Hi Rafael, Can I confirm it's this one?
# For debugging purposes, log each DNS query as it passes through # dnsmasq. #log-queries Looking forward to your reply, thank you. Cheers. On Mon, Jul 21, 2014 at 1:59 AM, Rafael Weingartner < rafaelweingart...@gmail.com> wrote: > 4. May I know how to enable the dnsmasq debug? Any documentation / steps on > how to do it? I believe I have to do it on the VR itself? > Sure you have to do that on VR itself. > You should edit the file /etc/dnsmasq.conf > > Now I am not able to access my VR to see which property you should enable. > But, if you log into the VR and open the /etc/dnsmasq.conf, you should be > able to see a debug option commented. > > You just need to uncomment it and restart the service. > > > On Sun, Jul 20, 2014 at 2:48 PM, Indra Pramana <in...@sg.or.id> wrote: > > > Hi Santhosh, > > > > Good day to you, and thank you for your email. > > > > Traceroute packets seems to be dropped, I think it's by default. See > result > > below: > > > > # traceroute X.X.X.2 > > traceroute to X.X.X.2 (X.X.X.2), 30 hops max, 60 byte packets > > 1 * * * > > 2 * * * > > 3 * * * > > > > However, I am able to ping, and there is a response when I tried to > telnet > > to port 53. > > > > 64 bytes from X.X.X.2: icmp_req=4 ttl=64 time=2.00 ms > > 64 bytes from X.X.X.2: icmp_req=5 ttl=64 time=0.291 ms > > 64 bytes from X.X.X.2: icmp_req=6 ttl=64 time=0.384 ms > > ^C > > --- X.X.X.2 ping statistics --- > > 6 packets transmitted, 6 received, 0% packet loss, time 4999ms > > rtt min/avg/max/mdev = 0.270/0.603/2.006/0.628 ms > > > > # telnet X.X.X.2 53 > > Trying X.X.X.2... > > Connected to X.X.X.2. > > Escape character is '^]'. > > > > netstat -a on the VR shows the service is listening on domain port (53). > > > > tcp 0 0 r-2606-VM:domain *:* > LISTEN > > > > tcp 0 0 X.X.X.2:domain *:* LISTEN > > > > udp 156992 0 r-2606-VM:domain *:* > > > > udp 164032 0 X.X.X.2:domain *:* > > > > Can you advise if there's anything else I need to check? > > > > Looking forward to your reply, thank you. > > > > Cheers. > > > > > > > > > > On Mon, Jul 21, 2014 at 1:17 AM, Santhosh Edukulla < > > santhosh.eduku...@citrix.com> wrote: > > > > > Run trace route from guest vms, the result will yield to the point > where > > > packet drop is happening, could be a network acl rule issue, but > tracert > > > command can lead to some answers. > > > > > > List running ports as well on VR, do a telnet to dns port on router > from > > > guest vm to verify for its response. > > > > > > Santhosh > > > ________________________________________ > > > From: Indra Pramana [in...@sg.or.id] > > > Sent: Sunday, July 20, 2014 1:06 PM > > > To: users@cloudstack.apache.org > > > Cc: d...@cloudstack.apache.org > > > Subject: Re: DNS service on VR not responding > > > > > > Hi Rafael, > > > > > > Good day to you, and thank you for your reply. > > > > > > Can't find anything wrong on dnsmasq.log / daemon.log, just some log > > > entries related to DHCP, nothing on DNS. I masked the IP addresses > since > > > they are public. > > > > > > === > > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPDISCOVER(eth0) X.X.X.X > > > 06:62:a8:01:13:37 > > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPOFFER(eth0) X.X.X.X > > > 06:62:a8:01:13:37 > > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPREQUEST(eth0) X.X.X.X > > > 06:62:a8:01:13:37 > > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPACK(eth0) X.X.X.X > > > 06:62:a8:01:13:37 yyyyyy > > > Jul 20 16:23:53 r-2606-VM dnsmasq[3519]: DHCPINFORM(eth0) X.X.X.X > > > 06:43:4a:01:12:65 > > > Jul 20 16:23:53 r-2606-VM dnsmasq[3519]: DHCPACK(eth0) X.X.X.X > > > 06:43:4a:01:12:65 zzzzzz > > > === > > > > > > Yes, the guest VMs are having difficulties resolving domains into IP > > > addresses because of the problem on the VR's DNS server. > > > > > > $ host www.google.com X.X.X.X (where X.X.X.X is the IP address of the > > VR) > > > ;; connection timed out; no servers could be reached > > > > > > However, from within the VR, I am able to resolve domains just fine. > > > > > > Any advise where can I start troubleshooting this? > > > > > > Looking forward to your reply, thank you. > > > > > > Cheers. > > > > > > > > > > > > On Sun, Jul 20, 2014 at 11:26 PM, Rafael Weingartner < > > > rafaelweingart...@gmail.com> wrote: > > > > > > > Have you taken a look at dnsmasq.log in the VR ? > > > > What do you mean with not responding? The addresses are not being > > > resolved > > > > to ip addresses? > > > > > > > > > > > > On Sun, Jul 20, 2014 at 11:53 AM, Indra Pramana <in...@sg.or.id> > > wrote: > > > > > > > > > Dear all, > > > > > > > > > > All our guest VMs are having our virtual router (VR)'s IP address > on > > > > > /etc/resolv.conf. In the past two weeks, I just realised that the > DNS > > > > > service on the VR is not working, and doesn't respond to DNS > queries > > > from > > > > > the DNS clients on the guest VM. > > > > > > > > > > I have tried to stop and start back the VR, but the problem > persists. > > > > > > > > > > DHCP services seems to be running fine, only DNS services are not > > > > working. > > > > > From what I understand, both services are provided by dnsmasq, > > correct? > > > > > > > > > > Any advice on how can I resolve the problem? > > > > > > > > > > Looking forward to your reply, thank you. > > > > > > > > > > Cheers. > > > > > > > > > > > > > > > > > > > > > -- > > > > Rafael Weingärtner > > > > > > > > > > > > > -- > Rafael Weingärtner >
