Hi Rajashekar, >>>>> i'm unable to test the network bandwidth rate. Can you please explain what is the issue you are facing while testing. Is it not working as the value configured ?
Network throttling is for egress traffic. In configuration it is Mbits/s but in hypervisor it is configured as MBytes/s. 1024 Mb/s is 128MB. Thanks, Jayapal On 10-Dec-2014, at 2:15 PM, Andrija Panic <andrija.pa...@gmail.com> wrote: > I also examinded KVM thortling, and got 1/4 of the settings.... cloudstack > always starts VM with same parameters, no matter what you configure > manually on KVM/Xen.. > > On 10 December 2014 at 08:27, raja sekhar <rajsekhar....@gmail.com> wrote: > >> hi prasanth, >> >> In cloudstack i have given network rate as 1024Mb/s but in xencenter qos >> properties it is showing 25Mb/s for that VM. >> >> Andrija Panic/Prashant if i change the interface property(bandwidth) >> through xencenter or commandline process in >> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html >> , >> if i shutdown the VM from cloudstack that VM wil be disabled from >> xencenter, when ever i start the VM, the qos value will be same or it will >> changed to 25Mb/s. >> >> waiting for your reply. >> >> Regards, >> Rajasekhar. >> >> >> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra < >> prashantkumar.mis...@citrix.com> wrote: >>> >>> From the xencenter you can check interface property (look for QoS >>> settings) for that particular vm . >>> >>> -----Original Message----- >>> From: Andrija Panic [mailto:andrija.pa...@gmail.com] >>> Sent: Tuesday, December 09, 2014 1:30 PM >>> To: d...@cloudstack.apache.org >>> Cc: users@cloudstack.apache.org >>> Subject: Re: 答复: unable to test Network Throttling. >>> >>> Recent reply from Vadim: >>> >> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html >>> >>> On 9 December 2014 at 08:40, raja sekhar <rajsekhar....@gmail.com> >> wrote: >>> >>>> Hi Star, >>>> >>>> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1. >>>> how can i check the band width rate of the VM, is there any command >>>> for xenserver host? >>>> >>>> waiting for your reply. >>>> >>>> Regards, >>>> Rajasekhar. >>>> >>>> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote: >>>>> >>>>> Hi, >>>>> >>>>> There is a priority: the network rate of compute offering > the >>>>> network rate of global configuration. >>>>> If you deploy on kvm host, you can use virsh command to dumpxml of >>>>> the VM and focus on <interface> ... </interface>. >>>>> >>>>> Best Regards, >>>>> Star Guo >>>>> >>>>> -----邮件原件----- >>>>> 发件人: raja sekhar [mailto:rajsekhar....@gmail.com] >>>>> 发送时间: 2014年12月9日 14:28 >>>>> 收件人: d...@cloudstack.apache.org; users@cloudstack.apache.org >>>>> 主题: unable to test Network Throttling. >>>>> >>>>> Hi all, >>>>> >>>>> i have created one compute offering(2 CPU , 4 GB) and given the >>>>> Network Rate as 1024 Mb/s, a VM is deployed from that compute >>>>> offering and in global settings i didn't changed any Network >>>>> Throttling Rate(default 200 >>>>> Mb/s) and i'm unable to test the network bandwidth rate. >>>>> >>>>> please suggest me how to test the bandwidth rate of the VM. >>>>> >>>>> >>>>> >>>>> Regards, >>>>> Rajasekhar. >>>>> >>>>> >>>> >>> >>> >>> >>> -- >>> >>> Andrija Panić >>> >> > > > > -- > > Andrija Panić
