Thanks Ken very much for the helpful information. It indeed help a lot for debbuging.
" Each time the DC decides what to do, there will be a line like "... saving inputs in ..." with a file name. The log messages just before that may give some useful information." - I am unable to find such information in the logs, it only prints some like /var/lib/pacemaker/pengine/pe-input-xx When I am comparing the cib.xml file of good with bad one, it diffetiates from the order of "name" and "id" as below shown, does it matter for cib to function normally? <operations> <op id="ovndb-servers-monitor-20" interval="20" name="monitor" timeout="30"/> <op id="ovndb-servers-start-0" interval="0" name="start" timeout="60"/> <op id="ovndb-servers-stop-0" interval="0" name="stop" timeout="60"/> <op id="ovndb-servers-promote-0" interval="0" name="promote" timeout="60"/> <op id="ovndb-servers-demote-0" interval="0" name="demote" timeout="60"/> </operations> <operations> <op name="monitor" interval="20" timeout="30" id="ovndb-servers-monitor-20"/> <op name="start" interval="0" timeout="60" id="ovndb-servers-start-0" /> <op name="stop" interval="0" timeout="60" id="ovndb-servers-stop-0" /> </operations> Thanks. Hui. On Sat, Dec 2, 2017 at 5:07 AM, Ken Gaillot <kgail...@redhat.com> wrote: > On Fri, 2017-12-01 at 09:36 +0800, Hui Xiang wrote: > > Hi all, > > > > I am using the ovndb-servers ocf agent[1] which is a kind of multi- > > state resource,when I am creating it(please see my previous email), > > the monitor is called only once, and the start operation is never > > called, according to below description, the once called monitor > > operation returned OCF_NOT_RUNNING, should the pacemaker will decide > > to execute start action based this return code? is there any way to > > Before Pacemaker does anything with a resource, it first calls a one- > time monitor (called a "probe") to find out the current status of the > resource across the cluster. This allows it to discover if the service > is already running somewhere. > > So, you will see those probes for every resource when the cluster > starts, or when the resource is added to the configuration, or when the > resource is cleaned up. > > > check out what is the next action? Currently in my environment > > nothing happened and I am almost tried all I known ways to debug, > > however, no lucky, could anyone help it out? thank you very much. > > > > Monitor Return Code Description > > OCF_NOT_RUNNING Stopped > > OCF_SUCCESS Running (Slave) > > OCF_RUNNING_MASTER Running (Master) > > OCF_FAILED_MASTER Failed (Master) > > Other Failed (Slave) > > > > > > [1] https://github.com/openvswitch/ovs/blob/master/ovn/utilities/ovnd > > b-servers.ocf > > Hui. > > > > > > > > On Thu, Nov 30, 2017 at 6:39 PM, Hui Xiang <xiangh...@gmail.com> > > wrote: > > > The really weired thing is that the monitor is only called once > > > other than expected repeatedly, where should I check for it? > > > > > > On Thu, Nov 30, 2017 at 4:14 PM, Hui Xiang <xiangh...@gmail.com> > > > wrote: > > > > Thanks Ken very much for your helpful infomation. > > > > > > > > I am now blocking on I can't see the pacemaker DC do any further > > > > start/promote etc action on my resource agents, no helpful logs > > > > founded. > > Each time the DC decides what to do, there will be a line like "... > saving inputs in ..." with a file name. The log messages just before > that may give some useful information. > > Otherwise, you can take that file, and simulate what the cluster > decided at that point: > > crm_simulate -Sx $FILENAME > > It will first show the status of the cluster at the start of the > decision-making, then a "Transition Summary" with the actions that are > required, then a simulated execution of those actions, and then what > the resulting status would be if those actions succeeded. > > That may give you some more information. You can make it more verbose > by using "-Ssx", or