Dear,
Yes, for the pcap, it is empty. I observe that on the pdump side, it will stuck in *EAL: VFIO support initialized *(red log below). After the primary application terminates, it will print the remaining log (blue log below). Is that normal ? *- Here's the log of pdump* [oran@localhost pdump]$ sudo ./dpdk-pdump --file-prefix wls_1 -- --pdump 'port=0,queue=*,tx-dev=/home/oran/Music/tx.pcap,rx-dev=/home/oran/Music/rx.pcap' [sudo] password for oran: EAL: Detected 96 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/wls_1/mp_socket_9612_d352314e70d54 EAL: Selected IOVA mode 'VA' EAL: Probing VFIO support... EAL: VFIO support initialized EAL: PCI device 0000:00:04.0 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.1 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.2 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.3 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.4 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.5 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.6 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.7 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:18:00.0 on NUMA socket 0 EAL: probe driver: 8086:1572 net_i40e EAL: PCI device 0000:18:00.1 on NUMA socket 0 EAL: probe driver: 8086:1572 net_i40e EAL: PCI device 0000:18:0a.0 on NUMA socket 0 EAL: probe driver: 8086:154c net_i40e_vf EAL: using IOMMU type 1 (Type 1) EAL: PCI device 0000:18:0a.1 on NUMA socket 0 EAL: probe driver: 8086:154c net_i40e_vf EAL: PCI device 0000:3d:00.0 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:3d:00.1 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:80:04.0 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.1 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.2 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.3 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.4 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.5 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.6 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.7 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat Port 2 MAC: 02 70 63 61 70 00 Port 3 MAC: 02 70 63 61 70 01 core (0), capture for (1) tuples - port 0 device ((null)) queue 65535 Primary process is no longer active, exiting... EAL: failed to send to (/var/run/dpdk/wls_1/mp_socket) due to Connection refused EAL: Fail to send request /var/run/dpdk/wls_1/mp_socket:mp_pdump PDUMP: client request for pdump enable/disable failed EAL: failed to send to (/var/run/dpdk/wls_1/mp_socket) due to Connection refused EAL: Fail to send request /var/run/dpdk/wls_1/mp_socket:eal_dev_mp_request EAL: Cannot send request to primary EAL: Failed to send hotplug request to primary EAL: failed to send to (/var/run/dpdk/wls_1/mp_socket) due to Connection refused EAL: Fail to send request /var/run/dpdk/wls_1/mp_socket:eal_dev_mp_request EAL: Cannot send request to primary EAL: Failed to send hotplug request to primary ##### PDUMP DEBUG STATS ##### -packets dequeued: 0 -packets transmitted to vdev: 0 -packets freed: 0 Best Regards, Shu-hua, Liao Pattan, Reshma <reshma.pat...@intel.com> 於 2021年11月17日 週三 下午6:01寫道: > > > > > *From:* 廖書華 <sim860...@gmail.com> > *Sent:* Wednesday, November 17, 2021 3:11 AM > *To:* Pattan, Reshma <reshma.pat...@intel.com> > *Cc:* users@dpdk.org > *Subject:* Re: Pdump Didn't capture the packet > > > > Dear, > > > > Thank you for the information ! > > I rerun the primary application with the other terminal running pdump, > however it still can't capture the packet. > > As for the logs you mentioned that is printed after the primary > application terminates. Also, for the primary application log, I can make > sure it transmits and receives the packet, but pdump still can't capture it. > > > > [Reshma]: Are the pcap captured files empty? That might need some > debugging I guess. When you stop the pdump application you should see below > stats. > > If you see 0 “*packets dequeued*”, that means there is no Packets > received from primary to pdump application. > > So, nee to debug the pdump library what is happening , why primary > application packets are not send to pdump application. You can try to > debugging the pdump library and pdump > > application. > > > > > > *packets dequeued:* > > > > *packets transmitted to vdev: * > > > > *packets freed: * > > *- For the log of pdump* > > [oran@localhost pdump]$ sudo ./dpdk-pdump --file-prefix wls_1 -- --pdump > 'port=0,queue=*,tx-dev=/home/oran/Music/tx.pcap,rx-dev=/home/oran/Music/rx.pcap' > > > > Also, do you know whether pdump can capture the virtual function packet or > not ? (We bind to vfio-pci) > > [Reshma]: I have not tested with VFs , I always used PFs. > > Best Regards, > > Shu-hua, Liao > > > > Pattan, Reshma <reshma.pat...@intel.com> 於 2021年11月15日 週一 下午4:58寫道: > > > > > > *From:* 廖書華 <sim860...@gmail.com> > *Sent:* Monday, November 15, 2021 5:39 AM > *To:* users@dpdk.org > *Cc:* 林庭安 <lingwan...@gmail.com> > *Subject:* Pdump Didn't capture the packet > > > > Dear all, > > > > Currently, I want to use pdump to capture our DPDK application, however > for the pdump side, unfortunately, didn't capture any packet, also pdump > didn't print any error. While for our application, it also didn't print any > log related to pdump. > *- Here's the log of pdump* > > [oran@localhost pdump]$ sudo ./dpdk-pdump --file-prefix wls_1 -- --pdump > 'port=0,queue=*,tx-dev=/home/oran/Music/tx.pcap,rx-dev=/home/oran/Music/rx.pcap' > > > > <snip> > > > > Primary process is no longer active, exiting... > > > > [Reshma]: From this log it is clear that, primary application is not > running. Rerun the primary application and in other terminal run the pdump > application. > > > > Best Regards, > > Shu-hua, Liao > >