Seems your modem is requesting a PIN number. If so, you need to add
the necessary PIN into modem config or disable the PIN request in the
phone
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
2009/7/8 Nikos Balkanas <nbalka...@gmail.com>:
> Hi,
>
> Seems bb will read in only the first init-string it finds. Comment out the
> ATZ line and see what happens.
>
> BR,
> Nikos
>
> ----- Original Message -----
> From: Nikhil
> To: users@kannel.org
> Sent: Wednesday, July 08, 2009 4:31 PM
> Subject: Problem Connecting Motorola V3m
> Hi,
>
> I have recently set up Kannel 1.4.3 on a CentOS 5 box. The smsbox.conf reads
> as follows for my smsbox and modems (works fine with the device unplugged
> since it won't find anything on /dev/ttyACM0)
>
> # Connection for Motorola V3m
> group = smsc
> smsc = at
> modemtype = Motorola
> device = /dev/ttyACM0
> #My number here
> my-number = 91xxxxxxxx
> connect-allow-ip = 127.0.0.1
> log-level = 0
>
> #Modem config for Motorola V3m
> group = modems
> id = Motorola
> name = Motorola_V3m
> detect-string = Motorola
> init-string = "ATZ"
> init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>
> When I try to start the bearerbox with "sudo /usr/local/sbin/bearerbox
> smsbox.conf", it fails to initialise my device. Excerpts from the debug log
> are as follows:
>
> 08 18:40:16 [23574] [0] INFO: Kannel bearerbox II version 1.4.3 starting
> 2009-07-08 18:40:16 [23574] [0] INFO: MAIN: Start-up done, entering
> mainloop
> 2009-07-08 18:40:16 [23574] [0] DEBUG: smsc_fake: start
> called
> 2009-07-08 18:40:16 [23574] [0] DEBUG: AT2[/dev/ttyACM0]: start
> called
> 2009-07-08 18:40:16 [23574] [7] DEBUG: Thread 7
> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid
> 23574.
> 2009-07-08 18:40:16 [23574] [7] INFO: AT2[/dev/ttyACM0]: trying to use speed
> <9600> from modem
> definition
> 2009-07-08 18:40:16 [23574] [7] INFO: AT2[/dev/ttyACM0]: opening
> device
> 2009-07-08 18:40:16 [23574] [8] DEBUG: Thread 8
> (gw/bb_smscconn.c:sms_router) maps to pid
> 23574.
> 2009-07-08 18:40:16 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: device opened.
> Telnet mode =
> 0
> 2009-07-08 18:40:16 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: device
> opened
> 2009-07-08 18:40:16 [23574] [7] INFO: AT2[/dev/ttyACM0]: speed set to
> 9600
> 2009-07-08 18:40:16 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> ^M
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> AT^M
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> OK
> 2009-07-08 18:40:18 [23574] [7] INFO: AT2[/dev/ttyACM0]: Closing
> device
> 2009-07-08 18:40:18 [23574] [7] INFO: AT2[/dev/ttyACM0]: speed is
> 9600
> 2009-07-08 18:40:18 [23574] [7] INFO: AT2[/dev/ttyACM0]: opening
> device
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: device opened.
> Telnet mode =
> 0
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: device
> opened
> 2009-07-08 18:40:18 [23574] [7] INFO: AT2[/dev/ttyACM0]: Logging
> in
> 2009-07-08 18:40:18 [23574] [7] INFO: AT2[/dev/ttyACM0]: init
> device
> 2009-07-08 18:40:18 [23574] [7] INFO: AT2[/dev/ttyACM0]: speed set to
> 9600
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> ATZ^M
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> OK
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> AT^M
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> AT
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> OK
> 2009-07-08 18:40:18 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> AT&F^M
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> AT&F
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> OK
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> ATE0^M
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> ATE0
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> OK
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> AT+IFC=2,2^M
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> OK
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: -->
> AT+CPIN?^M
> 2009-07-08 18:40:19 [23574] [7] DEBUG: AT2[/dev/ttyACM0]: <--
> ERROR
> 2009-07-08 18:40:19 [23574] [7] ERROR: AT2[/dev/ttyACM0]: Generic error:
> ERROR
> 2009-07-08 18:40:19 [23574] [7] ERROR: AT2[/dev/ttyACM0]: Initialization of
> device
> failed.
> 2009-07-08 18:40:19 [23574] [7] INFO: AT2[/dev/ttyACM0]: Closing
> device
> 2009-07-08 18:40:19 [23574] [7] ERROR: AT2[/dev/ttyACM0]: Couldn't connect
> (retrying in 10 seconds).
>
> And it goes in a loop after that. As seen above, it fails to fetch a valid
> response for AT+CPIN command on my device. Also, I got the init-string
> values from wvdial.conf under /etc directory. Would be glad if anybody could
> point out something that is causing this problem.
> --
> Regards
> Nikhil Lanjewar
>
