Something looks very curious : detect-string = "SMSCConn"
It looks not to be a good detect string, "NOKIA" should be better. In case you have any questions, you should make test through hyperterminal. Best regards -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: samedi 2 août 2008 04:45 To: users@kannel.org; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Connectivity problem nokia 6630: Config file here is my complete smskannel.conf file: # # THIS IS A SAMPLE CONFIGURATION FOR SMS KANNEL # # This basic version is used for system testing. It expects 'fakesmsc' to # send messages which are replied with simple fixed text message. # It is run like this: # # 1% gw/bearerbox gw/smskannel.conf # 2% gw/smsbox gw/smskannel.conf # 3% test/fakesmsc -i 0.1 -m 100 "123 345 text nop" # # ..all 3 commands in separate shells (or screen sessions) # Note that you can run them in different machines but have to # add certain command line argument and configuration variables then # # # For any modifications to this file, see Kannel User Guide # If that does not help, see Kannel web page (http://www.kannel.org) and # various online help and mailing list archives # # Notes on those who base their configuration on this: # 1) check security issues! (allowed IPs, passwords and ports) # 2) groups cannot have empty rows inside them! # 3) read the user guide # # Kalle Marjola for Kannel project 2001, 2004 #--------------------------------------------- # CORE # # There is only one core group and it sets all basic settings # of the bearerbox (and system). You should take extra notes on # configuration variables like 'store-file' (or 'store-dir'), # 'admin-allow-ip' and 'access.log' group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar #status-password = foo #admin-deny-ip = "" #admin-allow-ip = "" #log-file = "/tmp/kannel.log" #log-level = 0 box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" #unified-prefix = "+358,00358,0;+,00" #access-log = "/tmp/access.log" #store-file = "kannel.store" #ssl-server-cert-file = "cert.pem" #ssl-server-key-file = "key.pem" #ssl-certkey-file = "mycertandprivkeyfile.pem" #--------------------------------------------- # SMSC CONNECTIONS # # SMSC connections are created in bearerbox and they handle SMSC specific # protocol and message relying. You need these to actually receive and send # messages to handset, but can use GSM modems as virtual SMSCs # This is a fake smsc connection, _only_ used to test the system and services. # It really cannot relay messages to actual handsets! group = smsc smsc = fake smsc-id = FAKE port = 10000 connect-allow-ip = 127.0.0.1 #--------------------------------------------- # SMSBOX SETUP # # Smsbox(es) do higher-level SMS handling after they have been received from # SMS centers by bearerbox, or before they are given to bearerbox for delivery group = smsbox bearerbox-host = 127.0.0.1 sendsms-port = 13013 global-sender = 13013 #sendsms-chars = "0123456789 +-" #log-file = "/tmp/smsbox.log" #log-level = 0 #access-log = "/tmp/access.log" #--------------------------------------------- # SEND-SMS USERS # # These users are used when Kannel smsbox sendsms interface is used to # send PUSH sms messages, i.e. calling URL like # http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar. .. group = sendsms-user username = tester password = foobar #user-deny-ip = "" #user-allow-ip = "" #--------------------------------------------- # SERVICES # # These are 'responses' to sms PULL messages, i.e. messages arriving from # handsets. The response is based on message content. Only one sms-service is # applied, using the first one to match. group = sms-service keyword = nop text = "You asked nothing and I did it!" # There should be always a 'default' service. This service is used when no # other 'sms-service' is applied. group = sms-service keyword = default text = "No service specified" ################################### test settings ##################### group = smsc smsc = at #modemtype = nokiaphone modemtype = SMSCConn #device = /dev/ttyACM0 device = /dev/ttyUSB0 # or output of lsusb #speed = 9600 speed = 115200 my-number = +923334324038 connect-allow-ip = 127.0.0.1 log-file = "/path/to/kannel/log/nokia-smsc.log" log-level = 0 sim-buffering = true keepalive = 1 # MODEMS group = modems id = SMSCConn name = nokiaphone #detect-string = "NOKIA" detect-string = "SMSCConn" detect-string2 = "6630 " init-string = "AT+CNMI=0,0,0,0,0" #need-sleep = true keepalive-cmd = "AT+CBC;+CSQ" message-storage = SM ############################ test settings ################################ #Nokia Modem #group = modems # id = nokiaphone # name = "Nokia Phone" # detect-string = "Nokia Mobile Phone" # need-sleep = true # keepalive-cmd = "AT+CBC;+CSQ" # enable-mms = false #Nokia Modem # group =smsc # smsc=at # modemtype="Nokia Phone" # device=/dev/ttyUSB0 # device=/dev/ttyS0 # speed=9200
