On 7/25/2016 5:20 PM, Paul Roubekas wrote:
>
> 100% newbie, if my approach is off please let me know.
>
>
>
> Fedora 23
>
> httpd-2.4.23
>
> mod_proxy
>
> mod_ssl
>
> openssl
>
>
>
> I have a website that is 100% run by servlets. I have only one page
> that requires https, a payment processing page. My payment processor
> requires the page be https. Traffic is redirect by httpd to three
> different parts of the website. A backend Tomcat 7 server. A locally
> hosted phpBB forums site. And a locally hosted Bugzilla instance.
> The problem I am having is getting the directives correct. I have
> been able to get the https protocol prefix on the address to only show
> on the payment process page. The https protocol was sticking to all
> servlets after the https page was hit. The https port 8443 was also
> sticking in the address after the https page was hit. That behavior
> has stop with the below configuration. The issue I am now having is
> that I get an error from the browser when the https servlet is hit
> saying the server was not set up correctly. Once I accept the message
> and get to the https page all the CSS styling is gone from the page.
> The current configuration is in three parts.
>
>
>
> conf/httpd.conf
>
> conf/httpd-vhosts.conf
>
> conf.d/ssl.conf
>
>
>
> ======================== conf/httpd.conf =========================
>
> #
>
> # This is the main Apache HTTP server configuration file. It contains the
>
> # configuration directives that give the server its instructions.
>
> # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
>
> # In particular, see
>
> # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
>
> # for a discussion of each configuration directive.
>
> #
>
> # Do NOT simply read the instructions in here without understanding
>
> # what they do. They're here only as hints or reminders. If you are
> unsure
>
> # consult the online docs. You have been warned.
>
> #
>
> # Configuration and logfile names: If the filenames you specify for many
>
> # of the server's control files begin with "/" (or "drive:/" for
> Win32), the
>
> # server will use that explicit path. If the filenames do *not* begin
>
> # with "/", the value of ServerRoot is prepended -- so 'log/access_log'
>
> # with ServerRoot set to '/www' will be interpreted by the
>
> # server as '/www/log/access_log', where as '/log/access_log' will be
>
> # interpreted as '/log/access_log'.
>
>
>
> #
>
> # ServerRoot: The top of the directory tree under which the server's
>
> # configuration, error, and log files are kept.
>
> #
>
> # Do not add a slash at the end of the directory path. If you point
>
> # ServerRoot at a non-local disk, be sure to specify a local disk on the
>
> # Mutex directive, if file-based mutexes are used. If you wish to
> share the
>
> # same ServerRoot for multiple httpd daemons, you will need to change at
>
> # least PidFile.
>
> #
>
> ServerRoot "/etc/httpd"
>
>
>
> #
>
> # Listen: Allows you to bind Apache to specific IP addresses and/or
>
> # ports, instead of the default. See also the <VirtualHost>
>
> # directive.
>
> #
>
> # Change this to Listen on specific IP addresses as shown below to
>
> # prevent Apache from glomming onto all bound IP addresses.
>
> #
>
> #Listen 12.34.56.78:80
>
> Listen 80
>
>
>
> #
>
> # Dynamic Shared Object (DSO) Support
>
> #
>
> # To be able to use the functionality of a module which was built as a
> DSO you
>
> # have to place corresponding `LoadModule' lines at this location so the
>
> # directives contained in it are actually available _before_ they are
> used.
>
> # Statically compiled modules (those listed by `httpd -l') do not need
>
> # to be loaded here.
>
> #
>
> # Example:
>
> # LoadModule foo_module modules/mod_foo.so
>
> #
>
> Include conf.modules.d/*.conf
>
> Include conf/httpd-vhosts.conf
>
>
>
> #
>
> # If you wish httpd to run as a different user or group, you must run
>
> # httpd as root initially and it will switch.
>
> #
>
> # User/Group: The name (or #number) of the user/group to run httpd as.
>
> # It is usually good practice to create a dedicated user and group for
>
> # running httpd, as with most system services.
>
> #
>
> User apache
>
> Group apache
>
>
>
> # 'Main' server configuration
>
> #
>
> # The directives in this section set up the values used by the 'main'
>
> # server, which responds to any requests that aren't handled by a
>
> # <VirtualHost> definition. These values also provide defaults for
>
> # any <VirtualHost> containers you may define later in the file.