by adding "-VVVV", but it's not very user-friendly > output. > > > > > > > > > So my first question is that in what kind of situation DC will > > > > decide do call start action? does the monitor operation need to > > > > be return OCF_SUCCESS? in my case, it will return > > > > OCF_NOT_RUNNING, and the monitor operation is not being called > > > > any more, which should be wrong as I felt that it should be > > > > called intervally. > > The DC will ask for a start if the configuration and current status > require it. For example, if the resource's current status is stopped, > and the configuration calls for a target role of started (the default), > then it will start it. On the other hand, if the current status is > started, then it doesn't need to do anything -- or, if location > constraints ban all the nodes from running the resource, then it can't > do anything. > > So, it's all based on what the current status is (based on the last > monitor result), and what the configuration requires. > > > > > > > > > The resource agent monitor logistic: > > > > In the xx_monitor function it will call xx_update, and there > > > > always hit "$CRM_MASTER -D;;" , what does it usually mean? will > > > > it stopped that start operation being called? > > Each master/slave resource has a special node attribute with a "master > score" for that node. The node with the highest master score will be > promoted to master. It's up to the resource agent to set this > attribute. The "-D" call you see deletes that attribute (presumably > before updating it later). > > The master score has no effect on starting/stopping. > > > > > > > > > ovsdb_server_master_update() { > > > > ocf_log info "ovsdb_server_master_update: $1}" > > > > > > > > case $1 in > > > > $OCF_SUCCESS) > > > > $CRM_MASTER -v ${slave_score};; > > > > $OCF_RUNNING_MASTER) > > > > $CRM_MASTER -v ${master_score};; > > > > #*) $CRM_MASTER -D;; > > > > esac > > > > ocf_log info "ovsdb_server_master_update end}" > > > > } > > > > > > > > ovsdb_server_monitor() { > > > > ocf_log info "ovsdb_server_monitor" > > > > ovsdb_server_check_status > > > > rc=$? > > > > > > > > ovsdb_server_master_update $rc > > > > ocf_log info "monitor is going to return $rc" > > > > return $rc > > > > } > > > > > > > > > > > > Below is my cluster configuration: > > > > > > > > 1. First I have an vip set. > > > > [root@node-1 ~]# pcs resource show > > > > vip__management_old (ocf::es:ns_IPaddr2): Started > > > > node-1.domain.tld > > > > > > > > 2. Use pcs to create ovndb-servers and constraint > > > > [root@node-1 ~]# pcs resource create tst-ovndb ocf:ovn:ovndb- > > > > servers manage_northd=yes master_ip=192.168.0.2 > > > > nb_master_port=6641 sb_master_port=6642 master > > > > ([root@node-1 ~]# pcs resource meta tst-ovndb-master > > > > notify=true > > > > Error: unable to find a resource/clone/master/group: tst- > > > > ovndb-master) ## returned error, so I changed into below command. > > > > [root@node-1 ~]# pcs resource master tst-ovndb-master tst-ovndb > > > > notify=true > > > > [root@node-1 ~]# pcs constraint colocation add master tst-ovndb- > > > > master with vip__management_old > > > > > > > > 3. pcs status > > > > [root@node-1 ~]# pcs status > > > > vip__management_old (ocf::es:ns_IPaddr2): Started > > > > node-1.domain.tld > > > > Master/Slave Set: tst-ovndb-master [tst-ovndb] > > > > Stopped: [ node-1.domain.tld node-2.domain.tld node- > > > > 3.domain.tld ] > > > > > > > > 4. pcs resource show XXX > > > > [root@node-1 ~]# pcs resource show vip__management_old > > > > Resource: vip__management_old (class=ocf provider=es > > > > type=ns_IPaddr2) > > > > Attributes: nic=br-mgmt base_veth=br-mgmt-hapr ns_veth=hapr-m > > > > ip=192.168.0.2 iflabel=ka cidr_netmask=24 ns=haproxy gateway=none > > > > gateway_metric=0 iptables_start_rules=false > > > > iptables_stop_rules=false iptables_comment=default-comment > > > > Meta Attrs: migration-threshold=3 