On Tue, Jan 15, 2008 at 02:23:15PM +0000, Steve O'Hara-Smith wrote: > On Tue, 15 Jan 2008 15:02:33 +0100 > Matthias Schmidt <[EMAIL PROTECTED]> wrote: > > > * Steve O'Hara-Smith wrote: > > > > > > It may help to know that I am running a recent 1.11.0 (Jan 12 or > > > thereabouts) which does recognise my Perfection 1240U and it works > > > (quick test, I haven't had to use it in a while). > > > > Could you please post the dmesg output (if there is any :)? > > Sure - there's not a lot: > > uscanner0: <EPSON Perfection1240, class 255/255, rev 1.00/1.04, addr 6> on > uhub3 > > Also from usbdevs -v > > port 2 addr 6: full speed, self powered, config 1, Perfection1240 > (0x010b), EPSON(0x04b8), rev 1.04
On my setup, even with a kernel printing an uscanner0 line in dmesg, the scanner never appears in the usbdevs output: # usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc012), Logitech(0x046d), rev 13.20 Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered -- Francois Tigeot