Hi, Please find more information below. TIA
*HINT:* 1. Kannel runs on Redhat box 2. Modem is Wavecom supreme 10 ######### from kannel.conf ################# group = smsc smsc = at smsc-id = modemSmsc modemtype = WAVECOM device = /dev/ttyS0 my-number = ******** connect-allow-ip = 127.0.0.1 log-level = 0 keepalive = 4 denied-smsc-id = modemSmsc;webSmsc;* denied-prefix = 0;***;+***;+;* ####################################### ######### modems.conf ################# group = modems id = WAVECOM name = "WAVECOM" detect-string = "WAVECOM" ####################################### ######################### BB Log (When Kannel starts acting up) ################################### 2009-07-08 18:37:28 [4648] [0] INFO: Added logfile `/var/log/kannel/bearerbox.log' with level `0'. 2009-07-08 18:37:28 [4648] [0] INFO: Started access logfile `/var/log/kannel/bearer-access.log'. 2009-07-08 18:37:28 [4648] [0] INFO: HTTP: Opening server at port 55550. 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2009-07-08 18:37:28 [4648] [0] DEBUG: starting smsbox connection module 2009-07-08 18:37:28 [4648] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2009-07-08 18:37:28 [4648] [0] DEBUG: Adding smsbox routing to id <smsbox> for smsc id <modemSmsc> 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2009-07-08 18:37:28 [4648] [0] INFO: Set SMS resend frequency to 60 seconds. 2009-07-08 18:37:28 [4648] [0] INFO: SMS resend retry set to unlimited. 2009-07-08 18:37:28 [4648] [0] DEBUG: smsbox MO concatenated message handling enabled 2009-07-08 18:37:28 [4648] [0] INFO: DLR rerouting for smsc id <modemSmsc> disabled. 2009-07-08 18:37:28 [4648] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 4648. 2009-07-08 18:37:28 [4648] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 4648. 2009-07-08 18:37:28 [4648] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 4648. 2009-07-08 18:37:28 [4648] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 4648. 2009-07-08 18:37:28 [4648] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 4648. 2009-07-08 18:37:28 [4648] [0] INFO: AT2[modemSmsc]: configuration shows modemtype <WAVECOM> 2009-07-08 18:37:28 [4648] [0] DEBUG: AT2[modemSmsc]: Reading modem definitions from </etc/kannel/kannel.conf> 2009-07-08 18:37:28 [4648] [0] DEBUG: Loading include file `/etc/kannel/smsbox.conf' (on line 100 of file /etc/kannel/kannel.conf). 2009-07-08 18:37:28 [4648] [0] DEBUG: Loading include file `/etc/kannel/modems.conf' (on line 162 of file /etc/kannel/kannel.conf). 2009-07-08 18:37:28 [4648] [0] DEBUG: AT2[modemSmsc]: Found <1> modems in config 2009-07-08 18:37:28 [4648] [0] INFO: AT2[modemSmsc]: read modem definition for <WAVECOM> 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2009-07-08 18:37:28 [4648] [0] INFO: DLR rerouting for smsc id <webSmsc> disabled. 2009-07-08 18:37:28 [4648] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4648. 2009-07-08 18:37:28 [4648] [6] INFO: AT2[modemSmsc]: trying to use speed <9600> from modem definition 2009-07-08 18:37:28 [4648] [6] INFO: AT2[modemSmsc]: opening device 2009-07-08 18:37:28 [4648] [6] DEBUG: AT2[modemSmsc]: device opened. Telnet mode = 0 2009-07-08 18:37:28 [4648] [0] INFO: HTTP: Opening server at port 8100. 2009-07-08 18:37:28 [4648] [6] DEBUG: AT2[modemSmsc]: device opened 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 7 (gw/smsc/smsc_http.c:httpsmsc_receiver) 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 8 (gw/smsc/smsc_http.c:httpsmsc_send_cb) 2009-07-08 18:37:28 [4648] [7] DEBUG: Thread 7 (gw/smsc/smsc_http.c:httpsmsc_receiver) maps to pid 4648. 2009-07-08 18:37:28 [4648] [0] INFO: HTTP[webSmsc]: Initiated and ready 2009-07-08 18:37:28 [4648] [8] DEBUG: Thread 8 (gw/smsc/smsc_http.c:httpsmsc_send_cb) maps to pid 4648. 