failure-timeout=60 resource- > > > > stickiness=1 > > > > Operations: monitor interval=3 timeout=30 (vip__management_old- > > > > monitor-3) > > > > start interval=0 timeout=30 (vip__management_old- > > > > start-0) > > > > stop interval=0 timeout=30 (vip__management_old- > > > > stop-0) > > > > [root@node-1 ~]# pcs resource show tst-ovndb-master > > > > Master: tst-ovndb-master > > > > Meta Attrs: notify=true > > > > Resource: tst-ovndb (class=ocf provider=ovn type=ovndb-servers) > > > > Attributes: manage_northd=yes master_ip=192.168.0.2 > > > > nb_master_port=6641 sb_master_port=6642 > > > > Operations: start interval=0s timeout=30s (tst-ovndb-start- > > > > timeout-30s) > > > > stop interval=0s timeout=20s (tst-ovndb-stop- > > > > timeout-20s) > > > > promote interval=0s timeout=50s (tst-ovndb- > > > > promote-timeout-50s) > > > > demote interval=0s timeout=50s (tst-ovndb-demote- > > > > timeout-50s) > > > > monitor interval=30s timeout=20s (tst-ovndb- > > > > monitor-interval-30s) > > > > monitor interval=10s role=Master timeout=20s (tst- > > > > ovndb-monitor-interval-10s-role-Master) > > > > monitor interval=30s role=Slave timeout=20s (tst- > > > > ovndb-monitor-interval-30s-role-Slave) > > > > > > > > > > > > colocation colocation-tst-ovndb-master-vip__management_old- > > > > INFINITY inf: tst-ovndb-master:Master vip__management_old:Started > > > > > > > > 5. I have put log in every ovndb-servers op, seems only the > > > > monitor op is being called, no promoted by the pacemaker DC: > > > > <30>Nov 30 15:22:19 node-1 ovndb-servers(tst-ovndb)[2980860]: > > > > INFO: ovsdb_server_monitor > > > > <30>Nov 30 15:22:19 node-1 ovndb-servers(tst-ovndb)[2980860]: > > > > INFO: ovsdb_server_check_status > > > > <30>Nov 30 15:22:19 node-1 ovndb-servers(tst-ovndb)[2980860]: > > > > INFO: return OCFOCF_NOT_RUNNINGG > > > > <30>Nov 30 15:22:20 node-1 ovndb-servers(tst-ovndb)[2980860]: > > > > INFO: ovsdb_server_master_update: 7} > > > > <30>Nov 30 15:22:20 node-1 ovndb-servers(tst-ovndb)[2980860]: > > > > INFO: ovsdb_server_master_update end} > > > > <30>Nov 30 15:22:20 node-1 ovndb-servers(tst-ovndb)[2980860]: > > > > INFO: monitor is going to return 7 > > > > <30>Nov 30 15:22:20 node-1 ovndb-servers(undef)[2980970]: INFO: > > > > metadata exit OCF_SUCCESS} > > > > > > > > 6. The cluster property: > > > > property cib-bootstrap-options: \ > > > > have-watchdog=false \ > > > > dc-version=1.1.12-a14efad \ > > > > cluster-infrastructure=corosync \ > > > > no-quorum-policy=ignore \ > > > > stonith-enabled=false \ > > > > symmetric-cluster=false \ > > > > last-lrm-refresh=1511802933 > > > > > > > > > > > > > > > > Thank you very much for any help. > > > > Hui. > > > > > > > > > > > > Date: Mon, 27 Nov 2017 12:07:57 -0600 > > > > From: Ken Gaillot <kgail...@redhat.com> > > > > To: Cluster Labs - All topics related to open-source clustering > > > > welcomed <users@clusterlabs.org>, jpokorny@redhat. > > > > com > > > > Subject: Re: [ClusterLabs] pcs create master/slave resource > > > > doesn't > > > > work > > > > Message-ID: <1511806077.5194.6.ca...@redhat.com> > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > On Fri, 2017-11-24 at 18:00 +0800, Hui Xiang wrote: > > > > > Jan, > > > > > > > > > > ? Very appreciated on your help, I am getting further more, but > > > > still > > > > > it looks very strange. > > > > > > > > > > 1. To use "debug-promote", I upgrade pacemaker from 1.12 to > > > > 1.16, pcs > > > > > to 0.9.160. > > > > > > > > > > 2. Recreate resource with below commands > > > > > pcs resource create ovndb_servers ocf:ovn:ovndb-servers \ > > > > > ? master_ip=192.168.0.99 \ > > > > > ? op monitor interval="10s" \ > > > > > ? op monitor interval="11s" role=Master > > > > > pcs resource master ovndb_servers-master ovndb_servers \ > > > > > ? meta notify="true" master-max="1" master-node-max="1" clone- > > > > max="3" > > > > > clone-node-max="1" > > > > > pcs resource create