Hi Marcus,
I don't have any support becuase is did this installation on dedicated
servers, they don't provide support for cloudstack.
Regards,
Cristian
-----Original Message-----
From: Marc-Andre Jutras [mailto:[email protected]]
Sent: Tuesday, June 7, 2016 4:36 PM
To: [email protected]
Subject: Re: FW: Password reset, not work after adding new Guest IP Class
yes I did...
So something is wrong on your setup, Still trying to figure it out what is
wrong...
Do you have any support from you service provider ? if so, try to check with
them if there's anything they can do...
Marcus
On 2016-06-05 1:28 PM, Cristian Ciobanu wrote:
> Hi Marcus,
>
> Did you recevied my last reply to this email ?
>
> Thank you.
>
> Regards,
> Cristian
>
> -----Original Message-----
> From: Marc-Andre Jutras [mailto:[email protected]]
> Sent: Thursday, June 2, 2016 12:06 AM
> To: [email protected]
> Subject: Re: FW: Password reset, not work after adding new Guest IP
> Class
>
> Thanks for the logs Cristian,
>
> You just forgot to include the : /var/log/cloud.log available on the
> VR... ;)
>
> Also, quite Interesting to see that your VM can communicate with ACS
> correctly...
>
> Can you try to reproduce it again but this time with the default VM (
> ie: CentOS 5.6... ) Just want to see if it's going to behave the same
> way with the default template... if it work, that will means something
> is wrong with your VM template or something is wrong in your
> cloud-init configuration
>
>
> Marcus
>
>
>
> On 2016-06-01 4:43 PM, Cristian Ciobanu wrote:
>> Hi Marcus,
>>
>> I just reproduced this error, by removing an old VM (with and IP
>> from previous class ) also exported the last part from log :
>>
>> VR LOG : hxxp://pastebin.com/TH8CcEL6
>>
>>
>> Very interesting is what I saw on VM :
>>
>> VM LOG : hxxp://pastebin.com/dn6Du4ci ( in order to grab this
>> part of the log I was able to login with default VM password which
>> was set before when I created this template )
>>
>> Thank you !
>>
>> Regards,
>> Cristian
>>
>> -----Original Message-----
>> From: Marc-Andre Jutras [mailto:[email protected]]
>> Sent: Wednesday, June 1, 2016 8:00 PM
>> To: [email protected]
>> Subject: Re: FW: Password reset, not work after adding new Guest IP
>> Class
>>
>> when your condition happen, is there any errors in the /var/log/cloud.log of
>> your VR ?
>>
>> Marcus
>>
>>
>> On 2016-06-01 12:21 PM, Cristian Ciobanu wrote:
>>> Hi Marcus,
>>>
>>>
>>> Ok, please see, i also attached screenshots.
>>>
>>> 1. Yes, i'm using CloudStack 4.5.2 with Vmware 5.5 update3
>>> 2. vCenter version : hxxp://imgur.com/tcjY4kS
>>> 3. Host version : hxxp://imgur.com/ZIDKqWe
>>> 4. 2X NIC/hypervisor : hxxp://imgur.com/UefelGO
>>> 5.How many vm per hosts: 5-7 : hxxp://imgur.com/ZIDKqWe
>>> 6. How many vswitch port ? : 120 (looks like i forgot to change
>>> ) : hxxp://imgur.com/m3CPdSb
>>> 7. Networking setup : hxxp://imgur.com/UefelGO
>>> 8. I use only vswitch: hxxp://imgur.com/LJTx2gD
>>> 9. VR version : 4.5.2
>>> 10. Can you try to delete / expunge the VR and let the system
>>> re-create it ? : like i said before i do reboot or delete, when a new vm
>>> are deployd from another class ( from X to Y to Z, etc and viceversa )
>>> 11. On your VM : can you check which cloud-init version you're
>>> running ? ( could it be related ? : i'm not sure if this can be related, i
>>> have about 7 OS Templates, Windows, Linux and i have the same issue for all.
>>> For Windows i use : cloudbaseinit 0.9
>>> For Linux i use
>>> hxxps://github.com/HeinleinSupport/acs-template-scripts i also use
>>> hxxp://cloudstack-administration.readthedocs.io/en/4.8/templates.htm
>>> l
>>> #
>>> linux-os-installation for centos 6.7
>>>
>>> Thank you !!
