On Sun, 25 Mar 2012 19:06:29 +0200, Robert Gauthier <321.rob...@gmail.com>
wrote:
.
Hi all!
Under any load although the CPU fan revs up,
> sysctl -a | grep fan0
hw.sensors.it3.fan0: 51 RPM
> dmesg | grep it3
it3 at port 0x228-0x22f on isa0
With OpenBSD
$ sysctl | grep fan0
hw.sensors.it0.fan0=2311 RPM
$ dmesg | grep it0
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x228
Sensors seem to be identified wrongly in dragonfly for this machine.
I tried replacing openbsd's adress range for it0 and commenting out it3.
No go.
Anyone could help me dig further into this?
I think OpenBSD's it(4) has been rewritten since.
If someone wants to port the changes back to ours, that would rock.
Regards,
Sascha