On May 19, 2014, at 9:49 PM, Samuel Winchenbach <swinc...@gmail.com> wrote:
> Sorry, I forgot I posted this question! > > After using the quick-install guide I went through the regular install > guide and noticed the newer version of the System VM template. I tried the > quick install using the newer template and it worked perfectly. sorry about this, I believe I fixed it in the quick install guide, it should be correct now. > > Sam > > > On Thu, May 15, 2014 at 1:47 PM, Ian Young <iyo...@ratespecial.com> wrote: > >> Two things to check: >> >> That quick start guide used to have the wrong URL for the system VM >> template but it looks like it has been corrected since then. Check your >> command line history and see if the template you downloaded was the same as >> the one in this section: >> >> >> http://cloudstack-installation.readthedocs.org/en/latest/qig.html#system-template-setup >> >> For NFSv4 you need to export a pseudo file system designated by fsid=0, >> which this guide doesn't mention. See section "18.7.1.1. Using exportfs >> with NFSv4" in the following article for more information: >> >> >> http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-nfs-server-config-exports.html >> >> >> >> On Tue, May 6, 2014 at 5:33 AM, dimas <smid...@gmail.com> wrote: >> >>> Samuel Winchenbach <swinchen@...> writes: >>> >>>> >>>> Hi all, >>>> >>>> I am following the quick installation guide exactly (I even setup a >>> gateway >>>> w/ IP 172.16.10.1) but I can not get the setup to complete. The System >>> VMs >>>> remain stuck on "Starting". >>>> Any help would be greatly appreciated! >>>> >>>> Now I logged into the management console and used the exact settings as >>>> listed in the "Quick Install Guide". It seems to hang forever (>2 >>> hours) >>>> on "Creating system VMs (this may take a while)" >>>> >>> >>> >>> Hi I encountered same problem like you. did you managed to find a >> solution? >>> looking forward for your answer >>> >>> >>> >>> >>