>
> #
>
> # All of these directives may appear inside <VirtualHost> containers,
>
> # in which case these default settings will be overridden for the
>
> # virtual host being defined.
>
> #
>
>
>
> #
>
> # ServerAdmin: Your address, where problems with the server should be
>
> # e-mailed. This address appears on some server-generated pages, such
>
> # as error documents. e.g. ad...@your-domain.com
>
> #
>
> ServerAdmin root@localhost
>
>
>
> #
>
> # ServerName gives the name and port that the server uses to identify
> itself.
>
> # This can often be determined automatically, but we recommend you specify
>
> # it explicitly to prevent problems during startup.
>
> #
>
> # If your host doesn't have a registered DNS name, enter its IP
> address here.
>
> #
>
> #ServerName www.example.com:80
>
>
>
> #
>
> # Deny access to the entirety of your server's filesystem. You must
>
> # explicitly permit access to web content directories in other
>
> # <Directory> blocks below.
>
> #
>
> <Directory />
>
> AllowOverride none
>
> Require all denied
>
> </Directory>
>
>
>
> #
>
> # Note that from this point forward you must specifically allow
>
> # particular features to be enabled - so if something's not working as
>
> # you might expect, make sure that you have specifically enabled it
>
> # below.
>
> #
>
>
>
> #
>
> # DocumentRoot: The directory out of which you will serve your
>
> # documents. By default, all requests are taken from this directory, but
>
> # symbolic links and aliases may be used to point to other locations.
>
> #
>
> DocumentRoot "/var/www/html"
>
>
>
> #
>
> # Relax access to content within /var/www.
>
> #
>
> <Directory "/var/www">
>
> AllowOverride None
>
> # Allow open access:
>
> Require all granted
>
> </Directory>
>
>
>
> # Further relax access to the default document root:
>
> <Directory "/var/www/html">
>
> #
>
> # Possible values for the Options directive are "None", "All",
>
> # or any combination of:
>
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> MultiViews
>
> #
>
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
>
> # doesn't give it to you.
>
> #
>
> # The Options directive is both complicated and important. Please see
>
> # http://httpd.apache.org/docs/2.4/mod/core.html#options
>
> # for more information.
>
> #
>
> Options Indexes FollowSymLinks
>
>
>
> #
>
> # AllowOverride controls what directives may be placed in
> .htaccess files.
>
> # It can be "All", "None", or any combination of the keywords:
>
> # Options FileInfo AuthConfig Limit
>
> #
>
> AllowOverride None
>
>
>
> #
>
> # Controls who can get stuff from this server.
>
> #
>
> Require all granted
>
> </Directory>
>
>
>
> #
>
> # DirectoryIndex: sets the file that Apache will serve if a directory
>
> # is requested.
>
> #
>
> <IfModule dir_module>
>
> DirectoryIndex index.html
>
> </IfModule>
>
>
>
> #
>
> # The following lines prevent .htaccess and .htpasswd files from being
>
> # viewed by Web clients.
>
> #
>
> <Files ".ht*">
>
> Require all denied
>
> </Files>
>
>
>
> #
>
> # ErrorLog: The location of the error log file.
>
> # If you do not specify an ErrorLog directive within a <VirtualHost>
>
> # container, error messages relating to that virtual host will be
>
> # logged here. If you *do* define an error logfile for a <VirtualHost>
>
> # container, that host's errors will be logged there and not here.
>
> #
>
> ErrorLog "logs/error_log"
>
>
>
> #
>
> # LogLevel: Control the number of messages logged to the error_log.
>
> # Possible values include: debug, info, notice, warn, error, crit,
>
> # alert, emerg.
>
> #
>
> LogLevel warn
>
>
>
> <IfModule log_config_module>
>
> #
>
> # The following directives define some format nicknames for use with
>
> # a CustomLog directive (see below).
>
> #
>
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\"" combined
>
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
>
>
> <IfModule logio_module>
>
> # You need to enable mod_logio.c to use %I and %O
>
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\" %I %O" combinedio
>
> </IfModule>
>
>
>
> #
>
> # The location and format of the access logfile (Common Logfile
> Format).
>
> # If you do not define any access logfiles within a <VirtualHost>
>
> # container, they will be logged here. Contrariwise, if you *do*
>
> # define per-<VirtualHost> access logfiles, transactions will be
>
> # logged therein and *not* in this file.
