ie: the "label:" field shown under the "diskid:" one with disklabel64
It seems there is no switch (maybe -l) on disklabel64 (when using -w) to label a slice. eg: # /dev/da0s1: # # Calculated informational fields for the slice: # # boot space: 1044480 bytes # data space: 175691776 blocks # 171574.00 MB (179908378624 bytes) # # NOTE: The partition data base and stop are physically # aligned instead of slice-relative aligned. # # All byte equivalent offsets must be aligned. # diskid: af1b4686-d85d-11ea-9373-012324e2aca4 label: ... HOW TO SET THIS ONE ? boot2 data base: 0x000000001000 partitions data base: 0x000000100000 partitions data stop: 0x0029e3700000 backup label: 0x0029e37ff000 total size: 0x0029e3800000 # 171576.00 MB alignment: 4096 display block size: 1024 # for partition display and edit only 16 partitions: # size offset fstype fsuuid a: 1048576 0 4.2BSD # 1024.000MB d: 33554432 1048576 HAMMER2 # 32768.000MB e: 134217728 34603008 HAMMER2 # 131072.000MB f: 6871040 168820736 HAMMER2 # 6710.000MB a-stor_uuid: eb61372a-d85d-11ea-9373-012324e2aca4 d-stor_uuid: eb613733-d85d-11ea-9373-012324e2aca4 e-stor_uuid: eb613739-d85d-11ea-9373-012324e2aca4 f-stor_uuid: eb61373e-d85d-11ea-9373-012324e2aca4
