Oh my god!! This Error was never notified me when I disconnected the USB WiFi doungle! But my notebook need USB WiFi doungle because its WiFi interface is not recognise by DF-BSD! How can I Resolve my problem?
On Wed, Jul 1, 2015 at 12:32 PM, Mohammad BadieZadegan <[email protected]> wrote: > Thanks Dear Matthew Dillon, > When I turn on my notebook and before Login this message was appeared > every 20 seconds! > I wonder that why this warning only reported by DragonflyBSD and did not > reported by other BSDs. > Thanks alot for your Help. > > On Tue, Jun 30, 2015 at 8:20 PM, Matthew Dillon <[email protected]> > wrote: > >> If you get PCS errors during moderate or heavy disk I/O it means there is >> probably too much electrical cross talk or noise on the SATA link. >> Probably a cabling issue. Either the cable is not shielded or the cable is >> going through an enclosure connector and not directly connected to the >> drive. Sometimes sub-stanadard motherboards have cross talk on the traces >> (though it is rare). Sometimes sub-standard hot-swap bay enclosures have >> similar issues. More likely the cable is not shielded. If it is a mobo >> issue you can try connecting the cable to a different SATA connector. >> >> Transient PCS errors are fairly serious if they occur at times other than >> when you are inserting or removing a drive from a hot swap bay. >> >> -Matt >> >> On Tue, Jun 30, 2015 at 5:38 AM, Mohammad BadieZadegan < >> [email protected]> wrote: >> >>> Hi everybody, >>> I installed DF-BSD 4.2.0 and while I standby or installing any tools the >>> message of *ahci0.4: Transient Errors: 40<PCS> (7)* notify me more >>> times! >>> What's the matter? If no problem how can I disable that? >>> Thanks. >>> >> >> > > > -- > [image: See you on my WEB] <http://933k.ir> > -- [image: See you on my WEB] <http://933k.ir>
