hello,
I am searching for also how to use Nokia N-/E-x Handy for receiving incoming SMS. But I don't think there is any other AT-commands for CNMI. (I haven't find one) Regards, Pai On Thu, Feb 12, 2009 at 4:57 PM, Alvaro Cornejo <cornejo.alv...@gmail.com>wrote: > > > There might be someone who uses nSeries phones. I don't know nokia > phones but it should have a way to set that feature... maybe there is > another command to do that. > > Have you tried nokia forums? > > Regards > > On Thu, 2009-02-12 at 16:47 +0100, kriko wrote: > > I was afraid of that. > > I tried on n95 an n73, both doesn't support CNMI. > > > > Thanks for clarifying! > > > > On Thu, 12 Feb 2009 16:42:51 +0100, Alvaro Cornejo < > cornejo.alv...@gmail.com> wrote: > > > > > Hi > > > > > > You need to set your phone to forward incoming messages to kannel. > > > > > > What phone do you use? You should use AT+CNMI=xxxx command to define > > > that. Check your modem at manual for more info > > > > > > as a tip: > > > > > > For Sony K510a: init-string = "AT+CNMI=2,3,0,1,0;+CMEE=1" > > > For Sony T610: init-string = "AT+CNMI=2,3,0,0,0;+CMEE=1" > > > For Sony T68: init-string = "AT+CNMI=3,1,2,0,0;+CMEE=1" > > > For Enfora 1218: init-string = "AT+CNMI=2,1,2,1,0; +CMEE=2" > > > > > > > > > as a sidenote: CMEE=1/2 is for enable modem error verbose. might not > > > work with some modems > > > > > > Hope Helps > > > > > > > > > > > > > |-----------------------------------------------------------------------------------------------------------------| > > > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > > > celular y Nextel > > > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > > > SMS y GPRS online > > > Visitenos en www.perusms.NET www.smsglobal.com.mx y > > > www.pravcom.com > > > > > > > > > > > > On Thu, Feb 12, 2009 at 9:45 AM, kriko <kristjan.ug...@gmail.com> > wrote: > > >> Default action like this? > > >> > > >> # Default service. > > >> group = sms-service > > >> keyword = default > > >> text = "No services defined" > > >> > > >> > > >> Is still cannot see received messages. Maybe it is gsm modem problem? > > >> How > > >> does it pool > > >> the phone for new messages, it does that on keep-alive intervals? > > >> > > >> On Thu, 12 Feb 2009 15:21:25 +0100, Alvaro Cornejo > > >> <cornejo.alv...@gmail.com> wrote: > > >> > > >>> You need to setup an smsuser and an action for the keyword or define > > >>> an default action, then kannel will send MO to your app for > processing > > >>> > > >>> > > >>> > > >>> > |-----------------------------------------------------------------------------------------------------------------| > > >>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde > cualquier > > >>> celular y Nextel > > >>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias > via > > >>> SMS y GPRS online > > >>> Visitenos en www.perusms.NET www.smsglobal.com.mx y > > >>> www.pravcom.com > > >>> > > >>> > > >>> > > >>> On Thu, Feb 12, 2009 at 9:15 AM, kriko <kristjan.ug...@gmail.com> > > >>> wrote: > > >>>> > > >>>> Hello! > > >>>> > > >>>> I'm using GSM modem for sending messages (nokia n95) and it works > > >>>> great. > > >>>> Starting bearerbox and smsbox in debug mode 0 from 2 separate > > >>>> consoles, I > > >>>> can see sms > > >>>> send requests, but no received messages. > > >>>> > > >>>> I would like to catch all incoming messages, tried sim-buffering and > > >>>> my > > >>>> phone > > >>>> doesn't like it (Generic error: ERROR). Setting message storage to > SM > > >>>> or > > >>>> ME > > >>>> doesn't help either. > > >>>> > > >>>> My working config: > > >>>> http://pastebin.com/m1f302bc1 > > >>>> > > >>>> Are there any other settings to explore for controlling incoming > > >>>> messages? > > >>>> > > >>>> > > >>>> > > >>>> -- > > >>>> kriko > > >>>> > > >>>> > > >>>> > > >>>> > > >> > > >> > > >> > > >> -- > > >> kriko > > >> > > >> > > >> > > > > > > > > > > > >