
>
> Now, build the various components of merlin and it's
> facilities:
> $ ant
>
> This build will have created a Merlin distribution,
> you can unzip it to
> install it. This is also a one time step. Note that
> the zip resides in
> your local magic repository, a .magic directory in
> your user home
> directory. On unix, check your $HOME directory, in
> Windows, check
> C:\Documents and Settings\<your user name> for that
> directory. unzip the
> zip file to the location you want to install merlin,
> and set the
> environment variables MERLIN_HOME (pointing to the
> merlin directory you
> just unzipped) and add $MERLIN_HOME/bin to your
> path. The full path to
> the zip file is
>
$HOME/.magic/main/avalon/merlin/dist/avalon-merlin-cli-SNAPSHOT.zip.
>
> -= Launching the JMX Facility example =-
> Now that it's all built and you have merlin
> installed, you can play with
> the JMX facility:
> $ cd planet/facilities/jmx
>
> The following command will run the test block, which
> establishes the JMX
> facility, and a single test component that exposes a
> management API:
> $ merlin -repository $HOME/.magic/main
>
test/target/deliverables/blocks/avalon-jmx-test.block
>
> You should see a couple info messages printed on the
> console indicating
> the facility has started, and started HTTP and RMI
> adaptors to the MBean
> server. You can now access the JMX console at
> http://127.0.0.1:8082. If
> you click on the MBean:
>
Merlin:container=jmx,name=test,topic=JMXTestComponentMBean
> it will bring
> up the management interface of the test component.
> Management interfaces
> for a component are currently only determined by
> inspecting the
> component's implemented interfaces for interfaces
> with names ending with
> "MBean". For each "MBean" interface found, an MBean
> is created and
> registered with the MBeanServer by the JMX facility.
> An example of this
> is the JMXTestComponent located in the test
> directory.
>
> I hope this helps, and I hope to have some more
> formalized documentation
> as well as some facility enhancements available in
> the near future. Let
> me know if you run into any problems.
>
> Regards,
>
> -Cameron
>
>
> On Wed, 2004-09-08 at 14:32, S V Subramonian wrote:
> > Hi Peter,
> >
> > I would appreciate if you can let me know the JMX
> > facility that you got. Also please send me if
> there is
> > any to do list document or guide for incorporating
> JMX
> > in Merlin.
> >
> > regards,
> > Subbu
> > --- [EMAIL PROTECTED] wrote:
> >
> > > Hi Subbu,
> > > we have the JMX facility running here, so I
> could
> > > take a look at the demo
> > > next week if no one else has time.
> > >
> > > /peter
> > > >
> >
>
---------------------------------------------------------------------
> > > To unsubscribe, e-mail:
> > > [EMAIL PROTECTED]
> > > For additional commands, e-mail:
> > [EMAIL PROTECTED]
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Read only the mail you want - Yahoo! Mail
> SpamGuard.
> > http://promotions.yahoo.com/new_mail
> >
> >
>
---------------------------------------------------------------------
> > To unsubscribe, e-mail:
> [EMAIL PROTECTED]
> > For additional commands, e-mail:
> [EMAIL PROTECTED]
> >
> >
>
>
>
---------------------------------------------------------------------
> To unsubscribe, e-mail:
> [EMAIL PROTECTED]
> For additional commands, e-mail:
> [EMAIL PROTECTED]
>
>
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
