At 23:33 04.01.2001, Andrew Lowe wrote:
>Sorry if this question is out of place, but we have been having trouble
>working out how to start implementing an ipv6 test solution.
>
>We are based in Australia, and are a small to large local ISP and we are
>wanting to set up a testbed for ipv6. However our upstream provider
>(Telstra Bigpond) have told us that they will not be implementing any form
>of ipv6 for 5 years, so we have no way of being allocated real ipv6 address
>for some time..
>
>We were looking at setting up using "private" addresses such as those used
>in ipv4 (192.168.x.x etc.. ) but have been unable to find out what the ipv6
>"private" addresses, so that we could look into some application development
>under ipv6.
You can take site local addresses in this case, starting with fec0::/10
Or request a part of the experimental 6bone address space 3ffe::/16 and let
setup a tunnel to you.
Peter
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
