Hello Krzysztof, using the settings you provided and disabling all ttyv* I was able to install DragonflyBSD.
However I believe I made a mistake when choosing vt100 as default console type at the end of the setup. I had problems editing files with ee and vi. Do you know which terminal type is best suited when connecting through a usb-to-serial adapter using putty? Best regards, Christoph Am 27.06.2020 um 14:54 schrieb Krzysztof Piecuch: > Resending this because I had some issues: > > Dillon suggested appending these options to /boot/loader.conf: > sio0.flags=0x10 > sio0.baud=115200 > set boot_serial="YES" > console=comconsole > set comconsole_speed=115200 > > After that, apu2d4 happily boots through serial console, no problems > detected. See the screencast [1] for full /boot/loader.conf example and > boot experience. > > Getty is spamming errors but I'm pretty sure you can disable it by > turning off other gettys by editing /etc/ttys. > > Chris > [1]: https://asciinema.org/a/TrJSLm3qeodtPCXHSrsIC1i3v >
signature.asc
Description: OpenPGP digital signature