>>>
>>> Regards,
>>> Cristian
>>>
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Marc-Andre Jutras [mailto:[email protected]]
>>> Sent: Wednesday, June 1, 2016 5:07 PM
>>> To: [email protected]
>>> Subject: Re: FW: Password reset, not work after adding new Guest IP
>>> Class
>>>
>>> Hey !
>>>
>>> Ok, At this point, I will need a bit more info then... so far, looks like
>>> the public core router can see correctly both public ip range and route
>>> them correctly...
>>>
>>> You mention that you're using Cloustack 4.5.2 wuth Vmware 5.5
>>> - vmware : which latest fix / patch level installed ?
>>> - approx : how many vm per hosts are you running
>>> - how many NIC per hypervsor ? ( bonding ? )
>>> - how many vswitch port ? (
>>> http://docs.cloudstack.apache.org/projects/cloudstack-installation/e
>>> n / 4.6/hypervisor/vsphere.html#increasing-ports
>>> )
>>> - can you send me a screenshot of your vsphere client //
>>> networking setup ? (
>>> http://docs.cloudstack.apache.org/projects/cloudstack-installation/e
>>> n / 4.6/hypervisor/vsphere.html#physical-host-networking
>>> )
>>> - are you using any dvswitch or only vswitch ? if dvswitch, in ACS /
>>> Global settings : vmware.use.dvswitch is enable ?
>>> - on cloudstack : global settings / host : this IP is reachable
>>> internally ( RFC1918 - 10.x.x.x, 172.16.x.x, 192.168.x.x ) or externally (
>>> public ip )
>>> - - if public IP, any firewall or load balancer that could restraint
>>> or limit the access ??
>>> - can you provide a quick networking layout on how you setup your
>>> network ? ( example: hxxp://imgur.com/wZdjoqN )
>>> - VR version : log on the VR and do : cat /etc/cloudstack-release (
>>> it shoud report 4.5 )
>>> - VR version: latest VR in place ? (
>>> http://cloudstack.apt-get.eu/systemvm/4.5/ )
>>> - Can you try to delete / expunge the VR and let the system re-create it ?
>>> - on your VM : can you check which cloud-init version you're running ? (
>>> could it be related ? :
>>> https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1440263 )
>>>
>>> Marcus
>>>
>>> On 2016-05-31 4:21 PM, Cristian Ciobanu wrote:
>>>> Hi Marcus,
>>>>
>>>> I the all requested tests, successfully, please see in provided
>>>> images.
>>>>
>>>> IP to GW: hxxp://imgur.com/a/ON99N ( i also did ping on
>>>> other GW not allocated on ACS)
>>>>
>>>> IP to IP: hxxp://imgur.com/a/uPlFr ( IP to Linux VM's
>>>> from ACS environment )
>>>>
>>>> IP to DNS : hxxp://imgur.com/a/oWrAj
>>>>
>>>>
>>>> Thanks for support!
>>>>
>>>>
>>>> Regards,
>>>> Cristian
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Marc-Andre Jutras [mailto:[email protected]]
>>>> Sent: Tuesday, May 31, 2016 6:19 PM
>>>> To: [email protected]
>>>> Subject: Re: FW: Password reset, not work after adding new Guest IP
>>>> Class
>>>>
>>>> Hey Cristian
>>>>
>>>> Can you go on the VR and try to run a ping from there ?
>>>>
>>>> procedure on VR:
>>>>
>>>> 1- update the ping util ( apt-get install iputils-ping )
>>>>
>>>> 2- run a ping test with different source IP ( ping -I sourceIP DestIP
>>>> ctrl-c to stop the ping )
>>>>
>>>> - source IP : use the IP configured on the VR
>>>>
>>>> - destination IP : try to ping the gateway, an IP on the other
>>>> range that should be reachable and not configured on the VR and another
>>>> public IP...