>
> #
>
> #CustomLog "logs/access_log" common
>
>
>
> #
>
> # If you prefer a logfile with access, agent, and referer information
>
> # (Combined Logfile Format) you can use the following directive.
>
> #
>
> CustomLog "logs/access_log" combined
>
> </IfModule>
>
>
>
> <IfModule alias_module>
>
> #
>
> # Redirect: Allows you to tell clients about documents that used to
>
> # exist in your server's namespace, but do not anymore. The client
>
> # will make a new request for the document at its new location.
>
> # Example:
>
> # Redirect permanent /foo http://www.example.com/bar
>
>
>
> #
>
> # Alias: Maps web paths into filesystem paths and is used to
>
> # access content that does not live under the DocumentRoot.
>
> # Example:
>
> # Alias /webpath /full/filesystem/path
>
> #
>
> # If you include a trailing / on /webpath then the server will
>
> # require it to be present in the URL. You will also likely
>
> # need to provide a <Directory> section to allow access to
>
> # the filesystem path.
>
>
>
> #
>
> # ScriptAlias: This controls which directories contain server
> scripts.
>
> # ScriptAliases are essentially the same as Aliases, except that
>
> # documents in the target directory are treated as applications and
>
> # run by the server when requested rather than as documents sent
> to the
>
> # client. The same rules about trailing "/" apply to ScriptAlias
>
> # directives as to Alias.
>
> #
>
> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
>
>
>
> </IfModule>
>
>
>
> #
>
> # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
>
> # CGI directory exists, if you have that configured.
>
> #
>
> <Directory "/var/www/cgi-bin">
>
> AllowOverride None
>
> Options None
>
> Require all granted
>
> </Directory>
>
>
>
> <IfModule mime_module>
>
> #
>
> # TypesConfig points to the file containing the list of mappings from
>
> # filename extension to MIME-type.
>
> #
>
> TypesConfig /etc/mime.types
>
>
>
> #
>
> # AddType allows you to add to or override the MIME configuration
>
> # file specified in TypesConfig for specific file types.
>
> #
>
> #AddType application/x-gzip .tgz
>
> #
>
> # AddEncoding allows you to have certain browsers uncompress
>
> # information on the fly. Note: Not all browsers support this.
>
> #
>
> #AddEncoding x-compress .Z
>
> #AddEncoding x-gzip .gz .tgz
>
> #
>
> # If the AddEncoding directives above are commented-out, then you
>
> # probably should define those extensions to indicate media types:
>
> #
>
> AddType application/x-compress .Z
>
> AddType application/x-gzip .gz .tgz
>
>
>
> #
>
> # AddHandler allows you to map certain file extensions to "handlers":
>
> # actions unrelated to filetype. These can be either built into
> the server
>
> # or added with the Action directive (see below)
>
> #
>
> # To use CGI scripts outside of ScriptAliased directories:
>
> # (You will also need to add "ExecCGI" to the "Options" directive.)
>
> #
>
> #AddHandler cgi-script .cgi
>
>
>
> # For type maps (negotiated resources):
>
> #AddHandler type-map var
>
>
>
> #
>
> # Filters allow you to process content before it is sent to the
> client.
>
> #
>
> # To parse .shtml files for server-side includes (SSI):
>
> # (You will also need to add "Includes" to the "Options" directive.)
>
> #
>
> AddType text/html .shtml
>
> AddOutputFilter INCLUDES .shtml
>
> </IfModule>
>
>
>
> #
>
> # Specify a default charset for all content served; this enables
>
> # interpretation of all content as UTF-8 by default. To use the
>
> # default browser choice (ISO-8859-1), or to allow the META tags
>
> # in HTML content to override this choice, comment out this
>
> # directive:
>
> #
>
> AddDefaultCharset UTF-8
>
>
>
> <IfModule mime_magic_module>
>
> #
>
> # The mod_mime_magic module allows the server to use various hints
> from the
>
> # contents of the file itself to determine its type. The
> MIMEMagicFile
>
> # directive tells the module where the hint definitions are located.
>
> #
>
> MIMEMagicFile conf/magic
>
> </IfModule>
>
>
>
> #
>
> # Customizable error responses come in three flavors:
>
> # 1) plain text 2) local redirects 3) external redirects
>
> #
>
> # Some examples:
>
> #ErrorDocument 500 "The server made a boo boo."
