Hi Jeremy, Did you already solve your problem?
Not sure if it is possible to use the IPSec tunnels from remote VPN. Firewall might be too strict, but haven't looked yet. Regards, Remi Sent from my iPhone > On 29 Aug 2015, at 17:00, Jeremy Peterson <jpeter...@acentek.net> wrote: > > I am not sure if this was asked or answered but googling has led me no where. > > > I am running cloudstack 4.5.0, XenServer 6.5, Advanced networking w/ VLAN > segmentation. > > > I have a VPC setup which i am using a IPSec tunnel back to a zywall firewall > and a monowall firewall. > > > Monowall Cloustack VPC zywall > > 192.168.1.0/24 192.168.2.0/24 192.168.71.0/24 > > > Tunnels are setup in vpc for both locations and servers in cloudstack can > connect to the world and connect to the monowall and zywall networks. > > > Everything is fine with that but when I have a remote user that needs to VPN > into the cloudstack VPC is where i am thrown into a whirlwind of questions. > > > I setup a VPN connection on the VR for the VPC. > > I setup username/password. > > > The user sets up the connection on his Mac OSX and using split tunnel can > connect to the VPN. > > > My VPN network is 10.1.2.0/24 > > > He receives a 10.1.2.3 ip address. > > > He is unable to ping the IPSec Tunnel gateways 192.168.1.1 and 192.168.71.1. > > > He can get to the world as his default gateway is his router. > > > I switched to push all traffic over the VPN to remove the split tunnel. > > > He is able to ping the 10.1.2.1 gateway on the VR > > > He is able to ping his gateway the VPC router 10.1.2.1. > > > He is able to ping the VPC network's gateway 192.168.2.1 > > He is unable to get to the world. I try to ping google dns 8.8.8.8 and it > doesnt' get past the VR 10.1.2.1 in traceroutes. > > I am looking for help on this as i'm confused. If I change him back to a > split tunnel as that would be prefered why is the tunnel not annoucing all > networks know to the VR. > > I was able to recreate this issue on windows 8.1. > > ?Jeremy
