Hi Daniel, If it was just two ipv4 networks over an ipv6 backbone, you could use SSH tunneling. (http://freshmeat.net/projects/pty-redir/) If there are more then two ipv4 networks you could setup a "concentrator" as a tunnel endpoint for all your tunnels and route ipv4 traffic over the ipv6 backbone.
This is not the most elegant solution, but i will work! I use it as a vpn myself. Kind regards, @ On Mon, 2008-05-12 at 21:20 +0200, Daniel Paufler wrote: > Hi all > > I need some advice / hints on what to use to achive the following > requirements. > > My goal is to interconnect ipv4 networks via ipv6 only routing > infrasturcture. Imagine an ipv6 only mesh which connects ipv4 networks > behind the mesh-nodes. > > I found 6to4 tunnel - even automatic ones, but dont know what technology > will pass ipv4 traffic over ipv6 network. I want the internet to be able > to communicate with an ipv4 network over the ipv6 mesh and dont know > what software / concept to look at. > > Any hints will be appreciated. > > Regards > > Daniel > > _______________________________________________ > Users mailing list > Users@ipv6.org > https://lists.ipv6.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users@ipv6.org https://lists.ipv6.org/mailman/listinfo/users
