On 11/16/2015 06:08 AM, Shilu wrote: > The following configuration is mine.it work well when I didn't add the fence > configureation. > But when I add the configureation primitive st-ipmilan1 stonith:ipmilan, it > report the following error. > I want to know how to configure it and how to confirm that it will work well. > > Failed actions: > st-ipmilan1_monitor_0 (node=ubuntu212, call=-1, rc=1, status=Timed Out, > last > -rc-change=Mon Nov 16 06:47:19 2015 > , queued=0ms, exec=0ms > ): unknown error >
Check the logs for any fence_ipmilan messages around this time. You can also try to run the command manually (and maybe add "-v" for verbose messages): fence_ipmilan -A md5 -a 192.168.33.127 -p 12345678 -l admin -o monitor -L admin I don't think there's a "hostname" option for fence_ipmilan. I think you mean "pcmk_host_list=ubuntu211", because without that, Pacemaker will try to use st-ipmilan1 when fencing *either* node. (Of course, once this is working, you'll want to set up a st-ipmilan2 similarly.) I think "priv" should be "privlvl". If these are on-board IPMI controllers, which share their power supply with the host computer, then fencing will fail if the power fails, and the cluster will refuse to run any services. If that's undesirable, you may want to consider a second fencing level using intelligent power switches or some other alternative fencing method. > node $id="3232244179" ubuntu211 > node $id="3232244180" ubuntu212 > primitive VIP ocf:heartbeat:IPaddr \ > params ip="192.168.33.129" \ > op monitor timeout="10s" interval="1s" > primitive lunit ocf:heartbeat:iSCSILogicalUnit \ > params implementation="tgt" target_iqn="hoo" lun="1" path="rbd/hoo" > tgt > _bstype="rbd" \ > op monitor timeout="10s" interval="1s" > primitive st-ipmilan1 stonith:ipmilan \ > params hostname="ubuntu211" ipaddr="192.168.33.127" port="623" > auth="md > 5" priv="admin" login="admin" password="12345678" > primitive tgt ocf:heartbeat:iSCSITarget \ > params implementation="tgt" iqn="hoo" tid="5" \ > op monitor interval="1s" timeout="10s" > group cluster VIP tgt lunit > property $id="cib-bootstrap-options" \ > dc-version="1.1.10-42f2063" \ > cluster-infrastructure="corosync" \ > stonith-enabled="true" \ > no-quorum-policy="ignore" > ------------------------------------------------------------------------------------------------------------------------------------- _______________________________________________ Users mailing list: [email protected] http://clusterlabs.org/mailman/listinfo/users Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org
