Hi again, Thank you for pointing out things I need to look out for,
I think my problem is the questionable stability of my modem. I tried to use another usb to serial cable which I use to configure another equipment; however I still get the same result, the modem can be detected but it cannot send messages successfully. Now when I try to send messages with kannel, sometimes in the smsc.log, I see that there are no Generic error when sending some messages and for some other messages the generic error thing still occurs. In the end messages are not sent successfully to the mobile phones intended to be the recipient. Do you think my suspicion is right? and what modems/phones could anyone recommend for me to use with kannel? Much thanks, Joyce ----- Original Message ---- From: Tharanga <[EMAIL PROTECTED]> To: Joyce Gutierrez <[EMAIL PROTECTED]> Sent: Monday, September 29, 2008 6:12:21 PM Subject: Re: Generic Error while Sending Message with Kannel may be ur convertion. usb to serial. ----- Original Message ----- From: Joyce Gutierrez To: Tharanga Cc: Kannel Sent: Monday, September 29, 2008 3:28 PM Subject: Re: Generic Error while Sending Message with Kannel Hi Tharanga, Actually I have tried minicom, because I am connecting my modem through a serial to USB port. When I type AT it says ok, but when I try other AT commands that I see kannel is using to send a particular message it always says error. For example: AT+CMGS=24^M > hello ERROR I also tried to use wvdial, and it can detect my modem on the usb port I connected my modem to. My OS can also detect it for when I look for the log in /var/log/messages I can see the following: Sep 17 15:03:52 host kernel: pl2303 2-2:1.0: pl2303 converter detected Sep 17 15:03:52 host kernel: usb 2-2: pl2303 converter now attached to ttyUSB0 Sep 17 15:03:52 host kernel: usbcore: registered new driver pl2303 Sep 17 15:03:52 host kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver Does this mean my problem is really my gsm modem? So much thanks, Joyce ----- Original Message ---- From: Tharanga <[EMAIL PROTECTED]> To: Tharanga <[EMAIL PROTECTED]>; Joyce Gutierrez <[EMAIL PROTECTED]> Cc: Kannel users <users@kannel.org> Sent: Monday, September 29, 2008 3:55:45 PM Subject: Re: Generic Error while Sending Message with Kannel sorry...it will not work for minicom. u have a USB.. can OS recognized your driver ? ----- Original Message ----- From: Tharanga To: Joyce Gutierrez Cc: Kannel users Sent: Monday, September 29, 2008 1:21 PM Subject: Re: Generic Error while Sending Message with Kannel May be the problem with your USB modem. try to connect it from minicom and see. (it should accept AT commands). otherthan that i cant see any problem in your config . --Tharanga Abeyseela-- ----- Original Message ----- From: Joyce Gutierrez To: Tharanga Cc: Kannel users Sent: Monday, September 29, 2008 12:35 PM Subject: Re: Generic Error while Sending Message with Kannel Hi, thanks for replying, here is my current kannel.conf group = core admin-port = 15000 smsbox-port = 15001 admin-password = password status-password = foo #admin-deny-ip = "" #admin-allow-ip = "" #http-proxy-host = #http-proxy-username = #http-proxy-password = log-file = "/var/log/kannel/kannel.log" log-level = 0 box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" #unified-prefix = "+358,00358,0;+,00" access-log = "/var/log/kannel/access.log" #store-file = "kannel.store" #ssl-server-cert-file = "cert.pem" #ssl-server-key-file = "key.pem" #ssl-certkey-file = "mycertandprivkeyfile.pem" group = smsc smsc = at modemtype = auto device = /dev/ttyUSB0 my-number = +639089568898 #smsc-center = +639180000130 smsc-id = SDI #port = 13001 #port = 10000 connect-allow-ip = 127.0.0.1 log-level = 0 log-file = /var/log/kannel/smsc.log #speed = 115200 group = smsbox bearerbox-host = 127.0.0.1 sendsms-port = 15013 global-sender = +639089568898 sendsms-chars = "0123456789 +-" log-file = "/var/log/kannel/smsbox.log" log-level = 0 access-log = "/var/log/kannel/smsboxaccess.log" group = sendsms-user username = tester password = foobar #user-deny-ip = "" #user-allow-ip = "" concatenation =true max-messages = 4 group = sms-service keyword = nop text = "You asked nothing and I did it!" group = sms-service keyword = default text = "No service specified" group = sms-service keyword = keyword-regex = .* catch-all = yes max-messages = 0 get-url = "http://localhost/sms.php?phone=%p&text=%a" include = "/usr/local/kannel/modems.conf" I hope somebody could somehow point out what problem I have to experience this sudden issue with my Kannel. I hope it's not hardware related as I have read on some other posts. But if it is might as well face it and replace my current gsm modem. Thank in advance, Joyce ----- Original Message ---- From: Tharanga <[EMAIL PROTECTED]> To: Joyce Gutierrez <[EMAIL PROTECTED]>; Kannel users <users@kannel.org> Sent: Monday, September 29, 2008 2:07:06 PM Subject: Re: Generic Error while Sending Message with Kannel Can u share your kannel.conf with us. --Tharanga Abeyseela-- ----- Original Message ----- From: Joyce Gutierrez To: Kannel users Sent: Monday, September 29, 2008 9:43 AM Subject: Generic Error while Sending Message with Kannel Hi guys, I suddenly had a problem with my kannel installation. I have successfully configured it in the past enabling my gsm modem to send and receive messages to and from a mobile phone. However, now, whenever I try to send messages with kannel, I always get a generic error as follows: 2008-09-29 11:32:41 [17132] [6] INFO: AT2[TSG]: AT SMSC successfully opened. 2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: TP-Validity-Period: 24.0 hours 2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: --> AT+CMGS=24^M 2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: <-- 2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: <-- > 2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: send command status: 1 2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: --> 0011000B819080893786F40000A70BC8329BFD06DDDF723619 2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: --> ^Z 2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: <-- ERROR 2008-09-29 11:33:19 [17132] [6] ERROR: AT2[TSG]: Generic error: ERROR 2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: send command status: -1 2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: --> AT+CMGS=24^M 2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: <-- > 2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: send command status: 1 2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: --> 0011000B819080893786F40000A70BC8329BFD06DDDF723619 I have tried to reset the modem I am using several times and also reinstall my kannel;but, unfortunately I still get the same error. I read in some posts that this problem could be caused by an unstable modem or SMSC. Could there be any work around on this? I just really need to revive my Kannel installation. Thanks in advance,