GitHub user mpbraj closed the discussion with a comment: Setup Cloudstack HCI
Ok... Is it possible to give a step by step config from scratch for the attached architecture....creating of zone, vlans, public netwok, Guest network and its IP and the external switch Vlans configuration, you can point to some url where I can refer...many of the sites I checked there is no such doc....since I am building it for the first time, there are so many things to consider including that I have been asked to migrate from vmware to some opensource platform...More or less I have understood, I might need one step by step config with one host, I will be able to take it forward... [image: image.png] On Wed, Jul 24, 2024 at 9:29 AM Rohit Yadav ***@***.***> wrote: > > 3. Directly between hosts, link network is enough you don’t need a > switch or router for such a network. But not recommended in production. > 4. IP on VMs are based on the public network which is implemented with > the 1G network. > > — > Reply to this email directly, view it on GitHub > <https://github.com/apache/cloudstack/discussions/9363#discussioncomment-10133002>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/BJYWPXTC6VQZTCPYN2NHP3TZN4RBLAVCNFSM6AAAAABKUQAXNSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMJTGMYDAMQ> > . > You are receiving this because you modified the open/close state.Message > ID: ***@***.***> > GitHub link: https://github.com/apache/cloudstack/discussions/9363#discussioncomment-10137257 ---- This is an automatically sent email for [email protected]. To unsubscribe, please send an email to: [email protected]
