Hi
We currently use DPDK v.18.11.9 with a 10GBe NIC based on the Intel X722
chipset. We bind to that device using the command:
usertools/dpdk-devbind.py -b igb_uio `lspci | grep X722 | awk '{print $1}'`
and it works ok.
Now we need to bind to a different NIC, which is part of an in-house FPGA
design (the NIC is 3rd party IP).
The new NIC is at 0d58 so we bind using:
usertools/dpdk-devbind.py -b igb_uio `lspci | grep 0d58 | awk '{print $1}'`
and we see:
dpdk-devbind.py --status Network devices using DPDK-compatible driver
============================================
0000:b3:00.0 'Device 0d58' drv=igb_uio unused=i40e
0000:b3:00.1 'Device 0d58' drv=igb_uio unused=i40e
0000:b5:00.0 'Device 0d58' drv=igb_uio unused=i40e
0000:b5:00.1 'Device 0d58' drv=igb_uio unused=i40e
But when we run our application, rte_eth_dev_count_avail() returns 0 so the
app fails.
I don't know how to debug this. Any suggestions please?
Best regards
David
