erick.fuentes wrote: >I see a few differences from what I use for smpp connections: > >- I use smsc-username instead of system-id. >- I also set dest-addr-ton and des-addr-npi. Does your SMSC accept the >standard numbers kannel send as destination ton/npi? (I believe they are >2/1) >- Is your SMSC configured interface as tranceiver instead of having two smpp >ports (receiver and transceiver)? > >Regards, > >Erick > >-----Original Message----- >From: Ignat Vassilev [mailto:[EMAIL PROTECTED]] >Sent: jueves, 23 de mayo de 2002 18:30 >To: erick.fuentes >Cc: [EMAIL PROTECTED] >Subject: Re: Problem with submit msgs > > >erick.fuentes wrote: > >>Ignat, >> >>Does your SMSC accept TON=0 and NPI=4? >> >>Regards, >> >>Erick >> >>-----Original Message----- >>From: Ignat Vassilev [mailto:[EMAIL PROTECTED]] >>Sent: jueves, 23 de mayo de 2002 17:49 >>To: [EMAIL PROTECTED] >>Subject: Problem with submit msgs >> >> >>Hi guys I'm new in this list >> >> >>I'm having problems submiting msgs to Logica's SMSC >>over SMPP 3.3. >>When I try to submit msgs Kannel receives >>2002-05-23 14:34:03 [5] DEBUG: SMPP[SMPP]: Manually forced source addr >>ton = 0, source add npi = 4 >>2002-05-23 14:34:04 [5] ERROR: SMPP[SMPP]: SMSC returned error code >>0x00000045 in response to submit_sm. >>2002-05-23 14:34:04 [5] ERROR: SMPP[SMPP]: SMSC returned error code >>0x00000045 in response to submit_sm. >> >>I'm ussing cvs-20020502 version >> >>any help will be much apreciated. >> >>/Ignat/ >> >> >> >Hi eric >Thanks for yor replay... >yes it does. Here you are my config for smpp > >group = smsc >smsc = smpp >interface-version = 3.3 >smsc-id = SMPP >host = 203.13.108.18 >port = 8011 >receive-port = 8011 >system-id = Futurelab6 >smsc-password = testlab6 >source-addr-ton = 0 >source-addr-npi = 4 >system-type = smpp >address-range = "" >keepalive = 0 > >and because in SMSC using TON and NPI for biling purpese I can not use >diferent TON and NPI > >Regards, >Ignat > > > > Hi Eric
I setup dest-addr-npi=1 and dest-addr-ton=1 that is what SMSC using. and changed system-id to smsc-username. SMSC is configured with transmiter and resiver it's a version 3.3 Logica SMSC But the problem still stay Regards Ignat