VirtualIP ocf:heartbeat:IPaddr2 > > > > ip=192.168.0.99 \ > > > > > ? ? op monitor interval=10s > > > > > pcs constraint colocation add VirtualIP with master > > > > ovndb_servers- > > > > > master \ > > > > > ? score=INFINITY > > > > > > > > > > 3. pcs status > > > > > ?Master/Slave Set: ovndb_servers-master [ovndb_servers] > > > > > ? ? ?Stopped: [ node-1.domain.tld node-2.domain.tld node- > > > > 3.domain.tld > > > > > ] > > > > > ?VirtualIP (ocf::heartbeat:IPaddr2): Stopped > > > > > > > > > > 4. Manually run 'debug-start' on 3 nodes and 'debug-promote' on > > > > one > > > > > of nodes > > > > > run below on [ node-1.domain.tld node-2.domain.tld node- > > > > 3.domain.tld > > > > > ] > > > > > # pcs resource debug-start ovndb_servers --full > > > > > run below on [ node-1.domain.tld ] > > > > > # pcs resource debug-promote ovndb_servers --full > > > > > > > > Before running debug-* commands, I'd unmanage the resource or put > > > > the > > > > cluster in maintenance mode, so Pacemaker doesn't try to > > > > "correct" your > > > > actions. > > > > > > > > > > > > > > 5. pcs status > > > > > ?Master/Slave Set: ovndb_servers-master [ovndb_servers] > > > > > ? ? ?Stopped: [ node-1.domain.tld node-2.domain.tld node- > > > > 3.domain.tld > > > > > ] > > > > > ?VirtualIP (ocf::heartbeat:IPaddr2): Stopped > > > > > > > > > > 6. However I have seen that one of ovndb_servers has been > > > > indeed > > > > > promoted as master, but pcs status still showed all 'stopped' > > > > > what am I missing? > > > > > > > > It's hard to tell from these logs. It's possible the resource > > > > agent's > > > > monitor command is not exiting with the expected status values: > > > > > > > > http://clusterlabs.org/doc/en-US/Pacemaker/1.1-pcs/html-single/Pa > > > > cemake > > > > r_Explained/index.html#_requirements_for_multi_state_resource_age > > > > nts > > > > > > > > One of the nodes will be elected the DC, meaning it coordinates > > > > the > > > > cluster's actions. The DC's logs will have more "pengine:" > > > > messages, > > > > with each action that needs to be taken (e.g. "* Start <rsc> > > > > <node>"). > > > > > > > > You can look through those actions to see what the cluster > > > > decided to > > > > do -- whether the resources were ever started, whether any was > > > > promoted, and whether any were explicitly stopped. > > > > > > > > > > > > > ?>? stderr: + 17:45:59: ocf_log:327: __OCF_MSG='ovndb_servers: > > > > > Promoting node-1.domain.tld as the master' > > > > > ?>? stderr: + 17:45:59: ocf_log:329: case "${__OCF_PRIO}" in > > > > > ?>? stderr: + 17:45:59: ocf_log:333: __OCF_PRIO=INFO > > > > > ?>? stderr: + 17:45:59: ocf_log:338: '[' INFO = DEBUG ']' > > > > > ?>? stderr: + 17:45:59: ocf_log:341: ha_log 'INFO: > > > > ovndb_servers: > > > > > Promoting node-1.domain.tld as the master' > > > > > ?>? stderr: + 17:45:59: ha_log:253: __ha_log 'INFO: > > > > ovndb_servers: > > > > > Promoting node-1.domain.tld as the master' > > > > > ?>? stderr: + 17:45:59: __ha_log:185: local ignore_stderr=false > > > > > ?>? stderr: + 17:45:59: __ha_log:186: local loglevel > > > > > ?>? stderr: + 17:45:59: __ha_log:188: '[' 'xINFO: > > > > ovndb_servers: > > > > > Promoting node-1.domain.tld as the master' = x--ignore-stderr > > > > ']' > > > > > ?>? stderr: + 17:45:59: __ha_log:190: '[' none = '' ']' > > > > > ?>? stderr: + 17:45:59: __ha_log:192: tty > > > > > ?>? stderr: + 17:45:59: __ha_log:193: '[' x = x0 -a x = xdebug > > > > ']' > > > > > ?>? stderr: + 17:45:59: __ha_log:195: '[' false = true ']' > > > > > ?>? stderr: + 17:45:59: __ha_log:199: '[' '' ']' > > > > > ?>? stderr: + 17:45:59: __ha_log:202: echo 'INFO: > > > > ovndb_servers: > > > > > Promoting node-1.domain.tld as the master' > > > > > ?>? stderr: INFO: ovndb_servers: Promoting node-1.domain.tld as > > > > the > > > > > master > > > > > ?>? stderr: + 17:45:59: __ha_log:204: return 0 > > > > > ?