Thanks Nikos I will check this.
Emmanuel 2009/12/4 Nikos Balkanas <n...@amdtelecom.net> > Hi, > > I am not saying that it is an M20 problem in general. Just a problem > with your particular modem. If it were a configuration issue (sim-buffering, > etc.) I would expect not to get *any* messages. It is not normal behaviour > to get only part of the message. Maybe a problem with your SIM. Have you > tried changing it? Anyway, CMEE might be able to tell you more. > > BR, > Nikos > > ----- Original Message ----- > *From:* Emmanuel CHANSON <emmanuelchan...@gmail.com> > *To:* users <users@kannel.org> > *Sent:* Friday, December 04, 2009 11:54 AM > *Subject:* Re: Kannel CVS and DLRs MySQL storage / "can not decode PDU to > a message" > > Thanks Nikos for your reply, > > But I am a little bit surprised about > *As the rest goes, the advice is simple: Use another modem.* > > Siemens M20 is listed as a modem that works with Kannel and I'm surprised > to be the first one who use DLR with M20 modem and discover this ? > I think some people already were faced to this issue? > Is it not a configuration issue? like init-string or something else? > > Regards, > > Emmanuel > > 2009/12/4 Nikos Balkanas <n...@amdtelecom.net> > >> Hi, >> Β >> You obviously don't set dlr-url in your configuration or ssendsms URL. DLR >> table is just used for internal kannel processing. Once the final DLR >> (success or fail, 1 or 2) is received, the entry is deleted. That's why you >> cannot use it for permanent DLR storage. Of course you always get your >> permanent DLR records in your access logs, however, you might want the in >> your DB for greater customization/flexibility/ manipulation. That's what >> dlr-url does for you. It is your responsibility to provide the web service >> customized the way you want,Β to displayΒ to your clients. >> Β >> As the rest goes, the advice is simple: Use another modem. If you want to >> debug it, append to init-string in your modem definition: >> Β >> "...;+CMEE=1" or 2. >> Β >> But it seems to me a waste of time. >> Β >> BR, >> Nikos >> >> ----- Original Message ----- >> *From:* Emmanuel CHANSON <emmanuelchan...@gmail.com> >> *To:* users <users@kannel.org> >> *Sent:* Friday, December 04, 2009 5:39 AM >> *Subject:* Re: Kannel CVS and DLRs MySQL storage / "can not decode PDU to >> a message" >> >> Adding some informations, >> >> I notice when using a Nokia 6230 on another kannel server that it works >> well and I have the following: >> >> >> ==> /var/log/kannel/access.log <== >> 2009-12-04 14:08:20 Receive DLR [SMSC:nokia6230] [SVC:alt] [ACT:] [BINF:] >> [FID:48] [from:687971204] [to:+687773502] [flags:-1:-1:-1:-1:1] >> [msg:7:Success] [udh:0:] >> >> ==> /var/log/kannel/kannel.log <== >> 2009-12-04 14:08:20 [11952] [6] DEBUG: AT2[nokia6230]: <-- +CDS: 24 >> 2009-12-04 14:08:20 [11952] [6] DEBUG: AT2[nokia6230]: <-- >> 069186770720F10630099186773705F2902140410291449021404102914400 >> 2009-12-04 14:08:20 [11952] [6] DEBUG: AT2[nokia6230]: received message >> from SMSC: +687770021 >> 2009-12-04 14:08:20 [11952] [6] DEBUG: AT2[nokia6230]: got STATUS-REPORT >> for message <48>: >> 2009-12-04 14:08:20 [11952] [6] DEBUG: AT2[nokia6230]: Numeric receiver >> (international) <+687773502> >> 2009-12-04 14:08:20 [11952] [6] DEBUG: DLR[internal]: Looking for DLR >> smsc=nokia6230, ts=48, dst=+687773502, type=1 >> 2009-12-04 14:08:20 [11952] [6] DEBUG: DLR[internal]: created DLR message >> for URL <> >> 2009-12-04 14:08:20 [11952] [10] DEBUG: send_msg: sending msg to box: >> <127.0.0.1> >> 2009-12-04 14:08:20 [11952] [10] DEBUG: boxc_sender: sent message to >> <127.0.0.1> >> 2009-12-04 14:08:20 [11952] [6] DEBUG: AT2[nokia6230]: --> AT+CNMA^M >> 2009-12-04 14:08:20 [11952] [9] DEBUG: boxc_receiver: got ack >> 2009-12-04 14:08:20 [11952] [6] DEBUG: