Hi, So in effect, uppercase or lowercase would work. Is that? Then consistency is that is needed.
-- Kenny e: ke...@nuobjects.com w: www.nuObjects.com Bulk SMS Solutions | Managed Hosting | Enterprise Application Development 2009/10/7 Nikos Balkanas <nbalka...@gmail.com> > Hi, > > Just a note to avoid confusion. In the cvs modems.conf id, wavecom is in > lower case: > > group = modems > id = wavecom > name = Wavecom > detect-string = "WAVECOM" > Therefore if working with that, modemtype in group smsc should also be: > > modemtype = wavecom > > as well. > > BR, > Nikos > > ----- Original Message ----- > *From:* Kenny Orisanaiye <ken.bell...@gmail.com> > *To:* elvis.jo...@etgtel.com > *Cc:* users@kannel.org > *Sent:* Wednesday, October 07, 2009 1:08 AM > *Subject:* Re: problem with GSM Modem > > Hi Elvis, > > I also use Wavecom Fastrack Supreme and after much trial and errors with > the setting i discoved that the default settings works just fine for us. > Below is an extract from our config. > > ######################## > group = modems > id = WAVECOM > name = "WAVECOM" > detect-string = "WAVECOM" > ######################## > > ######################## > group = smsc > smsc = at > smsc-id = mSmsc > modemtype = WAVECOM > device = /dev/ttyS0 > my-number = ************ > connect-allow-ip = ****** > log-level = 0 > ######################## > > Additionally, you need to be sure your modem is on */dev/ttyS0* . If you > are using Linux, run > > # wvdialconf /etc/wvdial.conf > > This will do a scan and give you a visual display of the available modem > and 'location'. > > > -- > Kenny > > e: ke...@nuobjects.com > w: www.nuObjects.com > > Bulk SMS Solutions | Managed Hosting | Enterprise Application Development > > > On Tue, Oct 6, 2009 at 2:50 PM, Elvis Manuel Jorge <elvis.jo...@etgtel.com > > wrote: > >> I did that you told me Alejandro but It didn't work I'm having the same >> error, somebody that has worked with Wavecom modem help me. >> >> Thanks >> >> On Mon, 2009-10-05 at 23:10 +0200, Alejandro Guerrieri wrote: >> > Try changing "wavecom" for "WAVECOM" on the detect-string. >> > >> > >> > Regards, >> > >> > >> > Alex >> > >> > On Mon, Oct 5, 2009 at 10:58 PM, Elvis Manuel Jorge >> > <elvis.jo...@etgtel.com> wrote: >> > Hello all... >> > >> > I had configured kannel to use my cellphone (Sony Ericsson >> > P1i) as >> > modem, but know I bought a Wavecom Fastrack Supreme 20 modem >> > and I've >> > couldn't configure correctly, here they are the errors and my >> > configuration file. Please I need you to help me. >> > >> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: --> ATI^M >> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: <-- WAVECOM >> > WIRELESS CPU >> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: <-- MULTIBAND >> > G850 >> > 1900 >> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: <-- OK >> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: Cannot detect >> > modem, >> > using generic >> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: Reading modem >> > definitions from <smskannel2.conf> >> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: Found <1> >> > modems in >> > config >> > 2009-10-05 16:49:18 [3143] [6] PANIC: AT2[gsm]: Cannot detect >> > modem and >> > generic not found >> > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox(gw_panic >> > +0xc2) >> > [0x80cbf72] >> > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox [0x806ca22] >> > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox [0x806d5b1] >> > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox [0x80c2831] >> > 2009-10-05 16:49:18 [3143] [6] PANIC: /lib/libpthread.so.0 >> > [0x72b50b] >> > 2009-10-05 16:49:18 [3143] [6] PANIC: /lib/libc.so.6(clone >> > +0x5e) >> > [0x66cb2e] >> > >> > group = core >> > admin-port = 13000 >> > smsbox-port = 13001 >> > admin-password = bar >> > admin-allow-ip = "*.*.*.*" >> > log-file = "/var/log/kannel/kannel.log" >> > log-level = 0 >> > access-log = "/var/log/kannel/access.log" >> > >> > group = modems >> > id = wavecom >> > name = "wavecom" >> > detect-string = "wavecom" >> > init-string = "ATZ" >> > init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >> > >> > group = smsc >> > smsc = at >> > modemtype = auto >> > smsc-id = gsm >> > device = /dev/ttyS0 >> > my-number = +18298666697 >> > sms-center = +18098599999 >> > log-level = 0 >> > >> > group = sendsms-user >> > username = tester >> > password = foobar >> > user-allow-ip = "*.*.*.*" >> > >> > group = sms-service >> > keyword = nop >> > text = "You asked nothing and I did it!" >> > >> > group = sms-service >> > keyword = default >> > catch-all = yes >> > accept-x-kannel-headers = true >> > assume-plain-text = true >> > text = "No service specified" >> > -- INSERT -- >> > >> > >> > >> > >> > >> > >> > >> >> >> >
