> On Jul 20, 2017, at 8:28 PM, Tetsuro Nakamura <[email protected]> wrote: > > Hi all, > > > I moved from using pktgen3.0.13 to pktgen3.3.4 > > But sequence commands dont work as well on pktgen3.3.4.
I found the problem and push a new version pktgen-3.3.5 please give that one a try. > > > ``````` > > Pktgen:/> set 0 seq_cnt 2 > > # It works > > > Pktgen:/> sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01 192.168.1.1 > 192.168.0.1/24 1234 5678 ipv4 udp 1 64 > Sequence invalid command: > Invalid line: <sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01 > 192.168.1.1 192.168.0.1/24 1234 5678 ipv4 udp 1 64 > > > # doen't work though the command works on pktgen3.0.13 > > > Pktgen:/> sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01 192.168.1.1 > 192.168.0.1 1234 5678 ipv4 udp 1 64 > Sequence invalid command: > Invalid line: <sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01 > 192.168.1.1 192.168.0.1 1234 5678 ipv4 udp 1 64 > > > # without networkmask specification doen't work as well > > ``````` > > page seq works but shows the same sequences. > ``` > > Port: 0, Sequence Count: 2 of 16 > GTPu > Seq: Dst MAC Src MAC Dst IP > Src IP Port S/D Protocol:VLAN Size TEID > * 0: 00:00:00:00:00:00 0c:c4:7a:cf:66:c4 192.168.1.1 > 192.168.0.1/24 1234/5678 IPv4/TCP:0001 64 0 > * 1: 00:00:00:00:00:00 0c:c4:7a:cf:66:c4 192.168.1.1 > 192.168.0.1/24 1234/5678 IPv4/TCP:0001 64 0 > > ``` > > Is this a known problem? > Are there any way to work around? > > Thanks in advance. > Tetsuro Nakamura Regards, Keith