2009-07-08 18:37:28 [4648] [0] DEBUG: Started thread 9 (gw/bb_smscconn.c:sms_router) 2009-07-08 18:37:28 [4648] [0] INFO: ---------------------------------------- 2009-07-08 18:37:28 [4648] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2009-07-08 18:37:28 [4648] [0] INFO: MAIN: Start-up done, entering mainloop 2009-07-08 18:37:28 [4648] [0] DEBUG: AT2[modemSmsc]: start called 2009-07-08 18:37:28 [4648] [6] INFO: AT2[modemSmsc]: speed set to 9600 2009-07-08 18:37:28 [4648] [6] DEBUG: AT2[modemSmsc]: --> ^M 2009-07-08 18:37:28 [4648] [9] DEBUG: Thread 9 (gw/bb_smscconn.c:sms_router) maps to pid 4648. 2009-07-08 18:37:30 [4648] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-08 18:37:30 [4648] [5] INFO: Client connected from <127.0.0.1> 2009-07-08 18:37:30 [4648] [5] DEBUG: Started thread 10 (gw/bb_boxc.c:function) 2009-07-08 18:37:30 [4648] [10] DEBUG: Thread 10 (gw/bb_boxc.c:function) maps to pid 4648. 2009-07-08 18:37:30 [4648] [10] DEBUG: Started thread 11 (gw/bb_boxc.c:boxc_sender) 2009-07-08 18:37:30 [4648] [11] DEBUG: Thread 11 (gw/bb_boxc.c:boxc_sender) maps to pid 4648. 2009-07-08 18:37:30 [4648] [10] DEBUG: boxc_receiver: got boxc_id <smsbox> from <127.0.0.1> 2009-07-08 18:37:33 [4648] [5] INFO: Client connected from <127.0.0.1> 2009-07-08 18:37:33 [4648] [5] DEBUG: Started thread 12 (gw/bb_boxc.c:function) 2009-07-08 18:37:33 [4648] [12] DEBUG: Thread 12 (gw/bb_boxc.c:function) maps to pid 4648. 2009-07-08 18:37:33 [4648] [12] DEBUG: Started thread 13 (gw/bb_boxc.c:boxc_sender) 2009-07-08 18:37:33 [4648] [13] DEBUG: Thread 13 (gw/bb_boxc.c:boxc_sender) maps to pid 4648. 2009-07-08 18:37:33 [4648] [12] DEBUG: boxc_receiver: got boxc_id <smsbox> from <127.0.0.1> 2009-07-08 19:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-08 20:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-08 21:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-08 22:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-08 23:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 00:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 01:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 02:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 03:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 04:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 05:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 06:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 07:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 08:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 09:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 10:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 11:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 12:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 13:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 14:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 15:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 16:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 17:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 18:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 19:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 20:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 21:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 22:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-09 23:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 00:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 01:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 02:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 03:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 04:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 05:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 06:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 07:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 08:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 09:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 10:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 11:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 12:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 13:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 14:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 15:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 16:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 17:37:28 [4648] [9] DEBUG: clear_old_concat_parts called 2009-07-10 18:37:28 [4648] [9] DEBUG: clear_old_concat_parts called ######################################################################################## ########################## BB Log (when Kannel works fine) ############################## 2009-07-06 09:41:23 [4642] [0] INFO: Added logfile `/var/log/kannel/bearerbox.log' with level `0'. 2009-07-06 09:41:23 [4642] [0] INFO: Started access logfile `/var/log/kannel/bearer-access.log'. 2009-07-06 09:41:23 [4642] [0] INFO: HTTP: Opening server at port 55550. 2009-07-06 09:41:23 [4642] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2009-07-06 09:41:23 [4642] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2009-07-06 09:41:23 [4642] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2009-07-06 09:41:23 [4642] [0] DEBUG: starting smsbox connection module 2009-07-06 09:41:23 [4642] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2009-07-06 09:41:23 [4642] [0] DEBUG: Adding smsbox routing to id <smsbox> for smsc id <modemSmsc> 2009-07-06 09:41:23 [4642] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2009-07-06 09:41:23 [4642] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2009-07-06 09:41:23 [4642] [0] INFO: Set SMS resend frequency to 60 seconds. 2009-07-06 09:41:23 [4642] [0] INFO: SMS resend retry set to unlimited. 2009-07-06 09:41:23 [4642] [0] DEBUG: smsbox MO concatenated message handling enabled 2009-07-06 09:41:23 [4642] [0] INFO: DLR rerouting for smsc id <modemSmsc> disabled. 2009-07-06 09:41:23 [4642] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 4642. 2009-07-06 09:41:23 [4642] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 4642. 2009-07-06 09:41:23 [4642] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 4642. 2009-07-06 09:41:23 [4642] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 4642. 2009-07-06 09:41:23 [4642] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 4642. 2009-07-06 09:41:23 [4642] [0] INFO: AT2[modemSmsc]: configuration shows modemtype <WAVECOM> 2009-07-06 09:41:23 [4642] [0] DEBUG: AT2[modemSmsc]: Reading modem definitions from </etc/kannel/kannel.conf> 2009-07-06 09:41:24 [4642] [0] DEBUG: Loading include file `/etc/kannel/smsbox.conf' (on line 100 of file /etc/kannel/kannel.conf). 2009-07-06 09:41:24 [4642] [0] DEBUG: Loading include file `/etc/kannel/modems.conf' (on line 162 of file /etc/kannel/kannel.conf). 2009-07-06 09:41:24 [4642] [0] DEBUG: AT2[modemSmsc]: Found <1> modems in config 2009-07-06 09:41:24 [4642] [0] INFO: AT2[modemSmsc]: read modem definition for <WAVECOM> 2009-07-06 09:41:24 [4642] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2009-07-06 09:41:24 [4642] [0] INFO: DLR rerouting for smsc id <webSmsc> disabled. 2009-07-06 09:41:24 [4642] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4642. 2009-07-06 09:41:24 [4642] [6] INFO: AT2[modemSmsc]: trying to use speed <9600> from modem definition 2009-07-06 09:41:24 [4642] [6] INFO: AT2[modemSmsc]: opening device 2009-07-06 09:41:24 [4642] [6] DEBUG: AT2[modemSmsc]: device opened. Telnet mode = 0 2009-07-06 09:41:24 [4642] [6] DEBUG: AT2[modemSmsc]: device opened 2009-07-06 09:41:24 [4642] [6] INFO: AT2[modemSmsc]: speed set to 9600 2009-07-06 09:41:24 [4642] [6] DEBUG: AT2[modemSmsc]: --> ^M 2009-07-06 09:41:24 [4642] [0] INFO: HTTP: Opening server at port 8100. 