I guess I have to say "never mind!" I don't know what the problem was yesterday, but it loads just fine today, even when the named config and the virtual ip don't match! But for your edamacation, ifconfig does NOT show the address although ip addr does:
ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:50:56:8b:d0:f7 brd ff:ff:ff:ff:ff:ff inet 192.168.30.36/26 brd 192.168.30.63 scope global eth0 valid_lft forever preferred_lft forever inet 192.168.30.38/26 brd 192.168.30.63 scope global secondary eth0 valid_lft forever preferred_lft forever ifconfig -a eth0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.30.36 netmask 255.255.255.192 broadcast 192.168.30.63 ether 00:50:56:8b:d0:f7 txqueuelen 1000 (Ethernet) RX packets 1169357 bytes 163514247 (155.9 MiB) RX errors 0 dropped 4639 overruns 0 frame 0 TX packets 1351613 bytes 210957790 (201.1 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 _______________________________________________ Users mailing list: Users@clusterlabs.org http://clusterlabs.org/mailman/listinfo/users Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org