Hi, I've got an ASUS Eee PC 1000H and of course tried to boot DragonFly. It boots without any problems (see attached verbose dmesg and pciconf).
Anyone knows if there is a plan to port the Attansic age(4) driver to DragonFly (and the Ralink wireless)?
I'll now try to boot an SMP kernel and as well see if FreeBSD supports the age(4) and wireless.
Btw, it's a nice little "laptop", except the fan, which makes too much noise IMO.
Regards, Michael
hos...@pci0:0:0: class=0x060000 card=0x83401043 chip=0x27ac8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile 945GME Express Processor to DRAM Controller' class = bridge subclass = HOST-PCI a...@pci0:2:0: class=0x030000 card=0x83401043 chip=0x27ae8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile 945 Express Chipset Family' class = display subclass = VGA no...@pci0:2:1: class=0x038000 card=0x83401043 chip=0x27a68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile 945GM/GU Express Integrated Graphics Controller' class = display no...@pci0:27:0: class=0x040300 card=0x831a1043 chip=0x27d88086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) High Definition Audio' class = multimedia pc...@pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCIe Root Port' class = bridge subclass = PCI-PCI pc...@pci0:28:1: class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCIe Root Port' class = bridge subclass = PCI-PCI pc...@pci0:28:3: class=0x060400 card=0x00000040 chip=0x27d68086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCIe Root Port' class = bridge subclass = PCI-PCI uh...@pci0:29:0: class=0x0c0300 card=0x830f1043 chip=0x27c88086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uh...@pci0:29:1: class=0x0c0300 card=0x830f1043 chip=0x27c98086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uh...@pci0:29:2: class=0x0c0300 card=0x830f1043 chip=0x27ca8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uh...@pci0:29:3: class=0x0c0300 card=0x830f1043 chip=0x27cb8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB no...@pci0:29:7: class=0x0c0320 card=0x830f1043 chip=0x27cc8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB pc...@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI is...@pci0:31:0: class=0x060100 card=0x830f1043 chip=0x27b98086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM (ICH7-M) LPC Interface Controller' class = bridge subclass = PCI-ISA atap...@pci0:31:2: class=0x010180 card=0x830f1043 chip=0x27c48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller' class = mass storage subclass = ATA no...@pci3:0:0: class=0x020000 card=0x83241043 chip=0x10261969 rev=0xb0 hdr=0x00 vendor = 'Attansic (Now owned by Atheros)' device = 'L1 Gigabit Ethernet Adapter' class = network subclass = ethernet no...@pci1:0:0: class=0x028000 card=0x27901814 chip=0x07811814 rev=0x00 hdr=0x00 vendor = 'Ralink Technology, Corp' class = network
Copyright (c) 2003-2008 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly 2.1.1-DEVELOPMENT #0: Sat Dec 27 00:48:18 CET 2008 r...@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC Calibrating clock(s) ... TSC clock: 1596010932 Hz, i8254 clock: 1193189 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>> Hyperthreading: 2 logical CPUs real memory = 1064960000 (1040000K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00899000 - 0x3f78ffff, 1055879168 bytes (257783 pages) avail memory = 1019576320 (995680K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x31 pnpbios: Found PnP BIOS data at 0xc00f8940 pnpbios: Entry = f0000:99fa Rev = 1.0 Other BIOS signatures found: Preloaded elf kernel "/boot/kernel" at 0xc086c000. Preloaded elf module "/boot/modules/acpi.ko" at 0xc086c24c. wlan: <802.11 Link Layer> crypto: <crypto core> Pentium Pro MTRR support enabled md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27ac8086) pcibios: BIOS version 3.00 Using $PIR table, 9 entries at 0xc00f86e0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 1 C 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 1 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 30 A 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 30 B 0x68 3 4 5 6 7 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 31 B 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 27 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 28 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 28 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 