>? stderr: + 17:45:59: ovsdb_server_promote:378: > > > > > /usr/sbin/crm_attribute --type crm_config --name OVN_REPL_INFO > > > > -s > > > > > ovn_ovsdb_master_server -v node-1.domain.tld > > > > > ?>? stderr: + 17:45:59: ovsdb_server_promote:379: > > > > > ovsdb_server_master_update 8 > > > > > ?>? stderr: + 17:45:59: ovsdb_server_master_update:214: case $1 > > > > in > > > > > ?>? stderr: + 17:45:59: ovsdb_server_master_update:218: > > > > > /usr/sbin/crm_master -l reboot -v 10 > > > > > ?>? stderr: + 17:45:59: ovsdb_server_promote:380: return 0 > > > > > ?>? stderr: + 17:45:59: 458: rc=0 > > > > > ?>? stderr: + 17:45:59: 459: exit 0 > > > > > > > > > > > > > > > On 23/11/17 23:52 +0800, Hui Xiang wrote: > > > > > > I am working on HA with 3-nodes, which has below > > > > configurations: > > > > > >? > > > > > > """ > > > > > > pcs resource create ovndb_servers ocf:ovn:ovndb-servers \ > > > > > >???master_ip=168.254.101.2 \ > > > > > >???op monitor interval="10s" \ > > > > > >???op monitor interval="11s" role=Master > > > > > > pcs resource master ovndb_servers-master ovndb_servers \ > > > > > >???meta notify="true" master-max="1" master-node-max="1" > > > > clone- > > > > > max="3" > > > > > > clone-node-max="1" > > > > > > pcs resource create VirtualIP ocf:heartbeat:IPaddr2 > > > > > ip=168.254.101.2 \ > > > > > >?????op monitor interval=10s > > > > > > pcs constraint order promote ovndb_servers-master then > > > > VirtualIP > > > > > > pcs constraint colocation add VirtualIP with master > > > > ovndb_servers- > > > > > master \ > > > > > >???score=INFINITY > > > > > > """ > > > > > > > > > > (Out of curiosity, this looks like a mix of output from? > > > > > pcs config export pcs-commands [or clufter cib2pcscmd -s] > > > > > and manual editing.??Is this a good guess?) > > > > > It's the output of "pcs status". > > > > > > > > > > >???However, after setting it as above, the master is not being > > > > > selected, all > > > > > > are stopped, from pacemaker log, node-1 has been chosen as > > > > the > > > > > master, I am > > > > > > confuse where is wrong, can anybody give a help, it would be > > > > very > > > > > > appreciated. > > > > > >? > > > > > >? > > > > > >??Master/Slave Set: ovndb_servers-master [ovndb_servers] > > > > > >??????Stopped: [ node-1.domain.tld node-2.domain.tld node- > > > > > 3.domain.tld ] > > > > > >??VirtualIP (ocf::heartbeat:IPaddr2): Stopped > > > > > >? > > > > > >? > > > > > > # pacemaker log > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++ /cib/configuration/resources:??<primitive > > > > > class="ocf" > > > > > > id="ovndb_servers" provider="ovn" type="ovndb-servers"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: > > > > > ++??????????????????????????????????<instance_attributes > > > > > > id="ovndb_servers-instance_attributes"> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++????????????????????????????????????<nvpair > > > > > > id="ovndb_servers-instance_attributes-master_ip" > > > > name="master_ip" > > > > > > value="168.254.101.2"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: > > > > > ++??????????????????????????????????</instance_attributes> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: > > > > ++??????????????????????????????????<operations> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++????????????????????????????????????<op > > > > > > id="ovndb_servers-start-timeout-30s" interval="0s" > > > > name="start" > > > > > > timeout="30s"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++????????????????????????????????????<op > > > > > > id="ovndb_servers-stop-timeout-20s" interval="0s" name="stop" > > > > > > timeout="20s"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++????????????????????????????????????<op > > > > > > id="ovndb_servers-promote-timeout-50s" interval="0s" > > > > name="promote" > > > > > > timeout="50s"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++????????????????????????????????????