CC-ing maintainers.

I did observe that too. rx_out_of_buffer is always 0 since a few months (I did not personnaly try to revert versions as Gerry did, I assume it was a DPDK update indeed as Gerry verified).


Tom

Le 11-04-21 à 03:31, Gerry Wan a écrit :
After further investigation, I think this may be a bug introduced in DPDK
v20.11, where these "lost" packets should be counted as "rx_out_of_buffer"
and "rx_missed_errors". On v20.08 both of these counters increment, but
on
v20.11 and v21.02 these counters always remain 0.

Any workarounds for this? This is an important statistic for my use case.

On Fri, Apr 2, 2021 at 5:03 PM Gerry Wan <[email protected]> wrote:

I have a simple forwarding experiment using a mlx5 NIC directly connected
to a generator. I am noticing that at high enough throughput,
rx_good_packets + rx_phy_discard_packets may not equal rx_phy_packets.
Where are these packets being dropped?

Below is an example xstats where I receive at almost the limit of what
my
application can handle with no loss. It shows rx_phy_discard_packets is 0
but the number actually received by the CPU is less than rx_phy_packets.
rx_out_of_buffer and other errors are also 0.

I have disabled Ethernet flow control via rte_eth_dev_flow_ctrl_set with
mode = RTE_FC_NONE, if that matters.

{
     "rx_good_packets": 319992439,
     "tx_good_packets": 0,
     "rx_good_bytes": 19199546340,
     "tx_good_bytes": 0,
     "rx_missed_errors": 0,
     "rx_errors": 0,
     "tx_errors": 0,
     "rx_mbuf_allocation_errors": 0,
     "rx_q0_packets": 319992439,
     "rx_q0_bytes": 19199546340,
     "rx_q0_errors": 0,
     "rx_wqe_errors": 0,
     "rx_unicast_packets": 319999892,
     "rx_unicast_bytes": 19199993520,
     "tx_unicast_packets": 0,
     "tx_unicast_bytes": 0,
     "rx_multicast_packets": 0,
     "rx_multicast_bytes": 0,
     "tx_multicast_packets": 0,
     "tx_multicast_bytes": 0,
     "rx_broadcast_packets": 0,
     "rx_broadcast_bytes": 0,
     "tx_broadcast_packets": 0,
     "tx_broadcast_bytes": 0,
     "tx_phy_packets": 0,
     "rx_phy_packets": 319999892,
     "rx_phy_crc_errors": 0,
     "tx_phy_bytes": 0,
     "rx_phy_bytes": 20479993088,
     "rx_phy_in_range_len_errors": 0,
     "rx_phy_symbol_errors": 0,
     "rx_phy_discard_packets": 0,
     "tx_phy_discard_packets": 0,
     "tx_phy_errors": 0,
     "rx_out_of_buffer": 0,
     "tx_pp_missed_interrupt_errors": 0,
     "tx_pp_rearm_queue_errors": 0,
     "tx_pp_clock_queue_errors": 0,
     "tx_pp_timestamp_past_errors": 0,
     "tx_pp_timestamp_future_errors": 0,
     "tx_pp_jitter": 0,
     "tx_pp_wander": 0,
     "tx_pp_sync_lost": 0,
}



Reply via email to