If you have an android phone you can turn on usb tethering and let it wifi-connect to your network while you connect the phone to your laptop with usb.
It'll create /dev/ue0 and you just need to issue dhcpclient /dev/ue0 (as root) To get everything working as an ad interim solution. Hope it helps you out a bit. On Thu, Oct 25, 2018, 10:09 Tobias Heilig <[email protected]> wrote: > hi guys, > > hope this is the right mailing list for my issue. > > i'm trying to boot dfly off my thinkpad t431s and obviously my wifi card is > causing some problem: > > > iwn0.pci3.pcib2.pci0.pcib0.acpi0.nexus0.root0 > iwn0: <Intel Centrino Advanced 6235> [tentative] mem 0xf0c00000-0xf0c01fff > irq 1 > 7 at device 0.0 on pci3 > iwn0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xf0c00000 > iwn0: attempting to allocate 1 MSI vector (1 supported) > alloc MSI intr 16 on cpu3 > iwn0: using IRQ 16 on cpu3 for MSI > iwn0: adapter type id : 0x088f sub id :0x5260 rev 11 not supported (subdevice) > iwn0: could not attach device, error 45 > panic: MSI rid 1 is not setup > cpuid = 0 > Trace beginning at frame 0xffffffff819718e0 > panic() at panic+0x236 0xffffffff805f8666 > panic() at panic+0x236 0xffffffff805f8666 > pci_teardown_intr() at pci_teardown_intr+0x2a1 0xffffffff8085c601 > iwn_detach() at iwn_detach+0xb9 0xffffffff804fbf89 > iwn_attach() at iwn_attach+0x7cb 0xffffffff804fc85b > device_doattach() at device_doattach+0x45 0xffffffff80622555 > Debugger("panic") > > CPU0 stopping CPUs: 0x0000000e > stopped > Stopped at Debugger+0x7c: movb $0,0xe67a49(%rip) > > after physically removing the wifi card and trying again it booted without > issues. Also, i checked /sys/dev/netif/iwn/if_iwn.c > <https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/if_iwn.c> > [1] and from what i can tell my wifi card is listed there and > /sys/dev/netif/iwn/fw/iwn60002g/Makefile > <https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/fw/iwn6000g2b/Makefile> > [2] contains the correct Firmware for it. unluckily, i'm not experienced > enough to troubleshoot further. any ideas on how to get it working? else, > is there any particular wifi card which is known to work good under dflybsd > 5.2.2 i can replace mine with? Thanks in advance. [1] > https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/if_iwn.c > [2] > https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/fw/iwn6000g2b/Makefile > > -- > best regards, > > Tobi > >
