if you think is SG, you can set allow all in the SG assigned to VM On Tue, Feb 23, 2021 at 10:15 PM Fariborz Navidan <mdvlinqu...@gmail.com> wrote:
> Also, other system VMs are able to connect to port 8080 of VR but not guest > VMs. I guess this is an issue with security groups. > > On Tue, Feb 23, 2021 at 5:28 PM Fariborz Navidan <mdvlinqu...@gmail.com> > wrote: > > > Hello, > > > > I can connect to port 8080 of VR from the KVM host but not from VMs. I > > think this is somehow blocked on the host or network. I checked the VR > and > > it is listening on port 8080 separately on last IP of each guest IP > range. > > It seems the connection is blocked somewhere on the network or by > security > > groups. > > > > TIA > > > > On Fri, Feb 19, 2021 at 3:59 PM Alireza Eskandari < > astro.alir...@gmail.com> > > wrote: > > > >> Investigate the problem within VR. > >> Login to VR with SSH from the CS management server and check the > services > >> and listening ports. > >> You can also see logs there. > >> Use tcpdump inside VR to capture packets and see if a request for a > >> password is coming to VR or not. > >> > >> On Wed, Feb 17, 2021 at 9:41 PM Fariborz Navidan <mdvlinqu...@gmail.com > > > >> wrote: > >> > >> > Hi, > >> > > >> > Thanks for the reply. I can ping the VR from VM but curl and wget fail > >> to > >> > connect to VR on port 8080. The connection times out. It seems the VR > >> does > >> > listen to port 8080. > >> > > >> > Regards > >> > > >> > On Wed, Feb 17, 2021 at 8:12 PM Andrija Panic < > andrija.pa...@gmail.com> > >> > wrote: > >> > > >> > > Please use your networking knowledge to see if the VM has a > >> connection to > >> > > VR (ICMP), to IP of VR, to port 8080. > >> > > > >> > > On Tue, 16 Feb 2021 at 21:40, Fariborz Navidan < > mdvlinqu...@gmail.com > >> > > >> > > wrote: > >> > > > >> > > > Hello, > >> > > > > >> > > > When I request password reset at the next time the VM starts, it > >> cannot > >> > > > connect to the virtual router on port 8080. The connection times > out > >> > with > >> > > > no response. I am using ACS 4.15 and VR version 4.15 > >> > > > > >> > > > Please advise. > >> > > > > >> > > > TIA. > >> > > > > >> > > > >> > > > >> > > -- > >> > > > >> > > Andrija Panić > >> > > > >> > > >> > > > -- Regards, Hean Seng