>
> #ErrorDocument 404 /missing.html
>
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
>
> #ErrorDocument 402 http://www.example.com/subscription_info.html
>
> #
>
>
>
> #
>
> # EnableMMAP and EnableSendfile: On systems that support it,
>
> # memory-mapping or the sendfile syscall may be used to deliver
>
> # files. This usually improves server performance, but must
>
> # be turned off when serving from networked-mounted
>
> # filesystems or if support for these functions is otherwise
>
> # broken on your system.
>
> # Defaults if commented: EnableMMAP On, EnableSendfile Off
>
> #
>
> #EnableMMAP off
>
> EnableSendfile on
>
>
>
> # Supplemental configuration
>
> #
>
> # Load config files in the "/etc/httpd/conf.d" directory, if any.
>
> IncludeOptional conf.d/*.conf
>
>
>
> ====================== conf/httpd-vhosts.conf =======================
>
> # Virtual Hosts
>
> #
>
> # Required modules: mod_log_config
>
>
>
> # If you want to maintain multiple domains/hostnames on your
>
> # machine you can setup VirtualHost containers for them. Most
> configurations
>
> # use only name-based virtual hosts so the server doesn't need to
> worry about
>
> # IP addresses. This is indicated by the asterisks in the directives
> below.
>
> #
>
> # Please see the documentation at
>
> # <URL:http://httpd.apache.org/docs/2.4/vhosts/>
>
> # for further details before you try to setup virtual hosts.
>
> #
>
> # You may use the command line option '-S' to verify your virtual host
>
> # configuration.
>
>
>
> #
>
> # VirtualHost example:
>
> # Almost any Apache directive may go into a VirtualHost container.
>
> # The first VirtualHost section is used for all requests that do not
>
> # match a ServerName or ServerAlias in any <VirtualHost> block.
>
> #
>
> #
>
> # VirtualHost example:
>
> # Almost any Apache directive may go into a VirtualHost container.
>
> # The first VirtualHost section is used for all requests that do not
>
> # match a ServerName or ServerAlias in any <VirtualHost> block.
>
> #
>
> #<VirtualHost *:80>
>
> # ServerAdmin webmas...@dummy-host.example.com
>
> # DocumentRoot "/var/www/dummy-host.example.com"
>
> # ServerName dummy-host.example.com
>
> # ServerAlias www.dummy-host.example.com
>
> # ErrorLog "/var/log/httpd/dummy-host.example.com-error_log"
>
> # CustomLog "/var/log/httpd/dummy-host.example.com-access_log" common
>
> #</VirtualHost>
>
>
>
> #<VirtualHost *:80>
>
> # ServerAdmin webmas...@dummy-host2.example.com
>
> # DocumentRoot "/var/www/dummy-host2.example.com"
>
> # ServerName dummy-host2.example.com
>
> # ErrorLog "/var/log/httpd/dummy-host2.example.com-error_log"
>
> # CustomLog "/var/log/httpd/dummy-host2.example.com-access_log" common
>
> #</VirtualHost>
>
>
>
> <VirtualHost *:80>
>
> ServerAdmin webmas...@mydomain.com
>
> DocumentRoot "/var/www/html/mydomain"
>
> ServerName mydomain.com
>
> # redirect to Mydomain phpBB forums
>
> Alias /bb /var/www/html/mydomain/bb
>
> # Don't let ProxyPass process the /bb alias
>
> ProxyPass "/bb" !
>
> # <Location /bb>
>
> # ProxyPass http://localhost/bb
>
> # </Location>
>
> # redirect to Mydomain Bugzilla
>
> Alias /tt /var/www/html/mydomain/tt
>
> # Don't let ProxyPass process the /tt alias
>
> ProxyPass "/tt" !
>
> # <Location /tt>
>
> # ProxyPass http://localhost/mydomain/tt
>
> # </Location>
>
> <Directory /usr/share/pear>
>
> Require all granted
>
> </Directory>
>
> <Directory /usr/share/php>
>
> Require all granted
>
> </Directory>
>
> # Turn on the rewrite Engine
>
> RewriteEngine on
>
> # Make sure you're not on HTTPS
>
> RewriteCond %{HTTPS} !=on
>
> # Send the DonateServlet to HTTPS
>
> RewriteRule ^/DonateServlet$ https://%{SERVER_NAME}/DonateServlet [R,L]
>
> # All https servlet(s) need the below. There also needs to be a
>
> # directive in the ssl.conf to process the https servlet(s)
>
> # ProxyPass "/DonateServlet" !
