hello! problem is with dest-addr-ton as default it is 2 that means local, but i need to set it to 1 to send message, so that was and is the problem
thank you for your respons! "Peter Beckman" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > This pretty clearly states that your message was accepted by the SMPP > gateway tele2. In order to figure out what happened, you must contact > tele2. > > The below output says "tele2 accepted this message with message_id > 3AB76FF3." You may have to convert that from HEX to DECIMAL for them to > look it up... > > Beckman > > On Fri, 24 Sep 2004, Guzzi wrote: > >> i started configuring kannel to send messages trhough smsc but, as i >> send >> through http i get response "sent" but message does not arrive, i copied >> from log this info: >> 2004-09-23 22:26:25 [7] DEBUG: SMPP[tele2]: Got PDU: >> 2004-09-23 22:26:25 [7] DEBUG: SMPP PDU 0x80d8df8 dump: >> 2004-09-23 22:26:25 [7] DEBUG: type_name: submit_sm_resp >> 2004-09-23 22:26:25 [7] DEBUG: command_id: 2147483652 = 0x80000004 >> 2004-09-23 22:26:25 [7] DEBUG: command_status: 0 = 0x00000000 >> 2004-09-23 22:26:25 [7] DEBUG: sequence_number: 4 = 0x00000004 >> 2004-09-23 22:26:25 [7] DEBUG: message_id: "3AB76FF3" >> 2004-09-23 22:26:25 [7] DEBUG: SMPP PDU dump ends. >> >> can you tell is my cannel congfig wrong or smsc is not well configuret to >> send my messages? >> >> >> >> > > --------------------------------------------------------------------------- > Peter Beckman Internet > Guy > [EMAIL PROTECTED] > http://www.purplecow.com/ > --------------------------------------------------------------------------- > >
