192.168.1.4 is my CS server ip and yes I can ping it. Currently, I have only one machine in my setup and I have assigned this ip to it and I am running MS as well as agent over it. I would like to know how I can run CLOUDSTACK in a single node setup without being connected to any network and gateways.
On Mon, Sep 30, 2013 at 1:40 AM, Rafael Weingartner < rafaelweingart...@gmail.com> wrote: > better, what is the CS server ip address? > > > 2013/9/29 Rafael Weingartner <rafaelweingart...@gmail.com> > > > from the server that CS is running can you ping this address: > 192.168.1.4? > > > > > > 2013/9/29 Karan . <digitalka...@gmail.com> > > > > Hi Marty, > >> > >> Interface already has static ip assigned to it. In fact, this is how > >> cloudstack has configured my /etc/network/interfaces > >> > >> auto lo > >> iface lo inet loopback > >> > >> auto eth0 > >> iface eth0 inet manual > >> > >> auto cloudbr0 > >> iface cloudbr0 inet static > >> bridge_ports eth0 > >> address 192.168.1.4 > >> netmask 255.255.255.0 > >> gateway 192.168.1.1 > >> > >> And this is the output for 'ip link ' > >> > >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode > >> DEFAULT > >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > >> 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast > >> master cloudbr0 state DOWN mode DEFAULT qlen 1000 > >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> 3: cloudbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue > >> state DOWN mode DEFAULT > >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> > >> And 'ip address' > >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > >> inet 127.0.0.1/8 scope host lo > >> inet6 ::1/128 scope host > >> valid_lft forever preferred_lft forever > >> 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast > >> master cloudbr0 state DOWN qlen 1000 > >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> 3: cloudbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue > >> state DOWN > >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> inet 192.168.1.4/24 brd 192.168.1.255 scope global cloudbr0 > >> > >> > >> > >> Regards > >> Karan Pugla > >> > >> > >> On Mon, Sep 30, 2013 at 1:23 AM, Marty Sweet <msweet....@gmail.com> > >> wrote: > >> > >> > Hi Karan, > >> > > >> > Try assigning a static address to the interface then bring it up using > >> > ifup. This should in theory not close down the IP address once link > has > >> > been lost. > >> > > >> > Hope this helps, > >> > Marty > >> > > >> > > >> > On Sun, Sep 29, 2013 at 7:41 PM, Karan . <digitalka...@gmail.com> > >> wrote: > >> > > >> > > Hi > >> > > > >> > > I'll be giving a short demo on CLOUDSTACK in my organization and > for > >> > this > >> > > I have a very basic setup of Cloudstack 4.1.1 where I am using one > >> > laptop > >> > > as management server as well as agent . Also, I am using basic > >> > networking. > >> > > From logs I have observed that whenever my network cable is > >> unplugged, MS > >> > > doesn't start and throws following exception: > >> > > > >> > > 2013-09-29 23:09:09,693 INFO [cloud.cluster.ClusterManagerImpl] > >> > > (Timer-1:null) Start configuring cluster manager : > >> > > ClusterManagerImpl_EnhancerByCloudStack_d07fda90 > >> > > 2013-09-29 23:09:09,753 INFO [cloud.cluster.ClusterManagerImpl] > >> > > (Timer-1:null) Cluster node IP : 192.168.1.4 > >> > > 2013-09-29 23:09:09,756 ERROR [utils.component.ComponentContext] > >> > > (Timer-1:null) Unhandled exception > >> > > javax.naming.ConfigurationException: cluster node IP should be valid > >> > local > >> > > address where the server is running, please check your configuration > >> > > at > >> > > > >> > > > >> > > >> > com.cloud.cluster.ClusterManagerImpl.configure(ClusterManagerImpl.java:1319) > >> > > at > >> > > > >> > > > >> > > >> > com.cloud.utils.component.ComponentContext.initComponentsLifeCycle(ComponentContext.java:111) > >> > > at > >> > > > >> com.cloud.servlet.CloudStartupServlet$1.run(CloudStartupServlet.java:50) > >> > > at java.util.TimerThread.mainLoop(Timer.java:555) > >> > > at java.util.TimerThread.run(Timer.java:505) > >> > > > >> > > Just for starting MS I have to attach my laptop to a network. Please > >> > > suggest me a way where I can start MS without being connected to any > >> > > network since I have a single host setup. I have tried bringing my > >> > > interface up using 'ip link set eth0 up' but eth0 status is always > >> DOWN > >> > > unless I plug it into a network. > >> > > > >> > > > >> > > Regards > >> > > Karan Pugla > >> > > > >> > > >> > > > > > > > > -- > > Rafael Weingartner > > > > > > -- > Rafael Weingartner >