2009-07-06 09:41:24 [4642] [0] DEBUG: Started thread 7 (gw/smsc/smsc_http.c:httpsmsc_receiver) 2009-07-06 09:41:24 [4642] [0] DEBUG: Started thread 8 (gw/smsc/smsc_http.c:httpsmsc_send_cb) 2009-07-06 09:41:24 [4642] [0] INFO: HTTP[webSmsc]: Initiated and ready 2009-07-06 09:41:24 [4642] [0] DEBUG: Started thread 9 (gw/bb_smscconn.c:sms_router) 2009-07-06 09:41:24 [4642] [0] INFO: ---------------------------------------- 2009-07-06 09:41:24 [4642] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2009-07-06 09:41:24 [4642] [0] INFO: MAIN: Start-up done, entering mainloop 2009-07-06 09:41:24 [4642] [0] DEBUG: AT2[modemSmsc]: start called 2009-07-06 09:41:24 [4642] [7] DEBUG: Thread 7 (gw/smsc/smsc_http.c:httpsmsc_receiver) maps to pid 4642. 2009-07-06 09:41:24 [4642] [8] DEBUG: Thread 8 (gw/smsc/smsc_http.c:httpsmsc_send_cb) maps to pid 4642. 2009-07-06 09:41:24 [4642] [9] DEBUG: Thread 9 (gw/bb_smscconn.c:sms_router) maps to pid 4642. 2009-07-06 09:41:24 [4642] [5] INFO: Client connected from <127.0.0.1> 2009-07-06 09:41:24 [4642] [5] DEBUG: Started thread 10 (gw/bb_boxc.c:function) 2009-07-06 09:41:24 [4642] [10] DEBUG: Thread 10 (gw/bb_boxc.c:function) maps to pid 4642. 2009-07-06 09:41:24 [4642] [10] DEBUG: Started thread 11 (gw/bb_boxc.c:boxc_sender) 2009-07-06 09:41:24 [4642] [11] DEBUG: Thread 11 (gw/bb_boxc.c:boxc_sender) maps to pid 4642. 2009-07-06 09:41:24 [4642] [10] DEBUG: boxc_receiver: got boxc_id <smsbox> from <127.0.0.1> 2009-07-06 09:41:27 [4642] [5] INFO: Client connected from <127.0.0.1> 2009-07-06 09:41:27 [4642] [5] DEBUG: Started thread 12 (gw/bb_boxc.c:function) 2009-07-06 09:41:27 [4642] [12] DEBUG: Thread 12 (gw/bb_boxc.c:function) maps to pid 4642. 2009-07-06 09:41:27 [4642] [12] DEBUG: Started thread 13 (gw/bb_boxc.c:boxc_sender) 2009-07-06 09:41:27 [4642] [12] DEBUG: boxc_receiver: got boxc_id <smsbox> from <127.0.0.1> 2009-07-06 09:41:27 [4642] [13] DEBUG: Thread 13 (gw/bb_boxc.c:boxc_sender) maps to pid 4642. 2009-07-06 10:24:00 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:05 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:14 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:18 [4642] [6] INFO: AT2[modemSmsc]: Closing device 2009-07-06 10:24:18 [4642] [6] INFO: AT2[modemSmsc]: speed in modem definition don't work, will autodetect 2009-07-06 10:24:18 [4642] [6] DEBUG: AT2[modemSmsc]: detecting modem speed. 2009-07-06 10:24:18 [4642] [6] INFO: AT2[modemSmsc]: opening device 2009-07-06 10:24:18 [4642] [6] DEBUG: AT2[modemSmsc]: device opened. Telnet mode = 0 2009-07-06 10:24:18 [4642] [6] DEBUG: AT2[modemSmsc]: device opened 2009-07-06 10:24:18 [4642] [6] INFO: AT2[modemSmsc]: speed set to 115200 2009-07-06 10:24:18 [4642] [6] DEBUG: AT2[modemSmsc]: --> ^M 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: <-- AT 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:20 [4642] [6] INFO: AT2[modemSmsc]: Closing device 2009-07-06 10:24:20 [4642] [6] INFO: AT2[modemSmsc]: detect speed is 115200 2009-07-06 10:24:20 [4642] [6] INFO: AT2[modemSmsc]: opening device 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: device opened. Telnet mode = 0 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: device opened 2009-07-06 10:24:20 [4642] [6] INFO: AT2[modemSmsc]: Logging in 2009-07-06 10:24:20 [4642] [6] INFO: AT2[modemSmsc]: init device 2009-07-06 10:24:20 [4642] [6] INFO: AT2[modemSmsc]: speed set to 115200 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATZ^M 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ATZ 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: <-- AT 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:20 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT&F^M 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: <-- AT&F 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATE0^M 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ATE0 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+IFC=2,2^M 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CPIN?