Hi Andrei, After this state the system went through some more fencings and we saw the following state:
:~ # crm status Cluster Summary: * Stack: corosync * Current DC: FILE-2 (version 2.1.2+20211124.ada5c3b36-150400.2.43-2.1.2+20211124.ada5c3b36) - partition with quorum * Last updated: Mon Jun 26 12:44:15 2023 * Last change: Mon Jun 26 12:41:12 2023 by root via cibadmin on FILE-2 * 4 nodes configured * 11 resource instances configured Node List: * Node FILE-1: UNCLEAN (offline) * Node FILE-4: UNCLEAN (offline) * Online: [ FILE-2 ] * Online: [ FILE-3 ] At this stage FILE-1 and FILE-4 were continuously getting fenced (we have device based stonith configured but the resource was not up ) . Two nodes were online and two were offline. So quorum wasn't attained again. 1) For such a scenario we need help to be able to have one cluster live . 2) And in cases where only one node of the cluster is up and others are down we need the resources and cluster to be up . Thanks Priyanka On Tue, Jun 27, 2023 at 12:25 AM Andrei Borzenkov <arvidj...@gmail.com> wrote: > On 26.06.2023 21:14, Priyanka Balotra wrote: > > Hi All, > > We are seeing an issue where we replaced no-quorum-policy=ignore with > other > > options in corosync.conf order to simulate the same behaviour : > > > > > > * wait_for_all: 0* > > > > * last_man_standing: 1 last_man_standing_window: 20000* > > > > There was another property (auto-tie-breaker) tried but couldn't > configure > > it as crm did not recognise this property. > > > > But even after using these options, we are seeing that system is not > > quorate if at least half of the nodes are not up. > > > > Some properties from crm config are as follows: > > > > > > > > *primitive stonith-sbd stonith:external/sbd \ params > > pcmk_delay_base=5s.* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > *.property cib-bootstrap-options: \ have-watchdog=true \ > > > dc-version="2.1.2+20211124.ada5c3b36-150400.2.43-2.1.2+20211124.ada5c3b36" > > \ cluster-infrastructure=corosync \ cluster-name=FILE \ > > stonith-enabled=true \ stonith-timeout=172 \ > > stonith-action=reboot \ stop-all-resources=false \ > > no-quorum-policy=ignorersc_defaults build-resource-defaults: \ > > resource-stickiness=1rsc_defaults rsc-options: \ > > resource-stickiness=100 \ migration-threshold=3 \ > > failure-timeout=1m \ cluster-recheck-interval=10minop_defaults > > op-options: \ timeout=600 \ record-pending=true* > > > > On a 4-node setup when the whole cluster is brought up together we see > > error logs like: > > > > *2023-06-26T11:35:17.231104+00:00 FILE-1 pacemaker-schedulerd[26359]: > > warning: Fencing and resource management disabled due to lack of quorum* > > > > *2023-06-26T11:35:17.231338+00:00 FILE-1 pacemaker-schedulerd[26359]: > > warning: Ignoring malformed node_state entry without uname* > > > > *2023-06-26T11:35:17.233771+00:00 FILE-1 pacemaker-schedulerd[26359]: > > warning: Node FILE-2 is unclean!* > > > > *2023-06-26T11:35:17.233857+00:00 FILE-1 pacemaker-schedulerd[26359]: > > warning: Node FILE-3 is unclean!* > > > > *2023-06-26T11:35:17.233957+00:00 FILE-1 pacemaker-schedulerd[26359]: > > warning: Node FILE-4 is unclean!* > > > > According to this output FILE-1 lost connection to three other nodes, in > which case it cannot be quorate. > > > > > Kindly help correct the configuration to make the system function > normally > > with all resources up, even if there is just one node up. > > > > Please let me know if any more info is needed. > > > > Thanks > > Priyanka > > > > > > _______________________________________________ > > Manage your subscription: > > https://lists.clusterlabs.org/mailman/listinfo/users > > > > ClusterLabs home: https://www.clusterlabs.org/ > > _______________________________________________ > Manage your subscription: > https://lists.clusterlabs.org/mailman/listinfo/users > > ClusterLabs home: https://www.clusterlabs.org/ >
_______________________________________________ Manage your subscription: https://lists.clusterlabs.org/mailman/listinfo/users ClusterLabs home: https://www.clusterlabs.org/