>
> # redirect to Mydomain main landing page.
>
> ProxyPass / ajp://localhost:8009/
>
> ProxyPassReverse / ajp://localhost:8009/
>
> ErrorLog "/var/log/mydomain.com-error_log"
>
> TransferLog "/var/log/mydomain.com-access_log"
>
> </VirtualHost>
>
>
>
> # TODO: Figure out why having two VirtualHost does not work.
>
> # I can only get one VirtualHost to work on burrowingOwl.
>
> # There maybe some other OS level configuration needed to get
>
> # the feature of httpd to manage two "virtualhosts".
>
> <VirtualHost *:80>
>
> ServerAdmin webmas...@mydomaintwo.com
>
> DocumentRoot "/var/www/html/mydomaintwo"
>
> ServerName mydomaintwo.com
>
> # redirect to Ortho Group LLC phpBB forums
>
> Alias /bb /var/www/html/mydomaintwo/bb
>
> # Don't let ProxyPass process the /bb alias
>
> # <Location /bb>
>
> # ProxyPass http://localhost/mydomaintwo/bb
>
> # </Location>
>
> # redirect to Ortho Group LLC Bugzilla
>
> Alias /tt /var/www/html/mydomaintwo/tt
>
> # Don't let ProxyPass process the /tt alias
>
> ProxyPass "/tt" !
>
> # <Location /tt>
>
> # ProxyPass http://localhost/mydomaintwo/tt
>
> # </Location>
>
> # redirect to Ortho Group LLC main landing page.
>
> ProxyPass / ajp://localhost:8009/
>
> ProxyPassReverse / ajp://localhost:8009/
>
> ErrorLog "/var/log/mydomaintwo.com-error_log"
>
> TransferLog "/var/log/mydomaintwo.com-access_log"
>
> </VirtualHost>
>
>
>
> ====================== conf.d/ssl.conf ============================
>
> #
>
> # When we also provide SSL we have to listen to the
>
> # the HTTPS port in addition.
>
> #
>
> Listen 443 https
>
>
>
> ##
>
> ## SSL Global Context
>
> ##
>
> ## All SSL configuration in this context applies both to
>
> ## the main server and all SSL-enabled virtual hosts.
>
> ##
>
>
>
> # Pass Phrase Dialog:
>
> # Configure the pass phrase gathering process.
>
> # The filtering dialog program (`builtin' is a internal
>
> # terminal dialog) has to provide the pass phrase on stdout.
>
> SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog
>
>
>
> # Inter-Process Session Cache:
>
> # Configure the SSL Session Cache: First the mechanism
>
> # to use and second the expiring timeout (in seconds).
>
> SSLSessionCache shmcb:/run/httpd/sslcache(512000)
>
> SSLSessionCacheTimeout 300
>
>
>
> # Pseudo Random Number Generator (PRNG):
>
> # Configure one or more sources to seed the PRNG of the
>
> # SSL library. The seed data should be of good random quality.
>
> # WARNING! On some platforms /dev/random blocks if not enough entropy
>
> # is available. This means you then cannot use the /dev/random device
>
> # because it would lead to very long connection times (as long as
>
> # it requires to make more entropy available). But usually those
>
> # platforms additionally provide a /dev/urandom device which doesn't
>
> # block. So, if available, use this one instead. Read the mod_ssl User
>
> # Manual for more details.
>
> SSLRandomSeed startup file:/dev/urandom 256
>
> SSLRandomSeed connect builtin
>
> #SSLRandomSeed startup file:/dev/random 512
>
> #SSLRandomSeed connect file:/dev/random 512
>
> #SSLRandomSeed connect file:/dev/urandom 512
>
>
>
> #
>
> # Use "SSLCryptoDevice" to enable any supported hardware
>
> # accelerators. Use "openssl engine -v" to list supported
>
> # engine names. NOTE: If you enable an accelerator and the
>
> # server does not start, consult the error logs and ensure
>
> # your accelerator is functioning properly.