28 C 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 28 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 29 A 0x6b 3 4 5 6 7 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 29 D 0x60 3 4 5 6 7 10 11 12 14 15 slot 35 1 0 A 0x63 3 4 5 6 7 10 11 12 14 15 slot 33 3 0 A 0x61 3 4 5 6 7 10 11 12 14 15 ACPI: RSDP @ 0x0xfb9e0/0x0014 (v 0 ACPIAM) ACPI: RSDT @ 0x0x3f7a0000/0x003C (v 1 A_M_I_ OEMRSDT 0x10000817 MSFT 0x00000097) ACPI: FACP @ 0x0x3f7a0200/0x0084 (v 2 A_M_I_ OEMFACP 0x10000817 MSFT 0x00000097) ACPI: DSDT @ 0x0x3f7a05b0/0x5124 (v 1 A1028 A1028000 0x00000000 INTL 0x20051117) ACPI: FACS @ 0x0x3f7ae000/0x0040 ACPI: APIC @ 0x0x3f7a0390/0x005C (v 1 A_M_I_ OEMAPIC 0x10000817 MSFT 0x00000097) ACPI: MCFG @ 0x0x3f7a03f0/0x003C (v 1 A_M_I_ OEMMCFG 0x10000817 MSFT 0x00000097) ACPI: OEMB @ 0x0x3f7ae040/0x0061 (v 1 A_M_I_ AMI_OEM 0x10000817 MSFT 0x00000097) ACPI: HPET @ 0x0x3f7a56e0/0x0038 (v 1 A_M_I_ OEMHPET 0x10000817 MSFT 0x00000097) ACPI: SSDT @ 0x0x3f7aeb80/0x04F0 (v 1 PmRef CpuPm 0x00003000 INTL 0x20051117) npx0.nexus0.root0 npx0: <math processor> [tentative] on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout npx0: <math processor> [attached!] on motherboard acpi0.nexus0.root0 acpi0: <A_M_I_ OEMRSDT> [tentative] on motherboard acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both acpi_ec0.acpi0.nexus0.root0 acpi_ec0: <Embedded Controller: GPE 0x1c> [tentative] port 0x66,0x62 on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> [attached!] port 0x66,0x62 on acpi0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 4, max = 6, width = 2 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 4, max = 6, width = 2 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 4, max = 6, width = 2 ACPI timer looks BAD min = 4, max = 7, width = 3 acpi_timer0.acpi0.nexus0.root0 acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0 cpu0.acpi0.nexus0.root0 cpu0: <ACPI CPU> [tentative] on acpi0 ACPI: SSDT @ 0x0x3f7ae450/0x0724 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20051117) ACPI: SSDT @ 0x0x3f7ae180/0x023C (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20051117) cpu0: <ACPI CPU> [attached!] port 0x814 on acpi0 acpi_tz0.acpi0.nexus0.root0 acpi_tz0: <Thermal Zone> [tentative] on acpi0 acpi_tz0: <Thermal Zone> [attached!] on acpi0 acpi_lid0.acpi0.nexus0.root0 acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0 acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0 acpi_button0.acpi0.nexus0.root0 acpi_button0: <Sleep Button> [tentative] on acpi0 acpi_button0: <Sleep Button> [attached!] on acpi0 acpi_button1.acpi0.nexus0.root0 acpi_button1: <Power Button> [tentative] on acpi0 acpi_button1: <Power Button> [attached!] on acpi0 battery0.acpi0.nexus0.root0 battery0: <ACPI Control Method Battery> [tentative] on acpi0 battery0: <ACPI Control Method Battery> [attached!] on acpi0 acpi_acad0.acpi0.nexus0.root0 acpi_acad0: <AC Adapter> [tentative] on acpi0 acpi_acad0: <AC Adapter> [attached!] on acpi0 atkbdc0.acpi0.nexus0.root0 atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0 atkbd0.atkbdc0.acpi0.nexus0.root0 atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0 psm0: current command byte:0065 battery0: battery initialization start acpi_ec0: info: new max delay is 830 us acpi_ec0: info: new max delay is 11000 us acpi_ec0: info: new max delay is 61000 us battery0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times psm0: failed to get data. psm0.atkbdc0.acpi0.nexus0.root0 psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:00, syncbits:00 psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0 atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0 acpi0: <A_M_I_ OEMRSDT> [attached!] at irq 9 on motherboard legacypci0.nexus0.root0 legacypci0 [tentative] on motherboard pcib0.legacypci0.nexus0.root0 pcib0: <Host to PCI bridge> [tentative] on legacypci0 pci0.pcib0.legacypci0.nexus0.root0 pci0: <PCI bus> [tentative] on pcib0 pci0: pci_attach() physical bus=0 found-> vendor=0x8086, dev=0x27ac, revid=0x03 bus=0, slot=0, func=0 class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f7f00000, size 19 map[14]: type 1, range 32, base 0000dc00, size 3 map[18]: type 1, range 32, base d0000000, size 28 map[1c]: type 1, range 32, base f7ec0000, size 18 found-> vendor=0x8086, dev=0x27ae, revid=0x03 bus=0, slot=2, func=0 class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base