>>>>
>>>> a-1) ping -I 159.X.X.X 167.X.X.X-GW
>>>>
>>>> a-2) ping -I 159.X.X.X 167.X.X.X-IP
>>>>
>>>> a-3) ping -I 159.X.X.X 8.8.8.8
>>>>
>>>> b-1) ping -I 167.X.X.X 159.X.X.X-GW
>>>>
>>>> b-2) ping -I 167.X.X.X 159.X.X.X-IP
>>>>
>>>> b-3) ping -I 167.X.X.X 8.8.8.8
>>>>
>>>> post me the result...
>>>>
>>>> 3- re-load the original ping util... ( apt-get install
>>>> inetutils-ping
>>>> - or destroy / re-create your VR... )
>>>>
>>>> Normally, your core router should know about these two IP ranges, if so,
>>>> you can just force the core router to route one IP range to the other
>>>> range and set only one default gateway in Cloudstack/public ip range...
>>>>
>>>> Marcus
>>>>
>>>>
>>>>
>>>> On 2016-05-31 3:17 AM, Cristian Ciobanu wrote:
>>>>> Hi Marcus,
>>>>>
>>>>> First of all, thanks for answer.
>>>>>
>>>>> - I don't have access to border router ( i will try to get access
>>>>> )
>>>>> - Yes, each IP range have their gateway
>>>>> - I'm not sure why is working after VR reboot/ each
>>>>> reboot, looks lie is doing a switch from , i also provided a
>>>>> screenshot where i run a ping test from IP X to Gateway Y
>>>>>
>>>>> Please see: http://i.imgur.com/T0w3fdZ.jpg
>>>>>
>>>>>
>>>>> Regards,
>>>>> Cristian
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Marc-Andre Jutras [mailto:[email protected]]
>>>>> Sent: Monday, May 30, 2016 9:46 PM
>>>>> To: [email protected]
>>>>> Subject: Re: FW: Password reset, not work after adding new Guest
>>>>> IP Class
>>>>>
>>>>> Hi Cristian,
>>>>>
>>>>> Sound like a networking issue // gateway mismatch on your side and not an
>>>>> issue with ACS: TCP packet seems to be blocked on the border router...
>>>>> ie: ip on 159.X.X.X network is trying to reach your ACS server via the
>>>>> 167.X.X.X gateway or vice-versa; VR is not managing two different default
>>>>> gateway !
>>>>>
>>>>> Do you have some control or can modify config on your border router ? (
>>>>> where both ip range got their gateway ? ) if so, check there to allow
>>>>> source IP : 159.X to be able to reach GW : 167 or vice-versa...
>>>>>
>>>>> Marcus
>>>>>
>>>>> On 2016-05-19 4:29 AM, Cristian Ciobanu wrote:
>>>>>> Hello All,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I will insist on this topic because i don’t recevied any answer, i just
>>>>>> want to know if is possibile to fix this issue.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Thank you !
>>>>>>
>>>>>> Cristian
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: Cristian Ciobanu [mailto:[email protected]]
>>>>>> Sent: Monday, May 16, 2016 10:35 AM
>>>>>> To: [email protected]
>>>>>> Subject: RE: Password reset, not work after adding new Guest IP
>>>>>> Class
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>>
>>>>>>
>>>>>> This issue persist, each time i have to reboot the VR.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Example.
>>>>>>
>>>>>>
>>>>>>
>>>>>> IP class - X
>>>>>>
>>>>>> IP class – Y
>>>>>>
>>>>>>
>>>>>>
>>>>>> 1. Build VM from IP class X, password reset on deploy works
>>>>>>
>>>>>> 2. Build VM from IP class X, password reset on deploy works
>>>>>>
>>>>>> 3. Build VM from IP class X, password reset on deploy works
>>>>>>
>>>>>> 4. Build VM from IP class Y, not working
>>>>>>
>>>>>> 5. Reboot VR
>>>>>>
>>>>>> 6. Build VM from IP class Y, password reset on deploy works
>>>>>>
>>>>>> 7. Build VM from IP class Y, password reset on deploy works
>>>>>>
>>>>>> 8. Remove a VM from IP class X
>>>>>>
>>>>>> 9. Build VM from IP class X, not working
>>>>>>
>>>>>> 10. Each time is switch from Y to X and vice versa i need to reboot VR
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have this issue with any OS, also i have 2
>>>>>> Enviorments with ACS 4.5.2 Vmware 5.5
>>>>>>
>>>>>>
>>>>>>
>>>>>> Can i get some help ?