>
> #
>
> SSLCryptoDevice builtin
>
> #SSLCryptoDevice ubsec
>
>
>
> ##
>
> ## SSL Virtual Host Context
>
> ##
>
>
>
> <VirtualHost _default_:443>
>
>
>
> # General setup for the virtual host, inherited from global configuration
>
> #DocumentRoot "/var/www/html"
>
> #ServerName www.example.com:443
>
>
>
> # Make sure the engine is on
>
> RewriteEngine on
>
>
>
> # Make sure you're not on port 80
>
> RewriteCond %{SERVER_PORT} !^80$
>
>
>
> # Rewrite everything except the URL you want in HTTPS
>
> RewriteCond %{REQUEST_URI} !^/DonateServlet$
>
> RewriteRule ^(.*)$ http://%{SERVER_NAME}$1 [R,L]
>
>
>
> # Send the DonateServlet to TomEE
>
> ProxyPass "/DonateServlet" "ajp://localhost:8009/DonateServlet"
>
>
>
> #
>
> # Mydomain Protected servlet
>
> #
>
> ProxyPass "/DonateServlet" "ajp://localhost:8009/DonateServlet"
>
> ErrorLog "/var/log/mydomain.com-error_log"
>
> TransferLog "/var/log/mydomain.com-access_log"
>
>
>
> # Use separate log files for the SSL virtual host; note that LogLevel
>
> # is not inherited from httpd.conf.
>
> ErrorLog logs/ssl_error_log
>
> TransferLog logs/ssl_access_log
>
> LogLevel warn
>
>
>
> # SSL Engine Switch:
>
> # Enable/Disable SSL for this virtual host.
>
> SSLEngine on
>
>
>
> # List the protocol versions which clients are allowed to connect with.
>
> # Disable SSLv3 by default (cf. RFC 7525 3.1.1). TLSv1 (1.0) should be
>
> # disabled as quickly as practical. By the end of 2016, only the
> TLSv1.2
>
> # protocol or later should remain in use.
>
> SSLProtocol all -SSLv3
>
> SSLProxyProtocol all -SSLv3
>
>
>
> # User agents such as web browsers are not configured for the user's
>
> # own preference of either security or performance, therefore this
>
> # must be the prerogative of the web server administrator who manages
>
> # cpu load versus confidentiality, so enforce the server's cipher order.
>
> SSLHonorCipherOrder on
>
>
>
> # SSL Cipher Suite:
>
> # List the ciphers that the client is permitted to negotiate.
>
> # See the mod_ssl documentation for a complete list.
>
> # The OpenSSL system profile is configured by default. See
>
> # update-crypto-policies(8) for more details.
>
> SSLCipherSuite PROFILE=SYSTEM
>
> SSLProxyCipherSuite PROFILE=SYSTEM
>
>
>
> # Server Certificate:
>
> # Point SSLCertificateFile at a PEM encoded certificate. If
>
> # the certificate is encrypted, then you will be prompted for a
>
> # pass phrase. Note that a kill -HUP will prompt again. A new
>
> # certificate can be generated using the genkey(1) command.
>
> SSLCertificateFile /etc/pki/tls/certs/localhost.crt
>
>
>
> # Server Private Key:
>
> # If the key is not combined with the certificate, use this
>
> # directive to point at the key file. Keep in mind that if
>
> # you've both a RSA and a DSA private key you can configure
>
> # both in parallel (to also allow the use of DSA ciphers, etc.)
>
> SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
>
>
>
> # Server Certificate Chain:
>
> # Point SSLCertificateChainFile at a file containing the
>
> # concatenation of PEM encoded CA certificates which form the
>
> # certificate chain for the server certificate. Alternatively
>
> # the referenced file can be the same as SSLCertificateFile
>
> # when the CA certificates are directly appended to the server
>
> # certificate for convinience.
>
> #SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
>
>
>
> # Certificate Authority (CA):
>
> # Set the CA certificate verification path where to find CA
>
> # certificates for client authentication or alternatively one
>
> # huge file containing all of them (file must be PEM encoded)
>
> #SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
>
>
>
> # Client Authentication (Type):
>
> # Client certificate verification type and depth. Types are
>
> # none, optional, require and optional_no_ca. Depth is a
>
> # number which specifies how deeply to verify the certificate
>
> # issuer chain before deciding the certificate is not valid.
>
> #SSLVerifyClient require
>
> #SSLVerifyDepth 10
>
>
>
> # Access Control:
>
> # With SSLRequire you can do per-directory access control based
>
> # on arbitrary complex boolean expressions containing server
>
> # variable checks and other lookup directives. The syntax is a
>
> # mixture between C and Perl. See the mod_ssl documentation
>
> # for more details.