^M 2009-07-06 10:24:21 [4642] [6] DEBUG: AT2[modemSmsc]: <-- +CPIN: READY 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CMGF=0^M 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CSMS=?^M 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: <-- +CSMS: (0,1) 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:32 [4642] [6] INFO: AT2[modemSmsc]: Phase 2+ is supported 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CSMS=1^M 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: <-- +CSMS: 1,1,1 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CNMI=1,2,0,1,0^M 2009-07-06 10:24:32 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:32 [4642] [6] INFO: AT2[modemSmsc]: AT SMSC successfully opened. 2009-07-06 10:24:34 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:34 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:40 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:40 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:46 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:46 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:52 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:24:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 10:24:58 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 10:25:44 [4642] [6] INFO: AT2[modemSmsc]: Closing device 2009-07-06 10:25:44 [4642] [6] ERROR: AT2[modemSmsc]: Couldn't connect (retrying in 10 seconds). 2009-07-06 10:25:53 [4642] [6] INFO: AT2[modemSmsc]: opening device 2009-07-06 10:25:53 [4642] [6] DEBUG: AT2[modemSmsc]: device opened. Telnet mode = 0 2009-07-06 10:25:53 [4642] [6] DEBUG: AT2[modemSmsc]: device opened 2009-07-06 10:25:53 [4642] [6] INFO: AT2[modemSmsc]: Logging in 2009-07-06 10:25:54 [4642] [6] INFO: AT2[modemSmsc]: init device 2009-07-06 10:25:54 [4642] [6] INFO: AT2[modemSmsc]: speed set to 115200 2009-07-06 10:25:54 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATZ^M 2009-07-06 10:41:24 [4642] [9] DEBUG: clear_old_concat_parts called 2009-07-06 11:16:19 [4642] [6] ERROR: AT2[modemSmsc]: Wrong or no answer to ATZ, ignoring 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ¸AT 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT&F^M 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- AT&F 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATE0^M 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ATE0 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+IFC=2,2^M 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:16:19 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CPIN?^M 2009-07-06 11:16:20 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ERROR 2009-07-06 11:16:20 [4642] [6] ERROR: AT2[modemSmsc]: Generic error: ERROR 2009-07-06 11:16:20 [4642] [6] ERROR: AT2[modemSmsc]: Initialization of device failed. 2009-07-06 11:16:20 [4642] [6] INFO: AT2[modemSmsc]: Closing device 2009-07-06 11:16:20 [4642] [6] ERROR: AT2[modemSmsc]: Couldn't connect (retrying in 10 seconds). 2009-07-06 11:16:30 [4642] [6] INFO: AT2[modemSmsc]: opening device 2009-07-06 11:16:30 [4642] [6] DEBUG: AT2[modemSmsc]: device opened. Telnet mode = 0 2009-07-06 11:16:30 [4642] [6] DEBUG: AT2[modemSmsc]: device opened 2009-07-06 11:16:30 [4642] [6] INFO: AT2[modemSmsc]: Logging in 2009-07-06 11:16:30 [4642] [6] INFO: AT2[modemSmsc]: init device 2009-07-06 11:16:30 [4642] [6] INFO: AT2[modemSmsc]: speed set to 115200 2009-07-06 11:16:30 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATZ^M 2009-07-06 11:41:24 [4642] [9] DEBUG: clear_old_concat_parts called 2009-07-06 11:47:52 [4642] [6] ERROR: AT2[modemSmsc]: Wrong or no answer to ATZ, ignoring 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- T 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT&F^M 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- AT&F 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATE0^M 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ATE0 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+IFC=2,2^M 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CPIN?