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: Cristian Ciobanu [mailto:[email protected]]
>>>>>> Sent: Saturday, March 26, 2016 3:06 PM
>>>>>> To: [email protected]
>>>>>> <mailto:[email protected]>
>>>>>> Subject: Re: Password reset, not work after adding new Guest IP
>>>>>> Class
>>>>>>
>>>>>>
>>>>>>
>>>>>> Can someone help me regarding my issue ? for sure this is a CS bug,
>>>>>> but i need to know if this can be solved on 4.5.2
>>>>>>
>>>>>>
>>>>>>
>>>>>> Thank you all
>>>>>>
>>>>>> Cristian
>>>>>>
>>>>>> On 25.03.2016 21:41:06, Cristian Ciobanu <[email protected]
>>>>>> <mailto:[email protected]> > wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Yes, i have basic zone configured on my ACS environment,
>>>>>> also i was able to see two networks on VR only after i did rebuild for
>>>>>> the router.
>>>>>>
>>>>>>
>>>>>>
>>>>>> 1 x IP class 158.X /28
>>>>>>
>>>>>> 2 x IP class 167.X /28
>>>>>>
>>>>>>
>>>>>>
>>>>>> 1. Rebuild router
>>>>>>
>>>>>> 2. Removed VM's in order to retest a deploy on first
>>>>>> (158.X)IP Class
>>>>>>
>>>>>> 3. Deploy VM, everything works, also after this deploy
>>>>>> i don't have available IP's from this class (158.X)
>>>>>>
>>>>>> 4. Deploy VM on secondary IP class (167.X) , password not
>>>>>> working, i was able to login on VM only with static password.
>>>>>>
>>>>>> 5. Removed VM from class(158.X)
>>>>>>
>>>>>> 6 Deploy VM on (158.X) Not working again
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Please see the screenshots, i don't provided screenshot from
>>>>>> VM when generated password works :
>>>>>>
>>>>>>
>>>>>>
>>>>>> Zone/Guest : http://i.imgur.com/h2npDcP.jpg
>>>>>>
>>>>>> VR: http://i.imgur.com/TsCTRu6.jpg and
>>>>>> http://i.imgur.com/TsCTRu6.jpg
>>>>>>
>>>>>> Pods: http://i.imgur.com/y0Oqgk9.jpg
>>>>>>
>>>>>> VR ip a : http://i.imgur.com/7MBzggM.jpg
>>>>>>
>>>>>> VM (test linux ) : http://i.imgur.com/uWtTIpI.jpg
>>>>>>
>>>>>> VM (test Windows) :http://i.imgur.com/T0w3fdZ.jpg
>>>>>>
>>>>>>
>>>>>>
>>>>>> Thank you !
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Cristian
>>>>>>
>>>>>> On 25.03.2016 19:49:57, Stephan Seitz
>>>>>> <[email protected]
>>>>>> <mailto:[email protected]> > wrote:
>>>>>>
>>>>>> Hi!
>>>>>>
>>>>>> Did you add two networks with dhcp? what shows your guests
>>>>>> routing table? obviously two default gateways? did you check if
>>>>>> your virtual router is reachable from within the guest?
>>>>>>
>>>>>> Am Freitag, den 25.03.2016, 15:18 +0200 schrieb Cristian Ciobanu:
>>>>>>> Hello,
>>>>>>>
>>>>>>> Looks like after adding a second IP class for Guest, password
>>>>>>> generator is not working for New VM on first deploy and password
>>>>>>> reset.
>>>>>>>
>>>>>>> Password is provided on CloudStack but when i try to login on
>>>>>>> new VM is not working.
>>>>>>>
>>>>>>> I just added a another /28 for the moment i have 2 x /28 on this
>>>>>>> zone running on ACS 4.5.2 with VMware 5.5.
>>>>>>>
>>>>>>>
>>>>>>> Any info/help ?
>>>>>>>
>>>>>>>
>>>>>>> Thank you !
>>>>>>>
>>>>>>> Regards,
>>>>>>> Cristian
>