f7f80000, size 19 found-> vendor=0x8086, dev=0x27a6, revid=0x03 bus=0, slot=2, func=1 class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 64, base f7eb8000, size 14 found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 PCI Express ver.1 cap=0x0091 found-> vendor=0x8086, dev=0x27d0, revid=0x02 bus=0, slot=28, func=0 class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=4 secondarybus=4 intpin=a, irq=5 PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000060[HOTPLUG] found-> vendor=0x8086, dev=0x27d2, revid=0x02 bus=0, slot=28, func=1 class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=3 secondarybus=3 intpin=b, irq=10 PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000060[HOTPLUG] found-> vendor=0x8086, dev=0x27d6, revid=0x02 bus=0, slot=28, func=3 class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=2 secondarybus=1 intpin=d, irq=11 PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000060[HOTPLUG] map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x8086, dev=0x27c8, revid=0x02 bus=0, slot=29, func=0 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[20]: type 1, range 32, base 0000d480, size 5 found-> vendor=0x8086, dev=0x27c9, revid=0x02 bus=0, slot=29, func=1 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[20]: type 1, range 32, base 0000d800, size 5 found-> vendor=0x8086, dev=0x27ca, revid=0x02 bus=0, slot=29, func=2 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=7 map[20]: type 1, range 32, base 0000d880, size 5 found-> vendor=0x8086, dev=0x27cb, revid=0x02 bus=0, slot=29, func=3 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[10]: type 1, range 32, base f7eb7c00, size 10 found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 found-> vendor=0x8086, dev=0x2448, revid=0xe2 bus=0, slot=30, func=0 class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0 subordinatebus=5 secondarybus=5 found-> vendor=0x8086, dev=0x27b9, revid=0x02 bus=0, slot=31, func=0 class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x8086, dev=0x27c4, revid=0x02 bus=0, slot=31, func=2 class=[STORAGE]01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=255 agp0.pci0.pcib0.legacypci0.nexus0.root0 agp0: <Intel 945GME SVGA controller> [tentative] port 0xdc00-0xdc07 mem 0xf7ec0000-0xf7efffff,0xd0000000-0xdfffffff,0xf7f00000-0xf7f7ffff irq 5 at device 2.0 on pci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M agp0: <Intel 945GME SVGA controller> [attached!] port 0xdc00-0xdc07 mem 0xf7ec0000-0xf7efffff,0xd0000000-0xdfffffff,0xf7f00000-0xf7f7ffff irq 5 at device 2.0 on pci0 pci0: <unknown card> (vendor=0x8086, dev=0x27a6) at 2.1 pci0: <unknown card> (vendor=0x8086, dev=0x27d8) at 27.0 irq 5 pcib1.pci0.pcib0.legacypci0.nexus0.root0 pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> [tentative] irq 5 at device 28.0 on pci0 pcib1: secondary bus 4 pcib1: subordinate bus 4 pcib1: I/O decode 0x0-0x0 pcib1: memory decode 0x0-0x0 pcib1: prefetched decode 0x0-0x0 pci4.pcib1.pci0.pcib0.legacypci0.nexus0.root0 pci4: <PCI bus> [tentative] on pcib1 pci4: pci_attach() physical bus=4 pci4: <PCI bus> [attached!] on pcib1 pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> [attached!] irq 5 at device 28.0 on pci0 pcib2.pci0.pcib0.legacypci0.nexus0.root0 pcib2: <PCI to PCI bridge (vendor=8086 device=27d2)> [tentative] irq 10 at device 28.1 on pci0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0xe000-0xefff pcib2: memory decode 0xfbf00000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pci3.pcib2.pci0.pcib0.legacypci0.nexus0.root0 pci3: <PCI bus> [tentative] on pcib2 pci3: pci_attach() physical bus=3 map[10]: type 1, range 64, base fbfc0000, size 18 map[18]: type 1, range 32, base 0000ec00, size 7 found-> vendor=0x1969, dev=0x1026, revid=0xb0 bus=3, slot=0, func=0 class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 PCI Express ver.1 cap=0x0001[DEVICE] pci3: <unknown card> (vendor=0x1969, dev=0x1026) at 0.0 irq 10 pci3: <PCI bus> [attached!] on pcib2 pcib2: <PCI to PCI bridge (vendor=8086 device=27d2)> [attached!] irq 10 at device 28.1 on pci0 pcib3.pci0.pcib0.legacypci0.nexus0.root0 pcib3: <PCI to PCI bridge (vendor=8086 device=27d6)> [tentative] irq 11 at device 28.3 on pci0 pcib3: secondary bus 1 pcib3: subordinate bus 2 pcib3: I/O decode 0x0-0x0 pcib3: memory decode 0xf8000000-0xfbefffff pcib3: prefetched decode 0xf0000000-0xf6ffffff pci1.pcib3.pci0.pcib0.legacypci0.nexus0.root0 