Hi Warren, You do not (and should not) create any VLANs, CloudStack will create all the VLANs for you.
Remember you cannot use Tagged VLANs for the Management Network with XenServer, so you should set the appropriate Management VLAN at the Switch Port. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -----Original Message----- From: Warren Nicholson [mailto:warren.nichol...@nfinausa.com] Sent: 29 April 2013 21:13 To: users@cloudstack.apache.org Subject: Xenserver VLAN setup for cloudstack When preparing Xenserver for use with Cloudstack: After you set up the IP addresses for the nics, and enter the param-set name labels to match cloudstack, should you also create the VLAN's by using the xe vlan-create command and thus tie to the VLAN's to a specific network/pif uuids? warren This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England & Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
