That might have done the trick. No hands yet. On Thu, Dec 3, 2020 at 9:54 AM Sepherosa Ziehau <[email protected]> wrote:
> On Tue, Dec 1, 2020 at 8:43 PM Ron Georgia <[email protected]> wrote: > > > > I do not experience any hangs with updates, if you by updates you mean > > the whole "git pull; make build-all install-all" thing. > > > > I have a small "mini" pc that has two RealTek NICs. If the pc sits idle > > for more than an hour I lose network connectivity. I can not access > > anything on my networks or on any external site. I have to do a "sudo > > service netif restart" to restore network capabilities. It happens only > > on that machine. I'm not sure if it's a BIOS setting or something else. > > I pushed the changes to the master; it may help this case, since there > are some register setting fixes in this driver update. > > Thanks, > sephe > > > > > On 11/29/2020 9:23 PM, Sepherosa Ziehau wrote: > > > Do you mean you still suffer the intermittent hang with the update? > > > > > > On Sun, Nov 29, 2020 at 11:37 PM Ron Georgia <[email protected]> > wrote: > > >> I have two machines with RealTek NICs. With "machine 1" the network > > >> constantly needed to be restarted (service netif restart) with RELEASE > > >> 5.8.3. So far under 5.9-DEVELOPMENT DragonFly > > >> v5.9.0.1113.gbf66a-DEVELOPMENT #5 dhclient(?) continues to work. > > >> > > >> QUESTION: Is there a test framework or procedure I can use? Something > > >> that might provide you with some test data? > > >> > > >> Machine 1: > > >> > > >> re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem > > >> 0xd0800000-0xd0803fff,0xd0804000-0xd0804fff irq 16 at device 0.0 on > pci1 > > >> re1: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem > > >> 0xd0600000-0xd0603fff,0xd0604000-0xd0604fff irq 16 at device 0.0 on > pci3 > > >> > > >> DragonFly v5.9.0.1113.gbf66a-DEVELOPMENT #5: Sat Nov 28 22:14:25 EST > 2020 > > >> [email protected]:/usr/obj/usr/src/sys/X86_64_GENERIC > > >> acpi_hpet: frequency 14318180 > > >> Using cputimer HPET for TSC calibration > > >> Timer latency (in TSC ticks): 1673 min=1656 max=2040 > > >> TSC invariant clock: 1999999800 Hz > > >> CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.00-MHz K8-class > CPU) > > >> Origin = "GenuineIntel" Id = 0x30678 Stepping = 8 > > >> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > >> > Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRND> > > >> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > > >> AMD Features2=0x101<LAHF,Prefetch> > > >> Structured Extended Features=0x2282<TSCADJ,SMEP,ENHMOVSB,NFPUSG> > > >> Structured Extended Features3=0xc000000<IBPB,STIBP> > > >> Thermal and PM Features=0x7<SENSOR,TURBO,ARAT> > > >> MONITOR/MWAIT Features=0x3<CST,INTBRK> > > >> CPU Special Features Installed: SMEP > > >> real memory = 8408166400 (8018 MB) > > >> avail memory = 8068538368 (7694 MB) > > >> > > >> Machine 2: > > >> > > >> re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem > > >> 0xf0300000-0xf0303fff,0xfcd00000-0xfcd00fff irq 29 at device 0.0 on > pci4 > > >> > > >> DragonFly v5.9.0.1017.g6be057-DEVELOPMENT #0: Fri Oct 30 10:42:52 UTC > 2020 > > >> [email protected]:/usr/obj/usr/src/sys/X86_64_GENERIC > > >> acpi_hpet: frequency 14318180 > > >> Using cputimer HPET for TSC calibration > > >> Timer latency (in TSC ticks): 5773 min=5705 max=5915 > > >> TSC invariant clock: 3493439208 Hz > > >> CPU: AMD Ryzen 3 2200G with Radeon Vega Graphics (3493.44-MHz > K8-class CPU) > > >> Origin = "AuthenticAMD" Id = 0x810f10 Stepping = 0 > > >> > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > > >> > Features2=0x76d8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,AVX,F16C,RDRND> > > >> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> > > >> AMD > > >> > Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCX_CORE,PCX_NB,DBE,PCX_L2I,MWAITX> > > >> Structured Extended > > >> > Features=0x209c01a9<GSFSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> > > >> Thermal and PM Features=0x4<ARAT> > > >> MONITOR/MWAIT Features=0x3<CST,INTBRK> > > >> CPU Special Features Installed: SMAP SMEP > > >> real memory = 14978347008 (14284 MB) > > >> avail memory = 14382575616 (13716 MB) > > >> > > >> > > >> On 2020-11-26 15:00, [email protected]: > > >>> Send Users mailing list submissions to > > >>> [email protected] > > >>> > > >>> To subscribe or unsubscribe via the World Wide Web, visit > > >>> http://lists.dragonflybsd.org/mailman/listinfo/users > > >>> or, via email, send a message with subject or body 'help' to > > >>> [email protected] > > >>> > > >>> You can reach the person managing the list at > > >>> [email protected] > > >>> > > >>> When replying, please edit your Subject line so it is more specific > > >>> than "Re: Contents of Users digest..." > > >>> > > >>> > > >>> Today's Topics: > > >>> > > >>> 1. Re: Call for test: Realtek wired NIC re(4) (Romick) > > >>> 2. Re: Call for test: Realtek wired NIC re(4) (Daniel Fojt) > > >>> > > >>> > > >>> > ---------------------------------------------------------------------- > > >>> > > >>> Message: 1 > > >>> Date: Thu, 26 Nov 2020 13:00:05 +1000 > > >>> From: Romick<[email protected]> > > >>> To:[email protected] > > >>> Subject: Re: Call for test: Realtek wired NIC re(4) > > >>> Message-ID:<[email protected]> > > >>> Content-Type: text/plain; charset="us-ascii" > > >>> > > >>> On Wed, Nov 25, 2020 at 10:54:16PM +0800, Sepherosa Ziehau wrote: > > >>>> > https://gitweb.dragonflybsd.org/~sephe/dragonfly.git/shortlog/refs/heads/re-196.04 > > >>>> > > >>>> So far, I have tested 8110, 8111, 8168 and 8125; all work as > expected. > > >>>> > > >>>> For 8125, the other side will also have to support 2.5Gbase-T to get > > >>>> it negotiated. For now, 2.5Gbase-T will be shown as 2500baseSX; it > > >>>> will be fixed soon. > > >>>> > > >>>> Please help test. It will be committed early next week. > > >>> I switched to the branch. The machine has booted up and works without > > >>> any problems so far. Let you know if anything overflows or freezes :) > > >>> > > >>> card=0x81681849 chip=0x816810ec rev=0x15 > > >>> Realtek RTL8111H integrated into ASRock B450M motherboard. > > >>> 100M mode. > > >>> > > > > > > > > > > -- > Tomorrow Will Never Die > -- Ron Georgia “90% of my problems are due to ignorance, the other 10% is because I just don’t know any better.”