<op > > > > > > id="ovndb_servers-demote-timeout-50s" interval="0s" > > > > name="demote" > > > > > > timeout="50s"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++????????????????????????????????????<op > > > > > > id="ovndb_servers-monitor-interval-10s" interval="10s" > > > > > name="monitor"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++????????????????????????????????????<op > > > > > > id="ovndb_servers-monitor-interval-11s-role-Master" > > > > interval="11s" > > > > > > name="monitor" role="Master"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: > > > > ++??????????????????????????????????</operations> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: > > > > ++????????????????????????????????</primitive> > > > > > >? > > > > > > Nov 23 23:06:03 [665249] node- > > > > 1.domain.tld??????attrd:?????info: > > > > > > attrd_peer_update: Setting master-ovndb_servers[node- > > > > 1.domain.tld]: > > > > > (null) > > > > > > -> 5 from node-1.domain.tld > > > > > > > > > > If it's probable your ocf:ovn:ovndb-servers agent in master > > > > mode can > > > > > run something like "attrd_updater -n master-ovndb_servers -U > > > > 5", then > > > > > it was indeed launched OK, and if it does not continue to run > > > > as > > > > > expected, there may be a problem with the agent itself. > > > > > > > > > > no change. > > > > > You can try running "pcs resource debug-promote ovndb_servers > > > > --full" > > > > > to examine the executation details (assuming the agent responds > > > > to > > > > > OCF_TRACE_RA=1 environment variable, which is what shell-based > > > > > agents built on top ocf-shellfuncs sourcable shell library from > > > > > resource-agents project, hence incl. also agents it ships, > > > > > customarily do). > > > > > Yes, thank, it's helpful. > > > > > > > > > > > Nov 23 23:06:03 [665251] node- > > > > 1.domain.tld???????crmd:???notice: > > > > > > process_lrm_event: Operation ovndb_servers_monitor_0: ok > > > > > > (node=node-1.domain.tld, call=185, rc=0, cib-update=88, > > > > > confirmed=true) > > > > > > <29>Nov 23 23:06:03 node-1 crmd[665251]:???notice: > > > > > process_lrm_event: > > > > > > Operation ovndb_servers_monitor_0: ok (node=node- > > > > 1.domain.tld, > > > > > call=185, > > > > > > rc=0, cib-update=88, confirmed=true) > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: Diff: --- 0.630.2 2 > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: Diff: +++ 0.630.3 (null) > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: +??/cib:??@num_updates=3 > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_perform_op: ++ > > > > > > > > > > > > > > > /cib/status/node_state[@id='1']/transient_attributes[@id='1']/ins > > > > tanc > > > > > e_attributes[@id='status-1']: > > > > > > <nvpair id="status-1-master-ovndb_servers" name="master- > > > > > ovndb_servers" > > > > > > value="5"/> > > > > > > Nov 23 23:06:03 [665246] node- > > > > 1.domain.tld????????cib:?????info: > > > > > > cib_process_request: Completed cib_modify operation for > > > > section > > > > > status: OK > > > > > > (rc=0, origin=node-3.domain.tld/attrd/80, version=0.630.3) > > > > > > > > > > Also depends if there's anything interesting after this > > > > point... > > > > > > > > > > _______________________________________________ > > > > > Users mailing list: Users@clusterlabs.org > > > > > http://lists.clusterlabs.org/mailman/listinfo/users > > > > > > > > > > Project Home: http://www.clusterlabs.org > > > > > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Sc > > > > ratch. > > > > > pdf > > > > > Bugs: http://bugs.clusterlabs.org > > > > -- > > > > Ken Gaillot <kgail...@redhat.com> > > > > > > > > > > > > > > > -- > Ken Gaillot <kgail...@redhat.com> >
_______________________________________________ Users mailing list: Users@clusterlabs.org http://lists.clusterlabs.org/mailman/listinfo/users Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org