The old install guide seems to have example configurations for dell and cisco, this might be of help: http://download.cloud.com/releases/3.0.0/CloudStack3.0.0-3.0.2InstallGuide.pdf(page 111)
On Mon, Apr 29, 2013 at 12:38 PM, wq meng <wqm...@gmail.com> wrote: > I have a L3 switch, the model is juniper ex4200. > > But I think the configuration which should be similar to Ciscos switch. > > Not know how to set-up them. > > > I have searched not find any configuration for Cisco switches too. > > > Thank a lot. > > > On Tue, Apr 30, 2013 at 3:32 AM, Chip Childers <chip.child...@sungard.com > >wrote: > > > On Tue, Apr 30, 2013 at 03:30:08AM +0800, wq meng wrote: > > > How kindly show how to set-up advanced network with the VLan > > configuration > > > of a switch. > > > > > > I have searched much, but not find any documents to show how to setup > the > > > VLan for a Advanced network deployment of CS4.01. > > > > > > I am confused by the Vlan setup on the switch side, is all the nodes > > > switch ports has to be changed to be *trunk *mode? > > > > > > And how to tag the Vlan IDs and how to untag them? > > > > > > How to get the node port access all the necessary vlans ? > > > > > > What's the range of Vlan 300 - 500, Shoud I setup all the vlans from > > > 300-500? > > > > > > > > > > > > > > > Thank you very much. > > > > It depends on your switch make / model. > > >
