Dear all, I have configured a PPG as follow: - the PPG receives the WapPush requests - it sends it using OTA to end-users via SMPP protocol
As I have several WapPush accounts to connect on the PPG, I want to define one different SMPP account per WapPush account. So I have defined: group = core admin-port = 13000 smsbox-port = 13001 wapbox-port = 13002 admin-password = xxxxx wdp-interface-name = "*" box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" unified-prefix = "+358,00358,0;+,00" # WAPBOX SETUP, for pushing and for pulling (fetching) the wap data group = wapbox bearerbox-host = localhost syslog-level = none # PPG CORE SETUP, for defining the push request interface group = ppg ppg-url = /cgi-bin/test-wap-push.cgi ppg-port = 8080 concurrent-pushes = 100 trusted-pi = no users = 1024 ppg-deny-ip = 194.100.32.89;194.100.32.103 ppg-allow-ip = *.*.*.*; global-sender="mobileway" # SMSBOX SETUP (a kludge !) group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = "test" And for each account, I have defined: ########## account 1 group = smsc smsc = smpp smsc-id = smscid1 host = messaging.wappush.com port = 7901 receive-port = 7901 smsc-username = "login1" smsc-password = pwd1 system-type = "VMA" address-range = "" my-number= 3333333 enquire-link-interval=120 reconnect-delay=30 group = wap-push-user wap-push-user = wappushuser1 ppg-username = login1 ppg-password = pwd1 deny-ip = 222.222.222.222; allow-ip = *.*.*.*; ########## account 2 group = smsc smsc = smpp smsc-id = smscid2 host = messaging.wappush.com port = 7901 receive-port = 7901 smsc-username = "login2" smsc-password = pwd2 system-type = "VMA" address-range = "" my-number= 3333333 enquire-link-interval=120 reconnect-delay=30 group = wap-push-user wap-push-user = wappushuser2 ppg-username = login2 ppg-password = pwd2 deny-ip = 222.222.222.222; allow-ip = *.*.*.*; How can I be sure that when account1 sends a WapPush request, it will not connect on SMPP using SMPP login and pwd of account2 ? Actually when the PPG receives a request from WapPush account1, it sends a SMPP request using login and pwd of account2. Thanks for your help, Evelyne NOTTON