pci1: <PCI bus> [tentative] on pcib3 pci1: pci_attach() physical bus=1 map[10]: type 1, range 32, base fbef0000, size 16 found-> vendor=0x1814, dev=0x0781, revid=0x00 bus=1, slot=0, func=0 class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 PCI Express ver.1 cap=0x0001[DEVICE] pci1: <unknown card> (vendor=0x1814, dev=0x0781) at 0.0 irq 11 pci1: <PCI bus> [attached!] on pcib3 pcib3: <PCI to PCI bridge (vendor=8086 device=27d6)> [attached!] irq 11 at device 28.3 on pci0 uhci0.pci0.pcib0.legacypci0.nexus0.root0 uhci0: <UHCI (generic) USB controller> [tentative] port 0xd400-0xd41f irq 3 at device 29.0 on pci0 usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0 usb0: <UHCI (generic) USB controller> [tentative] on uhci0 usb0: USB revision 1.0 uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0 uhub0: 2 ports with 2 removable, self powered uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0 usb0: <UHCI (generic) USB controller> [attached!] on uhci0 uhci0: <UHCI (generic) USB controller> [attached!] port 0xd400-0xd41f irq 3 at device 29.0 on pci0 uhci1.pci0.pcib0.legacypci0.nexus0.root0 uhci1: <UHCI (generic) USB controller> [tentative] port 0xd480-0xd49f irq 11 at device 29.1 on pci0 usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0 usb1: <UHCI (generic) USB controller> [tentative] on uhci1 usb1: USB revision 1.0 uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1 uhub1: 2 ports with 2 removable, self powered uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1 usb1: <UHCI (generic) USB controller> [attached!] on uhci1 uhci1: <UHCI (generic) USB controller> [attached!] port 0xd480-0xd49f irq 11 at device 29.1 on pci0 uhci2.pci0.pcib0.legacypci0.nexus0.root0 uhci2: <UHCI (generic) USB controller> [tentative] port 0xd800-0xd81f irq 7 at device 29.2 on pci0 usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0 usb2: <UHCI (generic) USB controller> [tentative] on uhci2 usb2: USB revision 1.0 uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2 uhub2: 2 ports with 2 removable, self powered uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2 usb2: <UHCI (generic) USB controller> [attached!] on uhci2 uhci2: <UHCI (generic) USB controller> [attached!] port 0xd800-0xd81f irq 7 at device 29.2 on pci0 uhci3.pci0.pcib0.legacypci0.nexus0.root0 uhci3: <UHCI (generic) USB controller> [tentative] port 0xd880-0xd89f irq 5 at device 29.3 on pci0 usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0 usb3: <UHCI (generic) USB controller> [tentative] on uhci3 usb3: USB revision 1.0 uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3 uhub3: 2 ports with 2 removable, self powered uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3 usb3: <UHCI (generic) USB controller> [attached!] on uhci3 uhci3: <UHCI (generic) USB controller> [attached!] port 0xd880-0xd89f irq 5 at device 29.3 on pci0 pci0: <USB controller> (vendor=0x8086, dev=0x27cc) at 29.7 irq 3 pcib4.pci0.pcib0.legacypci0.nexus0.root0 pcib4: <PCI to PCI bridge (vendor=8086 device=2448)> [tentative] at device 30.0 on pci0 pcib4: secondary bus 5 pcib4: subordinate bus 5 pcib4: I/O decode 0x0-0x0 pcib4: memory decode 0x0-0x0 pcib4: prefetched decode 0x0-0x0 pcib4: Subtractively decoded bridge. pci5.pcib4.pci0.pcib0.legacypci0.nexus0.root0 pci5: <PCI bus> [tentative] on pcib4 pci5: pci_attach() physical bus=5 pci5: <PCI bus> [attached!] on pcib4 pcib4: <PCI to PCI bridge (vendor=8086 device=2448)> [attached!] at device 30.0 on pci0 isab0.pci0.pcib0.legacypci0.nexus0.root0 isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> [tentative] at device 31.0 on pci0 isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 isa0: <ISA bus> [tentative] on isab0 isa0: <ISA bus> [attached!] on isab0 isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> [attached!] at device 31.0 on pci0 atapci0.pci0.pcib0.legacypci0.nexus0.root0 atapci0: <Intel ICH7M SATA300 controller> [tentative] port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0 ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0 ata0: <ATA channel 0> [tentative] on atapci0 atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ugen0.uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0 ugen0: <Broadcom Corp BT-253, class 224/1, rev 2.00/2.41, addr 2> [tentative] on uhub3 umass0.