You should read "AT+CNMI" as "AT+CNMI=?"... Sorry. > -----Message d'origine----- > De : Konstantin KABASSANOV [mailto:[EMAIL PROTECTED] > Envoyé : samedi 19 août 2006 10:32 > À : [EMAIL PROTECTED]; users@kannel.org > Objet : RE: Command AT+CNMI > > Hi, > > What happens if you try to manually send these commands to your phone > modem? > For instance, you can ask your modem to give you the parameters it accepts > for every command (in the case of CNMI it should be simply "AT+CNMI" with > nothing at the end). > > You can also look for the AT commands reference for your phone over > Internet, but it is probably hard to find. > > Konstantin > > _________________________________ > > Konstantin K. KABASSANOV > > LIP6/CNRS > 8, rue du Capitaine Scott > 75015 Paris, France > > Phone: +33 (0) 1 44 27 71 26 > Fax: +33 (0) 1 44 27 74 95 > > E-mail: [EMAIL PROTECTED] > Web: http://www.kabassanov.com > _________________________________ > > IMPORTANT! If you have tried to reply to this mail and you received a > stupid message, announcing that the mail had been rejected as spam, > please, resend your reply to the address above. > > The certificate used to sign this e-mail can be verified at: > http://igc.services.cnrs.fr/CNRS-Standard/recherche.html > > Mediocrity is the worst kind of failure... > > > _____________________________________________ > De : Alvaro Cornejo [mailto:[EMAIL PROTECTED] > Envoyé : samedi 19 août 2006 08:11 > À : users@kannel.org > Objet : RE: Command AT+CNMI > > Hi All > > Going further with my tests, I found that I can not send push-sms. The > smsbox says msg is received ok (through the http interface) but the > bearerbox got +CMS ERROR 304 (invalid PDU mode parameter). > > Is this error related to the issue below? I got no other error on the > smsbox.log nor bearerbox.log > > Help would be very appreciate. > > Regards > > Alvaro > > -----Mensaje original----- > De: Alvaro Cornejo [mailto:[EMAIL PROTECTED] > Enviado el: Viernes, 18 de Agosto de 2006 23:42 > Para: 'users@kannel.org' > Asunto: Command AT+CNMI > > Hi > > I´m staring using kannel with a sony K510a phone; while setting up the > config file and kannel, I see that the sony does not accept the full > AT+CNMI > command but only some of its parameters. > > Actually I need to set the init-string as AT+CNMI=2,3,0,1,0 in order to > have > the sony accept the command. It will not accept the default > AT+CNMI=1,2,0,1,0. It returns an error message. > > My question is, as the CNMI init string differs from the default and this > defines how the phone will handle & format incomming unsolicited messages, > how does I configure kannel to correctly process those messages according > to > what the modem is initialized for?... Or this does not really matter to > kannel? > > Regards > > > Alvaro
smime.p7s
Description: S/MIME cryptographic signature