Hi, Can you quickly check for the following global setting on your management server? I am doubting that the following could be the reason for the errors.
Go to -> Global Settings -> search setting called "host" => Make sure that it is not set to "localhost" instead, it should be set to your mgmt server IP address. Once the above is done then please restart your mgmt server and /etc/init.d/cloudstack-agent restart. Thanks, SWAMY On 06/06/13 5:54 PM, "Er Krishna" <erkris...@gmail.com> wrote: >I have pasted the log after doing trace enable and agent restart. One >confusion : I have not configured xenbr0 and cloud 0 or cloudbr0 . I think >if I am using on same network (mean to say host and management server are >on same subnet), so xenbr0 is required or not ? Although I have not >configured cloud0 but some times it appears on ifconfig and some time it >disappears from ifconfig automatically. Is it a problem ? > >Do I need to configure xenbridge and cloudbridge on host via >/etc/network/interfaces file and is it required ? > >Link for the log: http://apaste.info/kB4Y > >My ifconfig is as follows: > > >root@krishna-S1400RP:/var/log/cloud/agent# ifconfig >cloud0 Link encap:Ethernet HWaddr d2:a3:d7:58:ec:d9 > inet addr:169.254.0.1 Bcast:169.254.255.255 Mask:255.255.0.0 > inet6 addr: fe80::d0a3:d7ff:fe58:ecd9/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:71 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 B) TX bytes:11405 (11.4 KB) > >eth2 Link encap:Ethernet HWaddr 00:1e:67:4d:06:84 > inet addr:10.223.169.166 Bcast:10.223.169.255 >Mask:255.255.255.0 > inet6 addr: fe80::21e:67ff:fe4d:684/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:120393 errors:0 dropped:0 overruns:0 frame:0 > TX packets:54959 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:53992336 (53.9 MB) TX bytes:8380555 (8.3 MB) > Memory:c0900000-c0a00000 > >eth3 Link encap:Ethernet HWaddr 00:1e:67:4d:06:83 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > Memory:c0b00000-c0c00000 > >lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:8818 errors:0 dropped:0 overruns:0 frame:0 > TX packets:8818 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:442416 (442.4 KB) TX bytes:442416 (442.4 KB) > >virbr0 Link encap:Ethernet HWaddr b2:92:ad:9d:e9:2e > inet addr:192.168.122.1 Bcast:192.168.122.255 >Mask:255.255.255.0 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > > > > >On Thu, Jun 6, 2013 at 2:19 PM, Prasanna Santhanam <t...@apache.org> wrote: > >> On Thu, Jun 06, 2013 at 01:58:51PM +0530, Er Krishna wrote: >> > Ahmad >> > >> > You mean to say in same file I should replace info from Trace? And >>what >> > about first line : debug = true is fine or shall I replace debug to >>trace >> > and should do trace=true ? >> >> First line doesn't matter. Just replace the instances of INFO with >> TRACE and share the info post agent restart via a pastebin. >> >> >> -- >> Prasanna., >> >> ------------------------ >> Powered by BigRock.com >> >>