> On 25 Jul 2015, at 2:38 am, Danilo Malcangio <d.malcan...@eletech.it> wrote: > > Hello everyone, > I have a cluster with the following configuration > > > node 1: pc-1 > node 2: pc-2 > > primitive asterisk asterisk \ > params user=root group=root maxfiles=65536 > monitor_sipuri="sip:10.2.31.240" > primitive pingGW PingOnFailOver > primitive tftp lsb:tftpd-hpa \ > op monitor interval=30s \ > op start interval=0 timeout=120s \ > op stop interval=0 timeout=120s > primitive virtual-ip IPaddr2 \ > params ip=10.2.31.240 cidr_netmask=20 > colocation et-cluster-dependency inf: virtual-ip asterisk pingGW tftp > order et-cluster-order inf: virtual-ip asterisk pingGW tftp > > > I have installed sipsak to use the ocf:heartbeat:asterisk RA > Asterisk has a binding on the virtual ip (bindnetaddr) > Resource asterisk doesn't start and I get the following errors with crm_mon > > > Online: [ pc-1 pc-2 ] > > virtual-ip (ocf::heartbeat:IPaddr2): Started pc-2 > > Failed actions: > asterisk_start_0 on pc-1 'unknown error' (1): call=20, status=complete, > last-rc-change='Fri Jul 24 18:0 > 9:05 2015', queued=0ms, exec=2131ms > asterisk_start_0 on pc-2 'unknown error' (1): call=25, status=complete, > last-rc-change='Fri Jul 24 18:0 > 9:21 2015', queued=0ms, exec=2123ms > > > I tried to debug the RA as described here > http://clusterlabs.org/wiki/Debugging_Resource_Failures, configured the > cluster only with the virtual ip (10.2.31.240) > > root@pc-1:~# echo $OCF_ROOT > /usr/lib/ocf > root@pc-1:~# export OCF_RESKEY_user=root > root@pc-1:~# export OCF_RESKEY_group=root > root@pc-1:~# export OCF_RESKEY_maxfiles=65536 > root@pc-1:~# export OCF_RESKEY_monitor_sipuri=sip:10.2.31.240 > > > > root@pc-1:~# /usr/lib/ocf/resource.d/heartbeat/asterisk start ; echo $? > ERROR: /usr/lib/ocf/resource.d/heartbeat/asterisk: 1: kill: No such process > INFO: Asterisk PBX not running: removing old PID file > ERROR: Unable to connect to remote asterisk (does > /var/run/asterisk/asterisk.ctl exist?) > INFO: Asterisk PBX not running yet > INFO: 0 active channels 0 active calls 0 calls processed > ERROR: command failed: sipsak -s sip:10.2.31.240 > ERROR: Asterisk PBX start failed > 1 > > root@pc-1:~# /usr/lib/ocf/resource.d/heartbeat/asterisk start ; echo $? > INFO: Asterisk PBX already running > 0 > > > Running the script from shell I get those errors the first time, but asterisk > starts, infact if I run the script again it results online. > It happened that twice the resource started correctly with the others, but > after a failover the resource didn't start on the other node. > > What am I missing?
Unless you think the agent is running the wrong command, the asterisk logs is where I would be looking next. > > Thanks > > > P.s. > > My conf is > Debian Jessie 8.1 > Pacemaker 1.1.12 > Corosync 2.3.4 > crmsh 2.1.0 > asterisk 13.4.0 > > > _______________________________________________ > Users mailing list: Users@clusterlabs.org > http://clusterlabs.org/mailman/listinfo/users > > Project Home: http://www.clusterlabs.org > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf > Bugs: http://bugs.clusterlabs.org _______________________________________________ Users mailing list: Users@clusterlabs.org http://clusterlabs.org/mailman/listinfo/users Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org