^M 2009-07-06 11:47:52 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ERROR 2009-07-06 11:47:52 [4642] [6] ERROR: AT2[modemSmsc]: Generic error: ERROR 2009-07-06 11:47:52 [4642] [6] ERROR: AT2[modemSmsc]: Initialization of device failed. 2009-07-06 11:47:52 [4642] [6] INFO: AT2[modemSmsc]: Closing device 2009-07-06 11:47:52 [4642] [6] ERROR: AT2[modemSmsc]: Couldn't connect (retrying in 10 seconds). 2009-07-06 11:48:02 [4642] [6] INFO: AT2[modemSmsc]: opening device 2009-07-06 11:48:02 [4642] [6] DEBUG: AT2[modemSmsc]: device opened. Telnet mode = 0 2009-07-06 11:48:02 [4642] [6] DEBUG: AT2[modemSmsc]: device opened 2009-07-06 11:48:02 [4642] [6] INFO: AT2[modemSmsc]: Logging in 2009-07-06 11:48:03 [4642] [6] INFO: AT2[modemSmsc]: init device 2009-07-06 11:48:03 [4642] [6] INFO: AT2[modemSmsc]: speed set to 115200 2009-07-06 11:48:03 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATZ^M 2009-07-06 11:48:03 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:03 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 11:48:03 [4642] [6] DEBUG: AT2[modemSmsc]: <-- AT 2009-07-06 11:48:03 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:03 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT&F^M 2009-07-06 11:48:03 [4642] [6] DEBUG: AT2[modemSmsc]: <-- AT&F 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: --> ATE0^M 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: <-- ATE0 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+IFC=2,2^M 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CPIN?^M 2009-07-06 11:48:06 [4642] [6] DEBUG: AT2[modemSmsc]: <-- +CPIN: READY 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CMGF=0^M 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CSMS=?^M 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: <-- +CSMS: (0,1) 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:17 [4642] [6] INFO: AT2[modemSmsc]: Phase 2+ is supported 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CSMS=1^M 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: <-- +CSMS: 1,1,1 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT+CNMI=1,2,0,1,0^M 2009-07-06 11:48:17 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:17 [4642] [6] INFO: AT2[modemSmsc]: AT SMSC successfully opened. 2009-07-06 11:48:19 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 11:48:19 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:25 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 11:48:25 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:31 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 11:48:31 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:37 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M 2009-07-06 11:48:37 [4642] [6] DEBUG: AT2[modemSmsc]: <-- OK 2009-07-06 11:48:43 [4642] [6] DEBUG: AT2[modemSmsc]: --> AT^M -- Kenny w: www.nuObjects.com Bulk SMS Solutions | Managed Hosting | Enterprise Application Development 2009/7/19 Nikos Balkanas <nbalka...@gmail.com> > I'm sorry, but without relevant logs with the problem we cannot help you. > > BR, > Nikos > > ----- Original Message ----- > *From:* Kenny Orisanaiye <ken.bell...@gmail.com> > *To:* kannel_dev_mailinglist <de...@kannel.org> > *Sent:* Sunday, July 19, 2009 9:43 PM > *Subject:* Kannel just stop working!! > > Hi, > > Could someone kindly advise me on what the likely problem could be. My > Kannel box on a RedHat box just stop working occasional. A restart get it > running for a few days and then it stops again. usually when it stops the > bearerbox log only shows the following continiously. > > 2009-07-08 20:37:28 [4648] [9] DEBUG: clear_old_concat_parts called > > HINT: This box uses a Wavecom Modem as SMSC fro inbound sms > > Kinldy advise. TIA. > > > -- > Kenny > > w: www.nuObjects.com > > Bulk SMS Solutions | Managed Hosting | Enterprise Application Development > >