AT2[nokia6230]: <-- OK >> >> instead of this for Siemens M20 modem: >> >> 2009-12-04 13:34:28 Receive DLR [SMSC:SiemensM20] [SVC:tester] [ACT:] >> [BINF:] [FID:40] [META:] [from:+687755632] [to:+687773502] >> [flags:-1:-1:-1:-1:8] [msg:4:ACK/] [udh:0:] >> >> >> 2009-12-04 13:34:35 [4088] [6] DEBUG: AT2[SiemensM20]: <-- +CDS: 24 >> 2009-12-04 13:34:35 [4088] [6] DEBUG: AT2[SiemensM20]: <-- >> 0628099186773705F2902140316471449021403164714400 >> 2009-12-04 13:34:35 [4088] [6] DEBUG: AT2[SiemensM20]: received message >> from SMSC: 09019687773 >> 2009-12-04 13:34:35 [4088] [6] ERROR: AT2[SiemensM20]: could not decode >> PDU to a message. >> >> You can notice that there is 62 - 48 characters missing in the second >> test: >> Nokia phone has send a DLR with 62 char: >> 069186770720F10630099186773705F2902140410291449021404102914400 >> >> and Siemens M20 only 48 char (the last 48 in fact I think): >> ??????????????0628099186773705F2902140316471449021403164714400 >> and can not decode PDU. (48 char) >> >> Any idea why ? >> >> Emmanuel >> >> 2009/12/4 Emmanuel CHANSON <emmanuelchan...@gmail.com> >> >>> Hi everybody, >>> >>> Below an issue I am faced trying to configure DLR management and kannel. >>> >>> Environnement: >>> Kannel CVS 20091124 installed using RPM patch from Alejandro >>> MySQL DLR storage configured >>> >>> Issue: "can not decode PDU to a message" >>> >>> I have configure DLR to use mysql (config file below) >>> >>> I send a SMS using this command: >>> >>> # lynx -dump " >>> http://localhost:13013/cgi-bin/sendsms?username=tester&password=foobar&from=%2B687755632&to=%2B687773502&text=SMStestdepuisNavette&dlr-mask=31 >>> " >>> >>> Firstly I saw the following error in kannel.log >>> 2009-12-04 13:41:59 [4163] [6] DEBUG: AT2[SiemensM20]: <-- +CDS: 24 >>> 2009-12-04 13:41:59 [4163] [6] DEBUG: AT2[SiemensM20]: <-- >>> 0629099186773705F2902140313504449021403135044400 >>> 2009-12-04 13:41:59 [4163] [6] DEBUG: AT2[SiemensM20]: received message >>> from SMSC: 09019687773 >>> 2009-12-04 13:41:59 [4163] [6] ERROR: AT2[SiemensM20]: got +CMT but >>> pdu_extract failed >>> >>> I check some forum about this issue and I set one parameter in >>> modems.conf: >>> broken = true >>> >>> And I see in the kannel.log file now the following error: >>> >>> 2009-12-04 13:34:35 [4088] [6] DEBUG: AT2[SiemensM20]: <-- +CDS: 24 >>> 2009-12-04 13:34:35 [4088] [6] DEBUG: AT2[SiemensM20]: <-- >>> 0628099186773705F2902140316471449021403164714400 >>> 2009-12-04 13:34:35 [4088] [6] DEBUG: AT2[SiemensM20]: received message >>> from SMSC: 09019687773 >>> 2009-12-04 13:34:35 [4088] [6] ERROR: AT2[SiemensM20]: could not decode >>> PDU to a message. >>> >>> And 09019687773 seems to be my destination number 09019 (unknown???) >>> 687773 but the end 502 are missing. >>> The destination is +687773502. >>> >>> I did not find any solution to my issue...any idea, it seems Siemens M20 >>> modem can not decode DLR PDU ? >>> >>> BTW for what is dedicated the dlr-url parameter ? To execute some script >>> in order to process DLR info in a third party application database? >>> If juste kannel is used, is the dlr table enough usefull to get the SMS >>> delivery status? (always 0 in my case, even if mobile is switch off) >>> >>> Regards, >>> >>> -- >>> Emmanuel >>> @email : emmanuelchan...@gmail.com >>> >> >> >> >> -- >> Emmanuel >> >> CHANSON Emmanuel >> Mobile Nouvelle-CalΞΉdonie: +687.77.35.02 >> >> Mobile France: +33 (0) 6.68.03.89.56 >> @email : emmanuelchan...@gmail.com >> >> > > > -- > Emmanuel > > CHANSON Emmanuel > Mobile Nouvelle-CalΓ©donie: +687.77.35.02 > > Mobile France: +33 (0) 6.68.03.89.56 > @email : emmanuelchan...@gmail.com > > -- Emmanuel CHANSON Emmanuel Mobile Nouvelle-Calédonie: +687.77.35.02 Mobile France: +33 (0) 6.68.03.89.56 @email : emmanuelchan...@gmail.com