>
> #<Location />
>
> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
>
> # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
>
> # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
>
> # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
>
> # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
>
> # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
>
> #</Location>
>
>
>
> # SSL Engine Options:
>
> # Set various options for the SSL engine.
>
> # o FakeBasicAuth:
>
> # Translate the client X.509 into a Basic Authorisation. This
> means that
>
> # the standard Auth/DBMAuth methods can be used for access
> control. The
>
> # user name is the `one line' version of the client's X.509
> certificate.
>
> # Note that no password is obtained from the user. Every entry in
> the user
>
> # file needs this password: `xxj31ZMTZzkVA'.
>
> # o ExportCertData:
>
> # This exports two additional environment variables:
> SSL_CLIENT_CERT and
>
> # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
>
> # server (always existing) and the client (only existing when client
>
> # authentication is used). This can be used to import the certificates
>
> # into CGI scripts.
>
> # o StdEnvVars:
>
> # This exports the standard SSL/TLS related `SSL_*' environment
> variables.
>
> # Per default this exportation is switched off for performance
> reasons,
>
> # because the extraction step is an expensive operation and is usually
>
> # useless for serving static content. So one usually enables the
>
> # exportation for CGI and SSI requests only.
>
> # o StrictRequire:
>
> # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
>
> # under a "Satisfy any" situation, i.e. when it applies access is
> denied
>
> # and no other module can change it.
>
> # o OptRenegotiate:
>
> # This enables optimized SSL connection renegotiation handling
> when SSL
>
> # directives are used in per-directory context.
>
> #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
>
> <Files ~ "\.(cgi|shtml|phtml|php3?)$">
>
> SSLOptions +StdEnvVars
>
> </Files>
>
> <Directory "/var/www/cgi-bin">
>
> SSLOptions +StdEnvVars
>
> </Directory>
>
>
>
> # SSL Protocol Adjustments:
>
> # The safe and default but still SSL/TLS standard compliant shutdown
>
> # approach is that mod_ssl sends the close notify alert but doesn't
> wait for
>
> # the close notify alert from client. When you need a different shutdown
>
> # approach you can use one of the following variables:
>
> # o ssl-unclean-shutdown:
>
> # This forces an unclean shutdown when the connection is closed,
> i.e. no
>
> # SSL close notify alert is send or allowed to received. This
> violates
>
> # the SSL/TLS standard but is needed for some brain-dead browsers. Use
>
> # this when you receive I/O errors because of the standard
> approach where
>
> # mod_ssl sends the close notify alert.
>
> # o ssl-accurate-shutdown:
>
> # This forces an accurate shutdown when the connection is closed,
> i.e. a
>
> # SSL close notify alert is send and mod_ssl waits for the close
> notify
>
> # alert of the client. This is 100% SSL/TLS standard compliant, but in
>
> # practice often causes hanging connections with brain-dead
> browsers. Use
>
> # this only for browsers where you know that their SSL implementation
>
> # works correctly.
>
> # Notice: Most problems of broken clients are also related to the HTTP
>
> # keep-alive facility, so you usually additionally want to disable
>
> # keep-alive for those clients, too. Use variable "nokeepalive" for
> this.
>
> # Similarly, one has to force some clients to use HTTP/1.0 to workaround
>
> # their broken HTTP/1.1 implementation. Use variables
> "downgrade-1.0" and
>
> # "force-response-1.0" for this.
>
> BrowserMatch "MSIE [2-5]" \
>
> nokeepalive ssl-unclean-shutdown \
>
> downgrade-1.0 force-response-1.0
>
>
>
> # Per-Server Logging:
>
> # The home of a custom SSL log file. Use this when you want a
>
> # compact non-error SSL logfile on a virtual host basis.
>
> CustomLog logs/ssl_request_log \
>
> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>
>
>
> </VirtualHost>
>
>
>
> ==================================================
>
>
>
> Question 1) I have a cert with a CA in a .jks file. Does httpd
> support that format?
>
> Question 2) My .jks certification file needs a password. I don't see
> any httpd directive asking for a password. What am I missing?
>
> Question 3) Why am I loosing my CCS?
>
> Question 4) Is there a better way? All the Rewrites seem messy to me
> for just one https servlet.
>
>
>
>
>
>
>
>
Bump