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0 umass0: <vendor 0x0402 USB 2.0 Storage Device, class 0/0, rev 2.00/1.03, addr 2> [tentative] on uhub0 umass0:0:0:-1: Attached to scbus0 umass0: <vendor 0x0402 USB 2.0 Storage Device, class 0/0, rev 2.00/1.03, addr 2> [attached!] on uhub0 ugen0: <Broadcom Corp BT-253, class 224/1, rev 2.00/2.41, addr 2> [attached!] on uhub3 ugen1.uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0 ugen1: <Chicony Electronics Co., Ltd. CNF7129, class 239/2, rev 2.00/15.44, addr 3> [tentative] on uhub3 ugen1: <Chicony Electronics Co., Ltd. CNF7129, class 239/2, rev 2.00/15.44, addr 3> [attached!] on uhub3 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ad0: 152627MB <Seagate ST9160827AS 3.AAA> at ata0-master SATA150 ad0: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue ata0: <ATA channel 0> [attached!] on atapci0 ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0 ata1: <ATA channel 1> [tentative] on atapci0 atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x0f err=0x0f lsb=0x0f msb=0x0f ata1: stat1=0x57 err=0x57 lsb=0x57 msb=0x57 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x0 ata1: <ATA channel 1> [attached!] on atapci0 atapci0: <Intel ICH7M SATA300 controller> [attached!] port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0 pci0: <PCI bus> [attached!] on pcib0 pcib0: <Host to PCI bridge> [attached!] on legacypci0 legacypci0 [attached!] on motherboard ex_isa_identify() atkbdc-: atkbdc0 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 pmtimer0 [tentative] on isa0 pmtimer0 [attached!] on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 adv0 [tentative] failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 [tentative] failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 [tentative] failed to probe at port 0x134-0x137 on isa0 aic0 [tentative] failed to probe at port 0x140-0x15f on isa0 atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0 vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 sc0: <System console> [tentative] at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sc0: <System console> [attached!] at flags 0x100 on isa0 lm0 [tentative] failed to probe at port 0x290-0x297 on isa0 it0 [tentative] failed to probe at port 0x290-0x297 on isa0 it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0 it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0 sio0: can't drain, serial port might not exist, disabling sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio1: can't drain, serial port might not exist, disabling sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0 ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices BIOS Geometries: 0:03ff7f3f 0..1023=1024 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. lo0: bpf attached crypto: assign driver 0, flags 2 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 ppp0: bpf attached sl0: bpf attached faith0: bpf attached (probe0:umass-sim0:0:0:0): error 22 (probe0:umass-sim0:0:0:0): Unretryable Error pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <HL-DT-ST DVDRAM GSA-4160B A301> Removable CD-ROM SCSI-0 device pass0: 1.000MB/s transfers bootdev: a0000075 type=117 unit=0 slice=0 part=0 major=-1 ATA PseudoRAID loaded Mounting root from cd9660:cd0c cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-4160B A301> Removable CD-ROM SCSI-0 device cd0: 1.000MB/s transfers cd0: cd present [156466 x 2048 byte records] cd0: invalid primary partition table: no magic iso_mountroot(): using session at block 0 cd0: invalid primary partition table: no magic start_init: trying /sbin/init acpi_ec0: info: new max delay is 71000 us system power profile changed to 'economy' acpi_acad0: Off Line system power profile changed to 'performance' acpi_acad0: On Line umass1.uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0 umass1: <SanDisk Corporation Cruzer Micro, class 0/0, rev 2.00/0.20, addr 2> [tentative] on uhub1 umass1:3:1:-1: Attached to scbus3 umass1: <SanDisk Corporation Cruzer Micro, class 0/0, rev 2.00/0.20, addr 2> [attached!] on uhub1 pass1 at umass-sim1 bus 1 target 0 lun 0 pass1: <SanDisk Cruzer Micro 0.2> Removable Direct Access SCSI-2 device pass1: 1.000MB/s transfers da0 at umass-sim1 bus 1 target 0 lun 0 da0: <SanDisk Cruzer Micro 0.2> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 488MB (1000944 512 byte sectors: 64H 32S/T 488C) da0s1: type 0xb, start 63, end = 1000943, size 1000881 da0s1: C/H/S end 61/254/63 (996029) != end 1000943: invalid