On 2/8/2017 7:19 AM, Shyam Shrivastav wrote: > Hi All > > I am not able to bind 82599 to either uio_pci_generic or vfio-pci > successfully. Any help greatly appreciated, I am completely stuck at this > initial step. > > *1) uio_pci_generic* : tools/dpdk-devbind.py script reports success but it > is not detected by EAL on initialisation, still ixgbe driver is detected. > here is relevant console output
It is detected, but according following log ports are not enabled by proper application (not eal) command line argument: " Cause: All available ports are disabled. Please set portmask." ./examples/l2fwd/build/l2fwd [EAL options] -- -p PORTMASK [-q NQ] -p PORTMASK: hexadecimal bitmask of ports to configure -q NQ: number of queue (=ports) per lcore (default is 1) -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum) --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default) When enabled: - The source MAC address is replaced by the TX port MAC address - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID <...> > > > > *2) vfio-pci :* Configured vfio permissions using setup.sh, bind script > reports error in this case as under Not sure about this one, below looks correct. Perhaps dmesg can tell more. <...> > > Thanks > Shyam >