Hi,
Am 24.09.2014 um 09:00 schrieb Peter van Heusden:
> On 22/09/2014 16:54, Reuti wrote:
>> Am 22.09.2014 um 16:24 schrieb Peter van Heusden:
>>
>>> On 22/09/2014 15:50, Reuti wrote:
>>>> Hi,
>>>>
>>>> Am 22.09.2014 um 15:06 schrieb Peter van Heusden:
>>>>
>>>>> I'm running SGE 6.2u5 on Ubuntu 12.04 (64 bit). One of my compute nodes
>>>>> has 512 GB of RAM, but when I specify this (with e.g. h_vmem=500G in the
>>>>> complex_values setting for the exec host) and then submit a job that
>>>>> requires a lot of RAM (e.g. -l h_vmem=100G), I get this response:
>>>>>
>>>>> (-l h_vmem=100G) cannot run at host "bigmemhost.example.com" because it
>>>>> offers only hc:h_vmem=77309411328.000000
>>>> It's 72G expressed as bytes - is this the remaining memory in `qhost -F
>>>> h_vmem`? Hence the value is correct, just oddly notated?
>>> Nope, this is what I see:
>>>
>>> HOSTNAME ARCH NCPU LOAD MEMTOT MEMUSE SWAPTO
>>> SWAPUS
>>> -------------------------------------------------------------------------------
>>> bigmemhost.example.com lx26-amd64 16 7.01 503.9G 52.9G
>>> 5.2G 12.9M
>> Is "h_vmem" defined as a consumable too?
> Yes, here is the relevant output from the complex configuration:
>
> h_vmem h_vmem MEMORY <= YES YES
> 2G 0
>
>>
>> The above is the output of `qhost -F h_vmem`?
> Yes that is the output of qhost -F h_vmem.
This looks like an initial value for "h_vmem" attached to each exechost's
"complex_values" definition is missing.
$ qconf -se node001
...
complex_values h_vmem=256G
> Are you running SGE on a machine with larger than 100GB RAM available?
Yes:
$ qhost -F h_vmem
HOSTNAME ARCH NCPU LOAD MEMTOT MEMUSE SWAPTO SWAPUS
-------------------------------------------------------------------------------
global - - - - - - -
node001 lx24-amd64 64 0.00 252.4G 3.4G 8.0G 0.0
Host Resource(s): hc:h_vmem=256.000G
-- Reuti
>
>> -- Reuti
>>
>>
>>>> -- Reuti
>>>>
>>>>
>>>>> If I set the h_vmem to 99G or below I get a meaningful message, e.g.
>>>>>
>>>>> (-l h_vmem=100G) cannot run at host "smallmemhost.example.com" because
>>>>> it offers only hc:h_vmem=92.000G
>>>>>
>>>>> This definitely seems to be a bug - is there any way around this?
>>>>>
>>>>> Thanks!
>>>>> Peter
>>>>>
>>>>> _______________________________________________
>>>>> users mailing list
>>>>> [email protected]
>>>>> https://gridengine.org/mailman/listinfo/users
>
_______________________________________________
users mailing list
[email protected]
https://gridengine.org/mailman/listinfo/users
