Hi, The upstream bundle documentation is at:
https://clusterlabs.org/pacemaker/doc/2.1/Pacemaker_Explained/html/collective.html#bundles-containerized-resources There is also a walk-through: https://projects.clusterlabs.org/w/projects/pacemaker/bundle_walk-through/ Unfortunately, since that was written, the HA packages were taken off the RHEL UBI container image, so you'll have to adjust the instructions for some other distro base image that does have the HA packages. It should be nearly identical though. On Wed, 2024-07-17 at 11:56 +0000, MAIER Jakob via Users wrote: > Hi! > > I would like to setup a number of podman containers in two nodes such > that every container is running on both nodes (active-active). One of > the containers should be master while the other is slave, and when > there is a failure with the containers healthcheck, there should be a > failover. These two master-slave containers should also have a > virtual ip address assigned to them, that points to the current > master. There is sadly not a lot of documentation on bundles. I have > found some documentation from redhat on such “complex bundles”, but > unfortunately that is also not very detailed, and I don’t really know > how to proceed. > > Does anybody know how I could go about setting something like this > up? > > Kind regards, > Jakob > > _______________________________________________ > Manage your subscription: > https://lists.clusterlabs.org/mailman/listinfo/users > > ClusterLabs home: https://www.clusterlabs.org/ -- Ken Gaillot <kgail...@redhat.com> _______________________________________________ Manage your subscription: https://lists.clusterlabs.org/mailman/listinfo/users ClusterLabs home: https://www.clusterlabs.org/
